Domenor D57 User manual

HD_Video Conference Camera
User Manual

¿
TABLE OF CONTENT
Precaution
Function instruction
positions of control system
Functions of remote controller
Instruction
Performance
Installation instruction
Pan/Tilt operation
camera control
Memory settings
dome parameter
camera parameter
performance & features
Application system diagram
Dimension
Maintenance service terms
Standard Definition operation illustration
System setting
System setting
setting

1. Precaution
Electrical Safety
Transportation with care
Installation with care
Requirements to service personnel
Do not disassemble the Pan/Tilt module
Environmental Requirements
Don't
Confirm country and local electrical safety standard when using or installing the product
The product itself has no power switch Please stop power supply or plug out power socket when it
is not in good working Vide
Product should be protected against extremes of pressure, vibration and humidity during transportation,
storage and installation. It is transported by integrated packing style
Pleas
e, which may cause malfunction; the camera parts belong to senior optical
products, please do not touch it by your hand in order to avoid scratch for protecting the imaging quality
All the service work should be done by qualified technicians
Do not disassemble screws and repair the parts of the Pan/Tilt module by yourself. Only qualified and
professional personnel can do this job
Environmental temp: -40~+60 Humidity: <95%
Air Pressure: 86~106 Kpa Power supply:DC12V 2V
Power consumption: Maximum 12W DC12V
o wire and control wire should be insulated and individual connected can
not mix-up with other wires
e read carefully user installation manual when installation Please pick up the camera parts
gently and do not press it, or els
Don't focus the camera on objects with strong light. Don't focus the camera direct to the sun or
other bright objects no matter when in use or not. Otherwise ,it may affect image quality
focus the camera on objects with strong light
Precaution

2. Application system diagram
Standard Definition camera operation illustration. for instance as below:
Operation illustration
Power cord(supplied)
To AC outlet
AC power adaptor
MPA-AC1(supplied)
To DC IN 12V
Computer,TV
or VCR with a
video input jack
To VISCA IN of
other EVI-D70/D70 Ps
To VISCA IN
RS-232C OUT
To VISCA RS-232C IN To RS-232C
To HDMI VIDEO
YPbPr cable
YPbPr VIDEO
To TV input
To Video input
Video cable
To VIDEO
To S VIDEO
Pb
Y
Pr

Performance
3.2 Camera parameter
3.1 Camera parameter
3. Performance
Electricity
Decoder Built in
Power supply
Power consumption
Rotation speed
Pan
Operation
Pan rotation
Environmental
Working
environmental temperature
Communications
Baud rate
Protocol
Address setting
Presets
Remote controller 9
Visca protocol 128
Stand-up position
Tilt rotation
Environmental humidity
No-condensation
net weight
Installation
Physical
20X Optical,12X Digital
4.7-94 mm()
Auto/Manual
Off/No
50dB
SDI
Off/No/Auto
24
KSS 20 Color
1/2.8Type Exmor CMOS Sensor
1.7lux/0.005lux
2 Mega pixel
720P50/60 1080I50/60 1080P25/30 (Optional)
PAL/NTSC
1/1-1/10000
55.4 (W)-2.9 T()
Signal system
Imaging element
Scanning system
Effective pixel (H V)
Minimum illumination
Zoom
Focus
Angle Field of view
IRIS Control
Focusing system
White balance
Back -light compensation
S/N ratio
Electronic shutter speed
Video output port
Wide Dynamic Range
Privacy zone masking
Model
Spec
Auto/Manual
Auto/Manual

Performance&Features
Ø
Ø
Ø
System
Input/Output port:
Features
Video signal: PAL color
Pixel:
Minimum distance for imaging: (wide view, the nearest settings under Visca protocol):10mm
S/N Ratio: 50 dB
Pan/Tilt: Pan 170 , maximum speed:100 /S
Tilt:+90 , -30 , maximum speed: 90 /S
Output: RCA tone socket 1vpp, 75 ohm, Non-balance Sync: Negative
Input/Output control connection port: Visca RS-232C: 8-Core Minisize DIN (input:1; output:1)
Mode of signal control: 9600bps data:8 bit Stop bit:1
Power connection port: JEITA 4
With Fast, wide Pan/Tilt functions
With RS-232C communication and Visca protocol, can control video conference camera by terminal
equipment and computer
Improved quality and definition of digital zoom image by the newest development digital signal
processor (DSP)
Can remove and attenuate IR light by attenuation-filter Besides, this filter can open and close
automatically; it provides image with good quality in high definition and strong brightness in large
scope
Can save 9 presets in memory, it's available for working when necessary
With 1 Multi function IR Remote controller, which is easily and convenient to control video con
ference camera
2mega
3.3 Performance&Features
Remark The parameter for each video camera module is different; please refer to the details in
Chapter 3.2
4

4. Functions
4.1 positions of control system
Lens
(may fix wide lens)
Sensor of remote
controller.
light of power
light of standby
Functions
Video interface
VIDEO
YPbPr HDMI
IN RS-232C OUT
DCIN12V
YPbPr interface
HDMI Interface
Input interface
Output interface
DC 12v Power input interface

4.2 Dimension
The HighSize for definition video conference camera is as below:
POWER STANDBY
131.56
110
154
165
142
66 8
3030
9090
175175
175175
1/4-20 UNC,
6.5mm
Screw thread
Screw thread
1/4-20 UNC,
6.5mm
14
8
Functions
6

4. 3 Functions of remote controller
POWER
DATA SCREEN
BACK LIGHT
AUTO
FAR
NEAR
MANUAL
POSITION
PRESET
RESET
HOME
SLOW T
SLOW W
FAST T
FAST W
L/R DIRECTION/SET
open/close power
press for back light compensation.
press for auto-focus.
press for far zoom, focus on objects in far distance
press for near zoom, focus on objects in near distance.
press for Manual Auto/ focus.
Setting for preset and reset.
press any number from 0-9 within 2 seconds
after press preset to set preset.
press any number from 0-9 within 2 seconds
after press reset to delete preset.
Press any number to see preset.
press this key to set position in central of front side.
focus on near object slowly
focus on far object slowly
focus on near object fast
focus on far object fast
1.press 1 in 2 seconds
after press this key, camera start left to right rotation
under upside installation style; Press 2 in 2 seconds after
press this key, camera start left to right rotation under
upside-down installation style.
Enter OSD Menu, Continuous press 6 times (Every time
must be around 1 second), Restart may make the dome restore factory default.
11
12
13
10
Notes:
1. if the remote controller doesn't work, please change batteries.
2. camera can not work if there is any block between remote controller and camera, please make sure the
controller is direct to the sensor when using.
7
POWER
DATA SCREEN BACK LIGHT
AUTO
FOCUS
MANUAL
NEAR
FAR
STD REV
123
456
789
PRESET RESET
POSITION
PAN-TILT
HOME
SLOW
ZOOM
FAST
L/R
DIRECTION SET
3
5
7
1
2
46
8
9
10
11
12
13
Functions

Instruction
5. Instruction
5. 1 Pan/Tilt operation
1. Press direction keys to change the direction. If need to change vision angle of camera, please press the
right direction key. Press short time for slow moving, press long time for fast moving.
2. Press "Home" to set position in central of front side.
5. 2 Camera control
Focus
1. Auto focusing: press auto , camera will focus on the central object.
2. Manual focusing: press manual to switch auto and manual focusing. Under model of manual
focusing , press far to set focus in far distance, press near to set focus in near distance.
8

ØBack light imaging
Light behind of the object, which will be black, press back light for compensation.
Press again for cancel this function.
T
W
W
L/R
DRECTION SET
press to near zoom
(far view)
press to far zoom
wide view
change zoom slowly
(slow)
change zoom fast
(fast)
T
W
L/R
DRECTION SET
T
W
T
L/R
DRECTION SET
ØChange focus
Press any button of zoom to realize different zoom.
AUTO FAR
FOCUS
MANUALNEAR
Far zoom near zoom
DATASCREEN BACK LIGHT
Instruction
9

5. 3 Memory settings-preset function
Can set 9 combinations of presets: position, zoom and back light etc.
1. Confirm standby with no glitter.
2. Adjust camera position, zoom and focus on back light.
3. Keeping press preset key, then press any number 1-9 to save presets.
Choose memory settings
Delete memory settings
Press any number 1-9 which stands for the saved preset.
Press RESET while press the related number which is saved for
the preset for deletion.
STD REV
PRESET
POSITION
RESET
meanwhile, press
any number to preset
the position
Press it
123
456
789
Attention
1
2
3
When camera wired into the power supply, it starts automatically from the memory presets.
If you want to keep the presets effective when start again after power break off, you can save the presets in
position .
Preset is saved or deleted in one position, it can not use other presets when setting. Same preset only can
be saved or deleted in one position.
Instruction

Menu Setting
SYSTEM SETTING
CAMERA SETTING
VIDEO OUT
COMM PARA
EXIT
MAIN MENU
SYSTEM SETTING
ZOOM LABEL OFF
HEAD DOWN OFF
L-R DIRACTION OFF
POS MODE VISCA
INITIAL INFO
DEFAULT
BACK
EXIT
INITIAL INFO
FIRMWAR V2.33 6300
PROTOCOL VISCA
DAURATE 9600
CAM ADDRESS AUTO
BACK
EXIT
6. System setting
1 Operate remote controller, press DATA SCREEN enter
OSD menu;
2 Press the arrow keys to select the menu, press left and
right button to set functions;
1 Operate remote controller, Press DATA SCREEN
enter OSD menu, press the arrow keys to move to
SYSTEM SETTING press right button to enter
next menu; as the left picture
ZOOM LABEL
HEAD DOWN Image inversion OFF Top mount
NO Top-down mount
L-R DIRACTION Remote controller arrow keys and
the camera running direction
OFF Remote controller arrow keys consistent with
the direction of camera run
NO Remote controller arrow keys with the camera
running direction of the opposite
POS MODE protocol mode, VISCA and FACTORY
for option
INITIAL INFO Dome initialization information
display; As the left picture shown: Initialization
information including software version number,
PTZ protocols, communication parameters, dome
address, etc.
DEFAULT to factory default setting
6.1 System setting
l
l
l
l
l
l
l
lRestore

Menu Setting
CAMERA SETTING
EXPOSURE
COLOR
FOCUS
PICTURE
BACK
EXIT
EXPOSURE
AE MODE SET
AGC LIMIT 28DB
BACK
EXIT
SLOW SHUTTER OFF
BLC OFF
EX-COMP -1.5DB
AE MODE
AE MODE AUTO
SHUTTER N/A
IRIS N/A
BRIGHT N/A
GAIN N/A
BACK
EXIT
SYSTEM SETTING
CAMERA SETTING
VIDEO OUT
COMM PARA
EXIT
MAIN MENU
7. CAMERA SETTING
Operate remote controller, Press DATA SCREEN enter
OSD menu, press the arrow keys to move to CAMERA
SETTING press right 1button to enter next menu;
as the left picture
1. Press arrow keys to move to EXPOSURE and then press
right button to enter next menu, as the left picture
2. Option iris priority mode IRIS , press right-hand
button,save setting.
3. Move the joystick to AE model sub-options IRIS F1.4
press right key, Select the appropriate aperture size,
press right button, save setting.
SHUTTER 1/50 It means shutter speed, when the AE
mode is shutter priority, this function can be set.
IRIS F1.6/0DB It means the size of iris, when the AE mode
is iris priority, this function can be set.
BRIGTH F1.6/0DB It means brightness, when the AE mode
is brightness priority, this function can be set.
AGC LIMIT Automatic Gain range of options 8-28dB
AGC LIMIT The smaller the value, the darker and image
of snowflakes point less; numerical bigger and bright , the image
of snowflakes point more
SLOW SHUTTER
OFF Close slow shutter
ON Open slow shutter
BLC Backlight compensation function
OFF Close backlight compensation
ON Open backlight compensation
EX-COMP Exposure compensation function
7.1 CAMERA EXPOSURE SETTING
setting, auto Iris mode
MANUAL setting
brightness priority mode
iris priority mode
shutter priority mode
Slow shutter control
AE MODE
1.Press right button ,for optional as Follows
AUTO : default
: manual
BRIGHT :
IRIS :
SHUTTER :

MAIN MENU
CAMERA SETTING
EXPOSURE
COLOR
FOCUS
PICTURE
BACK
EXIT
COLOR
WB MODE ATW
RGAIN 100
BGAIN 100
BACK
EXIT
FOCUS
FOCUS MODE AUTO
BACK
EXIT
SYSTEM SETTING
CAMERA SETTING
VIDEO OUT
COMM PARA
EXIT
7.2 CAMERA COLOR SETTING
7.3 CAMERA FOCUS SETTING
1.Operate remote controller, Press DATA SCREEN enter
OSD menu, press the arrow keys to move to CAMERA
SETTING press right button to enter next menu;
As the left picture:
2.Press arrow keys to move to COLOR and then press
right button to enter next menu, as the left picture
WB MODE White balance mode.
Auto mode of white balance AUTO is the default
mode of intelligent PTZ, environmental detection by
the camera's white balance sensor automatically restore
the true color. When select manual mode MANUAL
you can adjust the values of R GAIN and B GAIN
R GAIN Options range in 1-255, values larger,
represents an increase of more red, hue warm .
B GAIN Options range in 1-255, values larger,
represents an increase of more blue, hue turn cold .
Indoor mode INDOOR hue cool colors
Outdoor mode OUTDOOR hue warmer
ATW Auto tracking mode
OPW Single lock white balance mode
1.Operate remote controller, Press DATA SCREEN
enter OSD menu, press the arrow keys to move to
CAMERA SETTING press right button to enter
next menu; as the left picture
2.Press arrow keys to move to FOCUS and then press
right button to enter next menu, as the left picture
FOCUS MODE Focus ptional.
AUTO Auto Focus
MANUAL Manual Focus
Menu Setting

MAIN MENU
CAMERA SETTING
EXPOSURE
COLOR
FOCUS
PICTURE
BACK
EXIT
PICTURE
B&W AUTO
GAMMA NORMAL
HI-RESOLUTION OFF
NOISE REDUCE OFF
MIRROR OFF
SHARPNESS 000
BACK
EXIT
FLIP OFF
SYSTEM SETTING
CAMERA SETTING
VIDEO OUT
COMM PARA
EXIT
7.4 CAMERA PICTURE SETTING
1.Operate remote controller, press DATA SCREEN enter
OSD menu, press the arrow keys to move to CAMERA
SETTING press right button to enter next menu;
as the left picture
2.Press arrow keys to move to PICTURE and then press
right button to enter next menu, as the left picture
B&W
AUTO Auto color / black and white switch mode,
intelligent PTZ automatically switched according to
illumination
COLOR set as color mode
BLACK set as black and white mode
GAMMA Gamma correction
HI-RESOLUTION Camera built - in high-resolution
capabilities , refer to the camera types
MIRROR Mirror image function
FLIP The function of Auto flip when the camera
rotates pan 180 degrees
SHARPNESS
color / black and white switch mode
image acutance settings
NOISE REDUCE Noise reduce processing
4
Menu Setting

8. Video output and communication parameters setting
1.Operate remote controller, press DATA SCREEN enter
OSD menu, press the arrow keys to move to VIDEO OUT
press right button to enter next menu; As the left
picture
FORMAT Video output format including 1080P30
1080P25 1080I60 720P60 NTSC 720P50 PAL
CVBS 1080I50 etc for optional.
RGB /YUV Signal output format
HDCP High-bandwidth Digital Content Protection
OFF Closed off high-bandwidth Digital Content Protection
ON Open high-bandwidth Digital Content Protection
OPT CORR Optical correction
2.Operate remote controller, press DATA SCREEN enter OSD
menu, press the arrow keys to move to COMM PAPR press
right button to enter next menu; As the left picture.
PROTOCOL Dome Communation protocol, the optional of VI
PELCOD,PELCOPandsoon;
BAUDRATE Setting dome baud rate, optional:
2400bps 4800bps 9600bps 19200bps 38400bps.
ADDRESS Setting dome address, (range of address
001-255), when is AUTO, the system automatically
assigns the linkage dome address;
it
MAIN MENU
SYSTEM SETTING
CAMERA SETTING
VIDEO OUT
COMM PARA
EXIT
VIDO OUT
FORMAT 1080P30
RGB/YUV OFF
HDCP OFF
OPT CORR N/A
BACK
EXIT
COMM PAPR
PROTOCOL VISCA
BAUDRATE 2400
ADDRESS AUTO
BACK
EXIT
Menu Setting
5

Installation instruction
Installation instruction
2.
.
Use4M3x5crossscrewstofix
the video conference camera on the
connection board, showed as the
sketch
1.
.
To drill 4 M4 screw hole in ceiling
(see above sketch), use 4pc STP4X16
cross screws to fix the upside-down
installation board of D57 on ceiling
3.Hang the discreteness made in step
2 on the installation board, showed
as the above sketch.
4.Use 3pcs M3X5 cross screws to fix
the connection board and installation
board, like above sketch.

10. Maintenance service terms
1. Range of warranty
2. Warranty terms
3. Shipping
The product will be maintained free for one year.
The product will be obtained the free maintenance service if the same malfunction appears again within three
payable maintenance months.
Malfunction of products caused by force majeure (such as war, earthquake, lightning strike and so on ), abuse,
non-standard operation, change of construction, non-normal wear or accident are non-free of warranty.
Please prevent from the damage which is caused by heavy pressure , the fierce vibration and soaks in the
process of transportation and storage, which does not belong to the free maintenance range.
Please adopt the way of fission package or original package to transport because the product damage dose
not belong to the free maintenance scope if you use the whole packing way , not the original packing way.
The maintenance services will not be free when the pan/tilt module is disassembled or serviced by the user
voluntarily.
Our company implements the lifetime payable service if the product in malfunction has surpassed the
warranty period.
To the products with defect :if it's in the period of warranty, please fill in the form of warranty information
correctly, describe the trouble in details, and provide original sales. invoice or its copy.
For the damage and loss which was caused by the user's specifically application, factory won't bear any risk
and responsibility. The factory compensation made by breach of faith, negligence or tortious won't exceed the
amount of the products. The factory won't bear any responsibility for the special, unexpected and continue
damage caused by any other reasons.
Our company has the final right of explanation for the above terms.
If the products are within the warranty time, the buyer should fill in the warranty card and send back together
with the products.
If the product needs repaired , you can return it to the manufacturer through the supplier or directly. If you
choose the later , please contact us in order to speed up the process. And our company only undertake the
one-way freight from manufacturer to customer after maintenance.
Maintenance service terms