Dominator Smart Phone Control Kit User manual

SMART PHONE APP | For a free measure and quote call 0800 DOMINATOR (366 462) www.dominato r.co .nz
1. Have your garage door opener or device
operational & know your WiFi password.
2. Place Smart Hub within range of
your home WiFi router.
3. Connect Smart Hub to power.
4. Download the Dominator App.
(Scan one of the QR codes below.)
5. Click on “Get Started” & follow the steps.
BEFORE YOU START:
Scan QR code to
download the
Dominator App
for iOS devices.
dominator.co.nz/ios/ dominator.co.nz/android/
QUICK SETUP GUIDE
DOMINATOR SMART GARAGE ACCESS
SMART PHONE
CONTROL KIT
AND APP
The Smart Phone Control Kit works via your home’s WiFi network. Initial set up
involves linking your phone app, smart hub and device (e.g. garage door opener)
to your home network so that you can reliably operate your door from the app.
This user guide will show you the steps required to get you started.
DOWNLOAD THE APP:
Scan QR code to
download the
Dominator App
for android devices.

Click on “Get Started” Click on “Setup a new Smart Hub/Opener” Click on “Smart Hub”
SMART PHONE APP
SMART HUB SETUP GUIDE
Click on “Allow Access to Location” Click on “Next”
SMART PH O N E A P P | For a free measure and quote call 0800 DOMINATOR (366 462) www.dominato r.co .nz
Enable Hotspot – hold down the Hub
button for 5 seconds, release when the
LEDs flash, wait for the button to have
a solid purple light. Click on “Next”
Page 1

The hub will now connect to your
phone app - press join
The button on the hub will now flash
– press it to continue You are now connected
Complete your details Enter your WiFi network details
SMART PH O N E A P P | For a free measure and quote call 0800 DOMINATOR (366 462) www.dominato r.co .nz
Setup the details on your device
Click on “Next”
B&D SMART HUB PHONE APP
QUICK SETUP GUIDE P2
You are now connected
The hub will now connect to your phone
app - press join The button on the hub will now flash –
press it to continue
Setup the details on your device
Click on “Next” Complete your details Enter your wifi network details
“HUB” Wants to Join Wi-Fi
Network “DOM540004B3”?
Pacific / Auckland
SMART PHONE APP
SMART HUB SETUP GUIDE
Page 2

Select your WiFi network – this
needs to be a 2.4Ghz network
Enter your WiFi password and press ‘next’ The app will now connect to your WiFi
– this can take several minutes
Searching for updates to the WiFi
firmware, please wait Firmware now updated, click on “Next”
SMART PH O N E A P P | For a free measure and quote call 0800 DOMINATOR (366 462) www.dominato r.co .nz
Note: If your home has multiple WiFi
networks and your phone reconnects
to a different network to your hub
you may see the above message
SMART PHONE APP
SMART HUB SETUP GUIDE
Page 3

Now you will need to link your opener
or other device to the hub, click “+ set
up a new device”
Select Opener and press “Next” Ensure your device is powered on and
you have your registration code or QR
card, Press “Next”
Click Scan QR Code or enter your
registration code manually If using a QR code press “OK”
so that you can scan it
SMART PH O N E A P P | For a free measure and quote call 0800 DOMINATOR (366 462) www.dominato r.co .nz
Select the hub that you wish
to connect your opener to
(If you have multiple hubs)
Now you will need to link your opener
or other device to the hub, click “+ set
up a new device”
QUICK SETUP GUIDE P4
B&D SMART HUB PHONE APP
Select Opener and press “Next” Ensure your device is powered on and
you have your registration code or QR
card, Press “Next”
Select the hub that you wish to
connect your opener to (if you have
multiple hubs)
Click Scan QR Code or enter your
registration code manually If using QR code press “OK” so that you
can scan it
“Dominator” Would Like
to Access the Camera
“Garador” Would Like to
Access the Camera
SMART PHONE APP
SMART HUB SETUP GUIDE
Page 4

Scan your QR Code Wait for it to connect your hub to
your opener / device
You have now connected
– Press “Next”
Choose any notifications you want
from the app and press “Done” Set up complete – your smart opener is
now ready to use. Press “Okay” to view
your opener dashboard
SMART PH O N E A P P | For a free measure and quote call 0800 DOMINATOR (366 462) www.dominato r.co .nz
Give your opener / device a name
– i.e. Left Garage and press “Next”
QUICK SETUP GUIDE P4
Set up complete – your smart opener is
now ready to use. Press “Okay” to view
your opener dashboard
B&D SMART HUB PHONE APP
Scan your QR Code Wait for it to connect your hub to
your opener / device
You have now connected – Press
“Next”
Give your opener device a name –
i.e. Left Garage and press “Next”
Choose any notifications you want
from the app and press “Done”
SMART PHONE APP
SMART HUB SETUP GUIDE
Page 5