Dorel Asia DA6504-1 User manual

Model No:
DRESSER
UPC CODE:
Lot number:
(TAKEN FROM CARTON)
_____________________________________
DOREL ASIA
DA6504-1
0-65857-16509-8
Date of purchase:
_______ / _______ / _______
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: [phone]
E-Mail: [email protected]
Fax #: [phone]
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]

*
*
* Use the wall safety strap provided to secure the unit to the wall.
* A Phillips head screwdriver is not included.
*
*
*
*
*
Montreal, Quebec
Canada H1G 3L1
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact our customer service
representative first!
CALL 1-800-295-1980
You can also order parts by writing to the address listed below. Please include the product
model number, color and a detailed description of the part.
Customer Service Department No. 413
12345 Albert-Hudon Boulevard, Suite 100
DO NOT use power tools.
CAUTION: Adult assembly required.
Assembly will require two people.
To avoid unnecessary damage, when levelers have been extended, DO NOT drag across
surface when moving. Be sure to lift and carry the item to its location.
E-MAIL: [email protected]
NOTES
Ensure all parts and components are present before beginning assembly.
Assemble on a soft, smooth surface to prevent damage to the product finish.
Check bolts/screws periodically and tighten them if necessary.
LIMITED WARRANTY
Dorel Asia warrants its product to be free from defects in material and workmanship and agrees
to remedy any such defect. This warranty covers 1 year from the date of original purchase.
This warranty is valid only upon presentation of proof of purchase. This is solely limited to the
repair or replacement of defective furniture components and no assembly labor is included.
This warranty does not apply to any product which has been improperly assembled, subjected to
misuse or abuse or which has been altered or repaired in any way. This warranty gives you
specific legal rights and you may also have other rights which vary from State to State.
WARNING: Should this product become damaged, and/or
components are broken or missing, DO NOT USE.
Estimated assembly time: 60 minutes.
CARE AND CLEANING
Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be used
occasionally to clean surface. Dry immediately. Do not use any abrasives that may damage
finish. Excessive exposure to sunlight and extreme changes in temperature and moisture can
damage wood furniture.
MAINTENANCE

HARDWARE LIST
1 2 3 4
5 6 7 8
910 11 12
Ø5/8" x 1-1/4"
Ø4mm x 1"
28 PCS
28 PCS
Ø3 X 15mm
SMALL WOOD DOWEL
22 PCS
1 PC
ROUND HEAD SCREW
FLAT HEAD SCREW
BOLT
ALLEN KEY
36 PCS
28 PCS
6 PCS
DRESSER
DA6504-1
Ø8 X 30mm
Ø6 X 20mm
Ø7 X 35mm
HANDLE
SHORT BOLT
7 PCS
LARGE CAM BOLT
37 PCS
Ø5/32" x 1/2"
LARGE CAM LOCK
37 PCS
14 PCS
LARGE WOOD DOWEL
42 PCS
Ø5 X 28mm
SMALL CAM LOCK
SMALL CAM BOLT

PARTS LIST
A B C D E
F G H I J
K L M N O
P Q R S T
U V W
BACK TOP RAIL
FRONT MIDDLE RAIL
LARGE LEFT DRAWER SIDE
4 PCS
BACK PANEL
LARGE FRONT DRAWER PANEL
FRONT LOWER RAIL
1 PC
1 PC
DRESSER
DA6504-1
UPPER STAND PANEL
2 PCS
RIGHT SIDE PANEL
FIXED SHELF
1 PC
TOP PANEL
LEFT SIDE PANEL
1 PC
3 PCS
4 PCS
SMALL FRONT DRAWER PANEL
SMALL LEFT DRAWER SIDE
3 PCS
3 PCS
SMALL RIGHT DRAWER SIDE
SMALL DRAWER BACK
SMALL DRAWER BOTTOM
2 PCS
4 PCS
2 PCS
LARGE DRAWER BOTTOM
1 PC
1 PC
LOWER STAND PANEL
FRONT TOP RAIL
3 PCS
3 PCS
4 PCS
4 PCS
LARGE RIGHT DRAWER SIDE
1 PC
1 PC
2 PCS
SUPPORT PANEL
BACK LOWER RAIL
1 PC
LARGE DRAWER BACK

STEP 1:
1 4 PCS
4 2 PCS
11 4 PCS
Insert large wood dowels (1) and large cam bolts (4) into fixed shelf (D).
Attach upper stand panels (E) to fixed shelf (D) with bolts (11).
Use Allen key (12) to tighten bolts (11).
DRESSER
DA6504-1

STEP 2:
3 3 PCS
4 3 PCS
DRESSER
DA6504-1
Insert large cam bolts (4) into back lower rails (K) and front lower rail (J).
Insert large cam locks (3) into lower stand panel (F).
Attach the rails (K & L) to lower stand panel (F) as shown below and secure by rotating large
cam locks (3) 1/2-turn clockwise using a Phillips head screwdriver (not included).

STEP 3:
1 2 PCS
3 2 PCS
4 2 PCS
DRESSER
DA6504-1
Insert large wood dowels (1) and large cam locks (3) into front middle rails (I).
Insert large cam bolts (4) into lower stand panel (F) as shown.
Secure the front middle rails (I) to lower stand panel (F) by rotating large cam locks (3) 1/2-turn
clockwise using a Phillips head screwdriver (not included).

STEP 4:
1 2 PCS
3 2 PCS
DRESSER
DA6504-1
Insert large wood dowels (1) into fixed shelf (D).
Insert large cam locks (3) into lower stand panel (F).
Attach fixed shelf (D) to lower stand panel (F) and secure by rotating large cam locks (3) 1/2-
turn clockwise using a Phillips head screwdriver (not included).

STEP 5:
4
16 PCS
DRESSER
DA6504-1
Insert large cam bolts (4) into left side panel (B) and right side panel (C).

STEP 6:
1 9 PCS
3 6 PCS
DRESSER
DA6504-1
Insert large wood dowels (1) into left side panel (B).
Insert large cam locks (3) into rails (I, J, K) and fixed shelf (D) as shown.
Attach the assembled frame as shown to left side panel (B) by rotating large cam locks (3) 1/2-
turn clockwise using a Phillips head screwdriver (not included).

STEP 7:
1 4 PCS
3 2 PCS
DRESSER
DA6504-1
Insert large wood dowels (1) into left side panel (B).
Insert large cam locks (3) into back top rail (H) and front top rail (G).
Attach back top rail (H) and front top rail (G) to left side panel (B) by rotating large cam locks (3)
1/2-turn clockwise using a Phillips head screwdriver (not included).

STEP 8:
1 13 PCS
3 8 PCS
DRESSER
DA6504-1
Insert large wood dowels (1) and large cam locks (3) into rails (G, H, I, J & K) and fixed shelf (D).
Secure the right side panel (C) to the assembled unit by rotating large cam locks (3) 1/2-turn
clockwise using a Phillips head screwdriver (not included).

STEP 9:
1 8 PCS 4 14 PCS
3 14 PCS 11 2 PCS
DRESSER
DA6504-1
Insert large cam bolts (4) into top panel (A) as shown.
Insert large wood dowels (1) into left side panel (B), upper stand panels (E) and right side panel
(C).
Insert large cam locks (3) into side panels (B & C), upper stand panels (E), back top rail (H) and
front top rail (G).
Fasten top panel (A) to the assembled unit by rotating large cam locks (3) 1/2-turn clockwise using
a Phillips head screwdriver (not included).
Attach support panel (L) to lower stand panel (F) with bolts (11). Use Allen key (12) to tighten the
bolts.

STEP 10:
9 36 PCS
DRESSER
DA6504-1
Attach back panels (M) to the assembled unit with round head screws (9).
Use a Phillips head screwdriver (not included) to tighten the screws.

STEP 11:
10 4 PCS 2 4 PCS
8 2 PCS 5 4 PCS
6 4 PCS
DRESSER
DA6504-1
Insert small cam bolts (6) and small wood dowels (2) into large front drawer panel (N).
Insert small cam locks (5) into large left drawer side (O) and large right drawer side (P).
Attach large drawer sides (O & P) to large front drawer panel (N).
Secure the drawer sides by rotating small cam locks (5) 1/2-turn clockwise.
Slide the large drawer bottom (R) into the grooves of large drawer sides (O & P) and large front drawer panel (N).
Attach large drawer back (Q) to large drawer sides (O & P) with flat head screws (10).
Use a Phillips head screwdriver (not included) to tighten screws.
Attach handle (7) to small front drawer panel (S) with short bolts (8) and a Phillips head screwdriver (not included).
Repeat this step to assemble the other large drawers.
1 PC
7

STEP 12:
10 4 PCS 2 4 PCS
8 2 PCS 5 4 PCS
6 4 PCS
DRESSER
DA6504-1
Insert small cam bolts (6) and small wood dowels (2) into small front drawer panel (S).
Insert small cam locks (5) into small left drawer side (T) and small right drawer side (U).
Attach small drawer sides (T & U) to small front drawer panel (S) and secure by rotating small cam locks (5) 1/2-turn
clockwise.
Slide the small drawer bottom (W) into the grooves of small drawer sides (T & U) and small front drawer panel (S).
Attach small drawer back (V) to small drawer sides (T & U) with flat head screws (10) and a Phillips head screwdriver (not
included).
Attach handle (7) to small front drawer panel (S) with short bolts (8) and a Phillips head screwdriver (not included).
Repeat this step to assemble the other small drawers.
7
1 PC

STEP 13:
DRESSER
DA6504-1
Insert all drawers into the assembled unit.

DRESSER
That's it! You've finished assembling your Dresser!
CAUTION: "This unit is intended for use only with the products
and/or maximum weights indicated. Use with other products and/or
products heavier than the maximum weights indicated may result in
instability or cause possible injury."
DRESSER
DA6504-1
The maximum
weight is
30lbs
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer
service department. We will replace the part FREE of
charge.
Tel #: [phone]
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]
Maximum
weight per
drawer 15lbs

Furniture Wall Safety Strap
1 2 3 4 5
TOOLS NECESSARY: RUBBER MALLET AND PHILLIPS SCREW DRIVER ARE NOT INCLUDED.
NOTE: 3/8" DRILL BIT AND ELECTRIC DRILL ARE NOT PROVIDED.
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE
USING THIS PRODUCT AND KEEP THESE INSTRUCTIONS FOR
FUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS, PLEASE
CALL OUR CUSTOMER SERVICE NUMBER: [phone].
TO MOVE THE FURNITURE AFTER THE SAFETY WALL STRAP HAS BEEN INSTALLED, SIMPLY REMOVE THE
LONG SCREW (5) FROM THE WALL TO LOOSEN THE SAFETY WALL STRAP.
Check to make sure the straps (1) is securely laced and locked to the brackets (3).
Drill two 3/8" holes in the wall. Press the wall anchors (2) into the holes and gently tap until the flange
on the anchors is against the wall surface.
Position the brackets (3) over the anchors (2) and use the long screws (5) to securely, attach the
brackets (3) to the wall.
Place the furniture so the brackets (3) on the back edge is in line with the brackets (3) on the wall.
Lace an end of the safety wall straps (1) down through each bracket (3). Bring both ends together and
slide the beaded end of the straps (1) through the keyholes shaped slot in the other end until snug. Pull
down on the beaded end until it snap locks into the keyhole slot.
To double lock return the beaded end back through the keyholes as shown.
Step 8:
Step 3:
Step 4:
SAFETY WALL STRAP
2 PCS
WALL ANCHOR
2 PCS
MOUNTING BRACKET
4 PCS
SHORT SCREW
2 PCS
LONG SCREW
2 PCS
WARNING: WHEN UPRIGHT, IT IS POSSIBLE THAT THE FURNITURE
MAY TIP OVER. PLEASE INSTALL THE SAFETY WALL STRAP BEHIND
THE FURNITURE TO ENSURE SAFETY.
Step 7:
Step 1:
Step 2:
Attach two mounting brackets (3) securely to the back edge of the furniture. Use the short screws (4).
Determine where furniture is to be placed and mark location on the wall for the mounting brackets (3),
screw holes approximately 2" below the brackets mounted to the edge of the furniture.
Step 5:
Step 6:

MODEL #: DA6504-1
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE
PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING
NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S).
Customer Service Fax Number 514-353-7819
Request Date:
Name:
Shipping Address:
Street & Number:
City & State:
Zip Code:
Day Time Phone Number:
(including area code)
Date & Place of Purchase:
Part(s) description and quantity (Please be sure to list model number or SKN number):
Customer Service
Customer Service Representative Mailing Address:
Customer Service Department No. 413, 12345 Albert-Hudon Boulevard, Suite 100, Montreal, QC, Canada, H1G 3L1
Email: [e-mail]
Customer Service Phone Number 1-800-295-1980