Door Guard Pty Ltd TS-LT-BLK-05 User manual

Door$Guard$Pty$Ltd$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$1
$
For$more$information$please$visit$:$www.doorguard.com.au$
For$Help$and$Support$please$send$an$email$to$:$[email protected]$
TS-LT-BLK-05 USER MANUAL

Door$Guard$Pty$Ltd$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$2
$
For$more$information$please$visit$:$www.doorguard.com.au$
For$Help$and$Support$please$send$an$email$to$:$[email protected]$
1. PRODUCT STRUCTURE
2. Introduction
Material
Zinc Alloy
Dimension
Handle Length
177.5(L)*70 (W)mm
99.8mm
Weight
2.7kg

Door$Guard$Pty$Ltd$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$3
$
For$more$information$please$visit$:$www.doorguard.com.au$
For$Help$and$Support$please$send$an$email$to$:$[email protected]$
3. Technical Specification
Communication mode
Bluetooth 4.0ble
Unlocking way
Bluetooth, Code, Mechanical key
Support System
Android 4.3 / IOS 7.0 above
Unlock time
≈ 1.5 sec
Power supply
4pcs 1.5V AA alkaline battery (not supplied)
Static current
≤18uA
Working current
≤200mA
Working temperature
0~80℃
Working humidity
15%~95%RH
Low batteries alarm
When you open the lock with low battery (lower than
4.8V), the indicator light will be flashed for 8 times. That
reminds you it’s time to change the batteries.
still can open the door 200 times.
Anti-Break in and security function
Input wrong password 5 times, the keypad will be locked
for 5 minutes.
3. FEATURES
（
PS: A mobile phone can be connected to more than a smart lock at the same time, when you need to manage a lock, you
should click on the app to enter the door lock device then proceed with the next operation )
Admin Bluetooth key:
Mobile phone and door lock connected via,the Bluetooth lock unlocks with Bluetooth via the app.
Admin Password:
Mobile phone and door lock connected,via the Bluetooth lock unlocks with a permanent Master code.
Bluetooth key remote authorization:
The Admin can instantly send Bluetooth keys to other people's mobile phone APP. It can limit the use time of
the Bluetooth key, and can immediately freeze, thaw and delete the electronic key.
Password remote authorization:
The door lock can send a permanent password and a limited time password in the absence of networking.
Password protection:
The smart lock will automatically locked for 5 minutes when the wrong password is entered 5 times；You can
enter any number of digits before the correct password, make sure the last few digits are the correct
password can be unlocked.
Automatically locked
：

Door$Guard$Pty$Ltd$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$4
$
For$more$information$please$visit$:$www.doorguard.com.au$
For$Help$and$Support$please$send$an$email$to$:$[email protected]$
Can be set to automatically locked between 5 to 120 seconds after unlocking.
General lock: Press and hold”#”about 5seconds.
Lower Battery Consumption: 4pcs AA batteries can provide 5000 openings (approx. 6 months)
Lower Battery Indicator: When battery power is low, the Bluetooth lock will emit low battery warning
sound. The battery level will also be updated on the app during Bluetooth unlock. If battery power runs out,
use a Mini USB Port
2.INSTALLATION GUIDANCE
Step 1: Drill holes on the door with the template.
Step 2: Install the lock latch.
Step 3: Install the front lock panel with the rubber gasket and fix them with screws.
Step 4: Install the back panel, fix with screws.
Step 5: Install 4pcs AA batteries, and put the battery cover on.
→
Real time monitoring: When users use app or password to unlock，the Admin can find unlock records on APP.
Real-time reminder: Mobile phone and door lock connected
，click “ “on the upper right corner of the interface
，
you can query the record of received Bluetooth key and more user information.

Door$Guard$Pty$Ltd$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$5
$
For$more$information$please$visit$:$www.doorguard.com.au$
For$Help$and$Support$please$send$an$email$to$:$[email protected]$
Template (for Drilling holes on the door)
2. INSTALLATION GUIDE
2-1. Installation condition
●Door thickness: 38-55mm

Door$Guard$Pty$Ltd$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$6
$
For$more$information$please$visit$:$www.doorguard.com.au$
For$Help$and$Support$please$send$an$email$to$:$[email protected]$
PROGRAMMING
4.1.Paring lock to the phone
1) Android mobile phone, please scan the QR code as below.
2) Apple mobile phone, please search “TTlock” from App Store.
2. Register a new account (phone number or email) or login with an existing account.
3. Turn on Bluetooth and network ， login APP ， click”+”---”look” （ .
operate the next step
Let the APP interface remain in this state and then

Door$Guard$Pty$Ltd$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$7
$
For$more$information$please$visit$:$www.doorguard.com.au$
For$Help$and$Support$please$send$an$email$to$:$[email protected]$
4. Remove 1pc of battery--touch keyboard a few seconds--put back the battery--press”#” immediately--you will
see” ”---press”+”---set name for the lock---press “ok”.
5. After mobile phone and door lock connected，click ” ” on the upper left corner of the interface then there
have more functional operations can be performed.
4-2. Unlock(The Admin unlock)
1. After mobile phone and door lock connected，turn on Bluetooth and network--click the connected door lock
device---" " to unlock. (The phone is within 0.5 meters from the door lock)
2. The Admin password unlock,after mobile phone and door lock connected, open the APP---click connected
door lock device--click “ ” on the upper right corner of the interface---see Admin passcode--input passcode
---"#"to unlock.
3. Mechanical key unlock, use a screwdriver to open the round keyhole cover on the front panel, then use
mechanical key unlock.
4. When you are in the room, use thumb-turn on back panel to unlock.
4-3. Lock
1. Press and hold"#"about 5seconds to lock.
2. Set auto lock, click the connected door lock device--click " " on the upper right corner of the interface---auto lock-
-choose set time 5s – 120s---OK.（ps：This operation must be near the door lock and need to be connected to
Bluetooth）
3. Mechanical key lock door, find the keyhole under the front panel, then use mechanical key lock the door.
4. When you are in the room, use thumb-turn on back panel to lock door4-4. Modify the Admin password
Click the connected door lock device---click " on the upper right corner of the interface---Admin pass
code--input the APP account login password---input the new Admin password（7-8digits）--- save.（ps
：
This
operation must be near the door lock and need to be connected to Bluetooth）
4-5.Modify the Admin
A door lock can only have one Admin at the same time，you need to delete the original Admin first if you want to
modify the Admin. find the door lock device that you want to modify the Admin---slide to the left---delete---click

Door$Guard$Pty$Ltd$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$8
$
For$more$information$please$visit$:$www.doorguard.com.au$
For$Help$and$Support$please$send$an$email$to$:$[email protected]$
it---input the APP account login password--- ok.（ps
：
This operation must be near the door lock and need to be
connected to Bluetooth）
4-6. Bluetooth key remote authorization(Admin’ s phone can remotely send digital keys to other users to unlock)
Click the connected door lock device---”eKey” on the bottom of the
interface---choose“Permanent”or”Timed”---input the receiver’s APP account（the receiver must be download the
APP and register an account）--- “send” .（remark:This operation need to be connected to Bluetooth and network,
if renters want to send digital keys to other users, they need secondary authorization from Admin）
4-7. The Admin’ s phone has the right to freeze, delete, authorize, and rename for the digital key that
has been sent
Click the connected door lock device---”User” on the bottom of the ” on the upper right
corner of the interface---choose”Clear ekeys” or ”Reset ekeys”or”ekey”according to your needs. If you only need
to manage some of the keys, Click the digital key that you want to manage, according to your needs to
choose”Freeze”or”Delete”or”Authorize”or”Rename”; also you can click ” ”on the upper right corner of the
interface to change the validity of the electronic key that has been sent.（ps
：
This operation need to be connected
to Bluetooth and network)
4-8. Password remote authorization
（
Admin’ s phone can remotely send password to other users to unlock
）
Click the connected door lock device---”Passcode” on the bottom of the interface--- choose”Permanent”or
“Timed” or “Cyclic” or “One-time” according to your needs---edit the active time---”Generate”---”Send by Wechat”
or “Send by Msg.’ （ps
：
This operation need to be connected to network）
Permanent password: The password will be valid in long-term with unlimited times to open the door. (PS:User
need to open the door with already set password within 24 hours, otherwise, it will be invalid.)
Timed password: User can open the door randomly with set password in a limited time. Like a week, an hour, a
day, 30 minutes...etc.(PS:User need to open the door with already set password within 24 hours, otherwise, it will
be invalid.)
Cyclic password: set specific time on each week period. For example, you can set up a period 10:00-11:00am
on every Saturday for housekeeper to enter your house, then they can only open the door during 10:00-11:00am
on Saturday. Any other time, the password is invalid.
One-Time password: User can only used the password to unlock the door for one time, the password will be
effective within 6 hours after set-up

Door$Guard$Pty$Ltd$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$9
$
For$more$information$please$visit$:$www.doorguard.com.au$
For$Help$and$Support$please$send$an$email$to$:$[email protected]$
Check our Installation Videos at :
http://www.doorguard.com.au/videos
or send us an email to :
[email protected]