DOM Track User manual

Scan the QR code to register your product
https://dreamonme.com/customercare/registration/

2

3
Parts List
Thank you for choosing Dream On Me and congratulations on
joining The DOM Family, a family that has been transforming lives
for 30 years! We appreciate your feedback and wish you the very
best in the coming years with your new addition. If you have any
questions or concerns please don’t hesitate to reach out and a
trusted DOM representative will assist you. Thank you again for
entrusting us to supply you with the safest, functional and
affordable baby products and accessories. Feel free to follow us
on Facebook and Instagram for further opportunities and offers.

4

To Attach Basket
1. Align the Basket Tube with the Basket Frame
in the rear of the stroller as shown.
Press in spring loaded buttons on Basket Tube and
slide into the Basket Frame until both buttons click into
3. Unroll the basket over center bar of stroller frame as shown.
In the middle & front of the stroller, secure the 4
sets of snaps on the basket around the stroller frame.
5. Secure the 6 sets of snaps at the back end of the
basket around the Basket Tube as shown.

6
simply

7
1.
the
the
1.

8
3. Push both brake assemblies onto rear leg tubes at
the same time until spring loaded buttons click into
NOTE: If brake assemblies do not click and hold in place, the spring button
stuck not protruding through the hole in the tube. Use a
screwdriver or pliers to move the button so that it protrudes out of the hole
in the tube.
Slide Rear Wheel onto axle.
5. Slide Washer onto axle.
6. Fit the straight part of the Cotter Pin
through hole on axle as shown.
Line up tabs in the Hub Cap with slots in
the wheel, snap hub cap into place.
Repeat for second side.

To Attach Reversible Seats
When using this product with only one child, only use the seat position.
Reversible Seats can be positioned in
these directions:
A. Facing Parent
B. Facing Away from Parent
C. Facing Each Other
D. Back to Back
E. One child Use (Seat must be
attached on front frame hub to avoid
tipping)
1. Align Reversible Seat catches over frame hubs as
shown and push Reversible Seat down onto the
frame hubs until a “Click” is heard on both sides.
The button on the frame hubs should be seen through both Reversible Seat catches.
Pull up on the seat to make sure the seat is securely attached.
9
3. Repeat steps 1 and 2 for the other reversible seat.
To remove reversible push both buttons on the frame hub in, the
Reversible seat up.

To Attach Front Bars
CAUTION
To prevent injury to your child, take care when inserting bar into frame.
1. Align Front Bar pins over the holes on the Seat
Catch and push in until a “Click” is heard on both sides.
Repeat this tep for other Front Bar.
To child in/out of Reversible push on
one side of the Front Bar release button the
Front Bar out. The Front bar will now swivel outward.
Repeat tep 1 to reinsert Front Bar.
To remove Front Bar, push both Front Bar release buttons out.
Repeat tep to reinsert.
10