Get started
Connect the power adapter to the power cable and plug it
into the back of the card machine.
Your customers can choose to pay by tapping, inserting or
swiping their card.
Contactless cards can be used for transactions up to
£45 and smart devices such as phones can be used for
any amount.
Plug one end of the Ethernet cable into the back of the card
machine. The other end should be connected to your router.
Or, you can insert directly into the wall if you have a network
port installed.
To turn your machine on, hold down the power button for
2-4 seconds. Follow the steps on-screen to set up your
machine. You’ll need the activation code we sent you to
complete the process.
Plug it in
Connect Ethernet cable
Power it up
Taking payment
1
2
3
Having problems? Try these steps:
Troubleshooting tips
Hold down the power button, then press ‘Reboot’.
Make sure all cables are rmly connected.
No internet? There could be a problem with your
connection. Check your router, and contact your network
provider if it still won’t connect.
Still having problems? Call us on the number at the back of
this guide.
Restart your machine
Check your power and connection
1
2
Power button
