Dorel Asia Baby Relax DA6564-1 User manual

DA6564-1 (WHITE & GREY)
3-DRAWER DRESSER
0-65857-16804-4
UPC CODE:
TWO TONE FINISH
KEEP FOR FUTURE REFERENCE.
Date of purchase:
CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND
NOTE:
Lot number:
DOREL ASIA
Model No:
_______ / _______ / _______
THIS INSTRUCTION BOOKLET
_____________________________________
(TAKEN FROM CARTON)
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: [phone]
E-Mail: [email protected]
Fax #: [phone]
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]

*Ensure all parts and components are present before beginning assembly.
*Assemble on a soft, smooth surface to prevent damage to the product finish.
*A Phillips head screw driver is not included.
*
DO NOT use power tools.
*
* Assembly will require two people.
*
Dorel Asia warrants its product to be free from defects in material and workmanship and
agrees to remedy any such defect. This warranty covers 1 year from the date of original
purchase. This warranty is valid only upon presentation of proof of purchase. This is
solely limited to the repair or replacement of defective furniture components and no
assembly labor is included. This warranty does not apply to any product which has
been improperly assembled, subjected to misuse or abuse or which has been altered or
repaired in any way. This warranty gives you specific legal rights and you may also
have other rights which vary from State to State.
Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be
used occasionally to clean surface. Dry immediately. Do not use any abrasives that
may damage finish. Excessive exposure to sunlight and extreme changes in
temperature and moisture can damage wood furniture.
WARNING: Should this product become damaged,
and/or components are broken or missing, DO NOT USE.
CUSTOMER SERVICE
NOTES:
CARE AND CLEANING
Montreal, Quebec
12345 Albert-Hudon Boulevard, Suite 100
Do not use the unit if it is damaged or broken.
CALL 1-800-295-1980
If you have any questions about this product, contact our customer service
representative first!
Check bolts/screws periodically and tighten them if necessary.
LIMITED WARRANTY
Estimated assembly time: 60 minutes.
MAINTENANCE
E-MAIL: [email protected]
Canada H1G 3L1
You can also order parts by writing to the address listed below. Please include the
product model number, color and a detailed description of the part.
Customer Service Department No. 413

HARDWARE LIST
1 2 3
4 5 6
7 8 9
10 11 12
3-DRAWER DRESSER
DA6564-1
Ø7 * 28 mm
SMALL CAM BOLT
15 PCS
Ø6 * 20 mm
ALLEN KEY
1 PC
Ø8 * 30 mm
LARGE WOOD DOWEL
26 PCS
Ø12 * 1.5 mm
LOCK WASHER
6 PCS
Ø13 * 10 mm
Ø4 * 25 mm
Ø15 * 12 mm
Ø7 * 36 mm
Ø1/4" * 32 mm
Ø16 * 1 mm
BOLT
6 PCS
LARGE CAM BOLT
12 PCS
LARGE CAM LOCK
12 PCS
ROUND HEAD SCREW
20 PCS
SMALL WOOD DOWEL
9 PCS
FLAT WASHER
6 PCS
Ø3 * 15 mm
SMALL CAM LOCK
15 PCS
FLAT HEAD SCREW
15 PCS

PARTS LIST
A B C
D E F
G H I
DA6564-1
3-DRAWER DRESSER
FRONT TOP RAIL
1 PC
FRONT MIDDLE RAIL
(REVERSIBLE RAIL)
2 PCS
FRONT MIDDLE RAIL
(REVERSIBLE RAIL)
1 PC
LEFT SIDE FRAME
(WITH A REVERSIBLE PANEL)
1 PC
RIGHT SIDE FRAME
(WITH A REVERSIBLE PANEL)
1 PC
TOP PANEL
1 PC
BACK BOTTOM RAIL
1 PC
FRONT BOTTOM RAIL
1 PC
BACK TOP RAIL
1 PC

PARTS LIST
J K L
M N O
P Q
BOTTOM DRAWER FRONT
PANEL -1 PC
BACK PANEL
1 PC
DRAWER SUPPORT RAIL
3 PCS
DRAWER BACK PANEL
3 PCS
DA6564-1
3-DRAWER DRESSER
RIGHT DRAWER SIDE
PANEL- 3 PCS
LEFT DRAWER SIDE
PANEL - 3 PCS
DRAWER BOTTOM PANEL
3 PCS
TOP DRAWER FRONT
PANEL -2 PCS

3-DRAWER DRESSER
DA6564-1
NOTE: Side Frames (B & C) and front middle rails (E & F) are
reversible and can be attached so that they are either grey or
white. Choose your preferred look before beginning
assembly.
All white dresser
Dresser with grey side panels
Dresser with grey front rails
Dresser with grey front rails
and grey side panels

STEP 1
3-DRAWER DRESSER
DA6564-1
NOTE: Front middle rails (E & F) are reversible and can be attached so that they are
either grey or white. Before securing the front middle rails, make sure they are attached
so that your preferred color will be visible.
Insert large wood dowels (3) and large cam bolts (2) into left side frame (B).
Insert large cam locks (1) into front top rail (D) and front middle rail (F).
Attach front rails (D, E, & F) to left side frame (B). Secure the rails by rotating large cam
lock (1) 1/2 clockwise using a Phillips head screwdriver (not included).
Preferred color on this side
Preferred color on this side
Preferred color on this side

STEP 2
3-DRAWER DRESSER
DA6564-1
Insert large wood dowels (3) into left side frame (B).
Attach front bottom rail (G) to left side frame (B) using bolt (4), flat washer (5) and spring
washer (6).
Use an Allen Key (12) to tighten bolt (4).

STEP 3
3-DRAWER DRESSER
DA6564-1
Insert large cam bolts (2) and large wood dowels (3) into left side frame (B).
Insert large cam locks (1) into back top rail (H) and back bottom rail (I).
Attach back top rail (H) and back bottom rail (I) to left side frame (B). Secure the rails by
rotating large cam lock (1) 1/2 clockwise using a Phillips head screwdriver (not included).

STEP 4
3-DRAWER DRESSER
DA6564-1
Insert large wood dowels (3) and large cam locks (1) into rails (D, E, F, G, H & I) as shown
below.
Insert large cam bolts (2) into right side frame (C).
Attach right side frame (C) to the assembled unit and secure it by rotating large cam locks
(1) 1/2 turn clockwise with a Phillips head screwdriver (not included).
Secure front bottom rail (G) to right side panel (C) with bolt (4), flat washer (5) and spring
washer (6) using Allen Key (12).

STEP 5
3-DRAWER DRESSER
DA6564-1
NOTE: left side frame (B) and right side frame (C) have reversible panels that are white
on one side and grey on the other. Before moving on to the next step, make sure the
panels are inserted so that your preferred color will be visible once assembly is complete.
Slide the panels out from the top of side frames (B & C) and re-insert them so that your
preferred color is facing outwards.

STEP 6
3-DRAWER DRESSER
DA6564-1
Insert large cam locks (1) into side rails (D & H) and large wood dowels (3) into side
frames (B & C) as shown.
Insert large cam bolts (2) into top panel (A).
Attach top panel (A) to the assembled unit. Secure top panel (A) by rotating large cam
locks (1) 1/2 turn clockwise using a Phillips head screwdriver (not included).
Further secure top panel (A) to the unit using bolts (4), flat washers (5) and spring
washers (6) through the corners of side frames (B & C) as shown. Use Allen Key (12) to
secure bolts (4).

STEP 7
3-DRAWER DRESSER
DA6564-1
Attach back panel (J) to the unit using round head screws (7) and a Phillips head
screwdriver (not included).

STEP 8
3-DRAWER DRESSER
DA6564-1
Insert small wood dowels (8) and small cam bolts (9) into top drawer front panels (K) and
bottom drawer front panel (L).
Insert small cam locks (10) into right drawer side panels (M) and left drawer side panels
(N).
Attach drawer sides (M & N) to drawer front panels (K & L). Secure the drawer sides by
rotating small cam locks (10) 1/2 turn clockwise using a Phillips head screwdriver (not
included).
6 PCS
12 PCS
12 PCS

STEP 9
3-DRAWER DRESSER
DA6564-1
Slide drawer bottom panels (O) into the grooves of drawer side panels (M & N).
Insert small cam locks (10) into drawer support rails (P).
Insert small cam bolts (9) and small wood dowels (8) into top drawer front panels (K) and
bottom drawer front panel (L).
Attach drawer support rails (P) to drawer front panels (K & L). Secure drawer support
panels (P) by rotating small cam locks (10) 1/2 turn clockwise using a Phillips head
screwdriver (not included).
L
3 PCS
3 PCS
3 PCS

STEP 10
3-DRAWER DRESSER
DA6564-1
Attach drawer back panels (Q) to drawer bodies using flat head screws (11) with a
Phillips head screwdriver (not included).
L
15 PCS

STEP 11
3-DRAWER DRESSER
DA6564-1
Insert all drawers into the dresser.

Furniture Wall Safety Strap
1 2 3 4 5
TOOLS NECESSARY: RUBBER MALLET AND PHILLIPS SCREW DRIVER ARE NOT INCLUDED.
NOTE: 3/8" DRILL BIT AND ELECTRIC DRILL ARE NOT PROVIDED.
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE
USING THIS PRODUCT AND KEEP THESE INSTRUCTIONS FOR
FUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS, PLEASE
CALL OUR CUSTOMER SERVICE NUMBER: 1-800-295-1980.
Step 7:
Drill two 3/8" holes into the wall. Press the wall anchors (2) into the holes and gently tap until the flange on the
anchors is against the wall surface.
Position the brackets (3) over the anchors (2) and use the long screws (5) to securely attach the brackets (3)
to the wall.
Step 1:
Step 2:
Attach two mounting brackets (3) securely to the back edge of the furniture. Use the short screws (4).
Step 8:
Step 3:
Step 4:
Determine where furniture is to be placed and mark location on the wall for the mounting brackets (3), screw
holes approximately 2" below the brackets mounted to the edge of the furniture.
Step 5:
Step 6:
Place the furniture so the brackets (3) on the back edge is in line with the brackets (3) on the wall.
Lace an end of the safety wall straps (1) down through each bracket (3). Bring both ends together and slide
the beaded end of the straps (1) through the keyholes shaped slot in the other end until snug. Pull down on the
beaded end until it snap locks into the keyhole slot.
To double lock return the beaded end back through the keyholes as shown.
Check to make sure the straps (1) are securely laced and locked to the brackets (3).
SAFETY WALL STRAP
2 PCS
WARNING: WHEN UPRIGHT, IT IS POSSIBLE THAT THE
FURNITURE MAY TIP OVER. PLEASE INSTALL THE
SAFETY WALL STRAP BEHIND THE FURNITURE TO
ENSURE SAFETY.
LONG SCREW
2 PCS
SHORT SCREW
2 PCS
MOUNTING BRACKET
4 PCS
WALL ANCHOR
2 PCS
AB
Email:[email protected]m
AB

3-DRAWER DRESSER
DA6564-1
CAUTION: This unit is intended for use only with the
products and/or maximum weights indicated. Use with other
products and/or products heavier than the maximum weights
indicated may result in instability or cause possible injury.
MAXIMUM WEIGHT
FOR TOP IS 25 LBS
MAXIMUM WEIGHT
FOR ALL DRAWERS
- 10 LBS
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: [phone]
E-Mail: [email protected]
Fax #: [phone]
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]

MODEL #: DA6564-1
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE
PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING
NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S).
Customer Service Fax Number 514-353-7819
Request Date:
Name:
Shipping Address:
Street & Number:
City & State:
Zip Code:
Day Time Phone Number:
(including area code)
Date & Place of Purchase:
Part(s) description and quantity (Please be sure to list model number or SKN number):
Email: [email protected]
Customer Service
Customer Service Representative Mailing Address:
Customer Service Department No. 413, 12345 Albert-Hudon Boulevard, Suite 100, Montreal, QC, Canada, H1G 3L1
Customer Service Phone Number 1-800-295-1980