Donaldson X770734 User guide

SERVICING INSTRUCTIONS
AdBlue filter kit X770734
for Denoxtronic®2.0
1
3
5
6
2
4
5a
7
Unplug quick
connector from
module cover.
Unscrew drain
valve and
dispose of.
Unscrew & pull
to remove filter
element from
cover. Dispose
off used filter
element.
Remove gasket
from cover and
dispose off.
Open drain
valve and drain
module.
Unscrew cover
from module.
If left behind after
element removed
from step 5,
remove rubber
spacer “tyre”
from cover and
discard.
Insert new
gasket in cover.

Donaldson Europe b.v.b.a.
Interleuvenlaan 1
3001 Leuven
Belgium
[email protected]
www.donaldson.com
Europe [phone]
North America 800-374-1374
Mexico [phone]
Latin Am. & Carib. [phone]
Brazil [phone]
South Africa [phone]
South East Asia 65-6311-7373
Greater China 852-2405-8388
Japan 81-42-540-4112
Australia 61-02-4350-2033
India [phone]
© 2012 Donaldson Company, Inc.
Donaldson Company, Inc. reserves the right to change or discontinue
any model or specification at any time and without notice.
8
10
12
9
11
13
Position gasket.
Mount new filter
assembly onto
cover.
Install new drain
valve on cover.
New filter
element: make
sure component
1 is assembled
on component 2
as shown.
Screw cover on
module.
Plug quick
connector.