Dok CR28 User manual

CR28
 Charges and Holds 3 Devices in Cradle Holders
Wirelessly Plays Music and Answers Calls FM Clock Radio With Alarm 
 SCD (Smart Current Detection) Technology
Tidy-Cable Organizer
Universal Multi-
Charging Station
Remove
ablets & MIDs
T
Remove

Features
01
Contents
Thank you for purchasing our product. For operation and security, read this manual carefully and
keep it handy for future reference.
MULTI-CHARGER DOCKING STATION
SCD Technology
Features "Smart Current Detection" (SCD) that ensures device protection by adjusting the
current/voltage required for each device. It will stop when your device is fully charged and will not
overcharge.
Easy Access
Cradle and hold 3 smart devices while charging and viewing. Vertical USB Charging Ports allow
you to plug in your devices easily.
Speaker System
Play and Charge Multiple Devices simultaneously.
Display, listen and view one device while charging others.
Organization
The Tidy-Cable Organizer and 3 Cradle Holders eliminate the need to charge multiple devices in
multiple locations. Hide and store excess cables and eliminate the clutter.
• Wireless Bluetooth Speaker System
Hands-Free phone while charging and playing music.
•
•
•
•
Note: Recognizes all smart devices (phones and tablets) of 5V from 0-2.1A.
Contents.........................................................................................................................................01
Features..........................................................................................................................................01
Warnings and Precautions...........................................................................................................02
Important Safety Instructions......................................................................................................03
Quick Start On Charging Your Device....................................................................................04-08
What’s in the Gift Box...................................................................................................................09
Location of Functions...................................................................................................................10
Operation..................................................................................................................................1 1-14
Troubleshooting............................................................................................................................15

02
CAUTION
MOISTURE AND CONDENSATION
For units with an insertable AC Power Adapter
cordset:
• The power adapter should remain operable for its
intended use. Disconnect the AC Power Adapter
if you are not intending to use the unit for a long
period of time.
• When connecting or disconnecting the AC Power
Adapter Cord, grip the plug and not the cord
itself. Pulling the cord may cause damage and
create a hazard.
For units with a Rechargeable Battery:
• Do not expose batteries to excessive conditions
– extreme cold, heat, sun or fire.
SAFETY
WHEN IN USE
FCC INFORMATION
WARNING:
CAUTION:
To reduce the risk of fire or electric
shock, do not expose this unit to rain or moisture.
Use of controls or adjustments or
performance of procedures other than those
specified may result in hazardous radiation
exposure.
“Caution Marking and Rating Label” is affixed
under the lid or on the bottom of the unit with a
mass not exceeding 7kg.
3183565
RISK OF ELECTRIC SHOCK,
DO NOT OPEN.
CAUTION: TO PREVENT THE RISK OF
ELECTRIC SHOCK – DO NOT REMOVE
COVER OR BACK. NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED PERSONNEL.
This symbol is intended to alert you to
the presence of uninsulated, dangerous
voltage within the unit's enclosure that
might be of a sufficient magnitude to
constitute a risk of electric shock. DO
NOT OPEN THE UNITS CASE.
This symbol is intended to inform you
that important operating and
maintenance instructions are included in
the literature accompanying this
product.
If the unit is exposed to moisture and extreme
cold temperatures and moved to a warm
environment, condensation may form on the units
internal components. Under these
circumstances, turning the power “ON” may
cause damage to the unit or cause harm to the
user. Allow the unit to stand in a warm
environment for 1 to 3 hours and allow the unit to
air dry safely.
• Do not use this unit in conditions that are
extreme – hot, cold, dusty or humid.
• Do not restrict the air flow of the unit by placing
it on a soft surface like a bed, carpet or
covering.
This unit complies with part 15 of the “FCC
Rules.” Operation is subject to the following
conditions:
1. This unit may not cause harmful interference.
2. This unit must accept any interference
received, including interference that may
cause undesirable operation.
Double insulation.
This is a Class II apparatus.

03
1. Read These Instructions: All
safety and operations manual should
be read before the product is
operated.
2. Keep These Instructions: The
safety and operations manual should
be retained for future reference.
3. Heed All Warnings: All warnings
applicable to the unit and in the
operations manual should be adhered
to.
4. Follow All Instructions: All
operations manual should be
followed.
5. Water and Moisture: Do not use
this unit near water. For example, do
not use near a bath tub, wash bowl,
kitchen sink, or laundry tub. Do not
use this unit in a wet basement or
near a swimming pool or similar
location. The unit shall not be
exposed to dripping or splashing and
no objects filled with liquids (ex:
vases), shall be placed on or near
this unit.
6. Cleaning: Clean the unit only with
a dry cloth. Unit must be unplugged
from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol
cleaners on the unit.
7. Ventilation: Slots and openings in
the cabinet of the unit are provided to
ensure reliable operation and
ventilation and to protect the unit from
overheating. The openings must not
be covered and should never be
blocked by placing the product on a
soft surface like a bed, sofa, or rug.
This unit should not be placed in a
built-in installation like a bookcase or
rack, unless proper ventilation is
provided.
8. Heat: Do not install the unit near
any heat source like a radiator, heat
register, stove or other device that
produces heat, including amplifiers.
9. Grounding or Polarization: If
applicable, do not disable or
circumvent the polarized or
grounding-type plug. A polarized plug
has 2 blades with 1 wider than the
other. A grounding-type plug has 2
rd
blades and a 3 grounding plug. The
rd
wide blade, or the 3 prong, is
provided for your safety. If the
provided plug does not fit into an
outlet, consult a qualified electrician
for replacement of this outlet.
10. Power Cord Protection: Protect
the power cord from being walked on,
pinched or cut or damaged in any
way. If any damage occurs, consult
with a trained technician for repair.
11. Accessories: Only use
accessories specified and approved
by the manufacturer. Do not place this
unit on an unstable cart, stand, tripod,
bracket or table that has not been
previously approved by the
manufacturer. This unit may fall,
causing serious injury to a child, adult
or to the unit itself. Any mounting of
the unit should be done within the
manufacturer's guidelines.
12. Transporting: If a pre-approved
device is used to transport this unit,
caution and care must be observed
and practiced to avoid damages.
Make sure the device and unit
together are stable before moving.
13. Lightning: Unplug this unit and
disconnect the antenna or cable
system during lightning storms or
when unused for long periods of time.
This will help prevent damage to the
unit due to lightning and power line
surges.
14. Servicing: Do not attempt to
service this unit yourself. Opening or
removing covers may expose you to
dangerous voltage or other hazards.
Refer all servicing to a qualified
service technician.
15. Power Sources: Only connect to
the type of household power supply as
indicated in the operations manual and
“Caution Marking and Rating Label.” If
you are not sure of the type of power
supplied to your home (or location of
the outlet the unit is being plugged
into), consult with the local power
company. For units intended to
operate from battery power, or other
sources, refer to the manufacturer's
operations manual.
16. Overloading: Do not overload
wall outlets or extension cords. This
can result in a risk of fire or electric
shock and may be hazardous.
17. Foreign Material: Protect this unit
from intrusion of any foreign
substances like dirt, water, moisture
and insects. Do not force any foreign
materials or chemicals into this unit.
This could result in a risk of fire or
electric shock and may be hazardous.
18. Replacement Parts and Safety
Check: When replacement parts are
required, be sure the service
technician has used replacement parts
specified and approved by the
manufacturer. Ask the service
technician to perform safety checks to
ensure the proper operation to avoid
possible fire, electric shock or other
hazards.
19. Outdoor Antenna Grounding: If
an outside antenna or cable system is
connected to the unit, be sure the
antenna or cable system is grounded
to provide some protection against
voltage surges and built-up static
charges. If there is any doubt to the
proper grounding of these systems,
contact a qualified electrician to
inspect your location.
20. Wall or Ceiling Mounted: The
unit should be mounted to a wall or a
ceiling only as recommended by the
manufacturer.
21. Disconnect Device: Make sure
all disconnect devices are in proper
working condition and readily available
in the event of an emergency or if
power “off ” is needed quickly.
22. Protective Attachment Plug: If
applicable, this unit may be equipped
with an attachment plug having
overload protection. This is a safety
feature. See the operations manual
for replacement or resetting of this
protective device. If replacement of
the plug is required, be sure the
qualified service technician has used a
replacement plug specified by the
manufacturer that has the same
overload protection as the original
plug.
23. Power Lines: An outside antenna
system should not be located in the
vicinity of overhead power lines or
other electric light or power circuits, or
where it can fall into such power lines
or circuits. When installing an outside
antenna system, extreme care should
be taken to keep from touching such
power lines or circuits, as contact with
them may be fatal. Always consult
with your local power company before
installing an outside antenna.

Quick Start On Charging Your Device
04
How to Charge Your Devices
1. Connect the charging cable to your device:
Connect Unit to Power Outlet
Phones
Plug the small end of included AC/DC power adapter into the DC POWER INPUT
on the rear of unit and connect power adapter to an AC power outlet to power the
unit. Press the STANDBY ( ) button to power ON/OFF.
Tablets & MIDs
Other Devices
If necessary, disconnect your USB cable from your existing smart phone
power adaptor, then use the charging cable that comes with your phone.
NOTE: Older model phones may not come with a USB charging cable. Contact
your phone's service provider or review the cables available in this catalog.
Remove USB cable
from 120V adaptor
Remove Items from Package

2. Connect your device to 1 of the 3 USB Charging Ports, as per below:
3. Wrap your cord to the Tidy-Cable Organizer:
05
Quick Start On Charging Your Device
For smart phones and
small devices, all 3 USB Charging Ports may be used.
Please use the RED USB
Charging Port for use with Tablets and/or smart devices
requiring DC 5V/2.1A.
PLEASE NOTE:
A. The RED USB Charging Port provides a maximum of 2.1A charging current designated to charge most 5V
smart devices. It could take longer to fully charge smart devices that exceed 2.1A.
B. Even in the OFF mode, as long as an active power is connected to the unit, your smart device can be
charged still.
"
7
~
"
6
e
v
a
e
L

4. Your 's shape will determine if an insert is needed. Use the insert for
flat-bottom phones. Round-bottom phones do not need the insert;
smart device
5. Wrap excess cable around cable organizer leaving enough cable to allow phone to be
inserted into cradle;
A
For FLAT-BOTTOM phones
a. For flat-bottom phones;
B
For ROUND-BOTTOM phones
Optional Insert
06
Quick Start On Charging Your Device
remove
b. For round-bottom phones, remove the insert.
Place the
DEVICE into
the insert.
Place the
DEVICE
directly into
cradle.
Place the
INSERT into
the cradle.

c. For TABLETS & MIDs;
• USE WITH FIXED
CRADLES: Insert
Charging Cable and
place smart device to
the 2 FIXED cradles
(Vertically or
Horizontally).
Quick Start On Charging Your Device
07
1. PUSH
2. LOCK
• USE WITH DETACHABLE CRADLE (included):

08
Quick Start On Charging Your Device
6. Disconnect the smart device from the USB Charging Cable and leave Charging
Cable plugged into the Charging Station for easy re-connection.