Dorel Asia DL5278QB-B User manual

QUEEN METAL BED
(TAKEN FROM CARTON)
CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND
KEEP FOR FUTURE REFERENCE.
_______ / _______ / _______
Lot number:
Date of purchase:
Model No:
DOREL ASIA
UPC CODE:
0-65857-17809-8
NOTE:
THIS INSTRUCTION BOOKLET
DL5278QB-B
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: [phone]
E-Mail: [e-mail]
Fax #: [phone]
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]

* Ensure all parts and components are present before beginning assembly.
WARNING: Should this product become damaged, and/or
components are broken or missing, DO NOT USE.
MAINTENANCE
* Read all instructions completely before assembly.
* DO NOT use power tools.
* CAUTION: Adult assembly required.
CARE AND CLEANING
Dust this item regularly with a soft, lint-free cloth to prevent soil build up. Do not soak or wash in hot
water. Wipe with a soft, damp cloth if necessary. Do not use abrasives, cleansers or polish.
LIMITED WARRANTY
Dorel Asia warrants its product to be free from defects in material and workmanship and agrees to
remedy any such defect. This warranty covers 1 year from the date of original purchase. This warranty is
valid only upon presentation of proof of purchase. This is solely limited to the repair or replacement of
defective furniture components and no assembly labor is included. This warranty does not apply to any
product which has been improperly assembled, subjected to misuse or abuse or which has been altered
or repaired in any way. This warranty gives you specific legal rights and you may also have other rights
which vary from State to State.
Check bolts/screws periodically and tighten them if necessary.
NOTES:
* Assembly and handling may require two people.
* Estimated assembly time is 45 - 60 minutes.
* Assemble on a soft, smooth surface to prevent damage to product finish.
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact our customer service
representative first!
You can also order parts by writing to the address listed below. Please include the product model
number, color and a detailed description of the part.
E-MAIL: [email protected]
Customer Service Department No. 413
12345 Albert-Hudon Boulevard, Suite 100
Montreal, Quebec
Canada H1G 3L1
CALL 1-800-295-1980

1 2 3
0-65857-17809-8
4 5 6
710
BOLT
Ø1/4" X 19/32"
Ø1/4" X 1-9/16"
Ø1/4" X 1-3/4"
BOLT
QUEEN METAL BED
DL5278QB-B
Ø1/4" X 1-15/16"
Ø1/2" X 1/16"
Ø10 mm X 2 mm
ALLEN WRENCH
12 PCS
BOLT
THREADED PIN
10 mm X 6 mm
ALLEN KEY
1 PC
NUT
14 PCS
FLAT WASHER
SPRING WASHER
14 PCS
6 PCS
6 PCS
Ø10 mm X 35 mm
4 PCS
HARDWARE LIST
6 PCS
BOLT
8 PCS
1 PC

A B C
0-65857-17809-8
D E F
G H I
J K L
FINIAL
4 PCS
(WITH 1 BRACKET)
(WITH 2 BRACKETS)
(WITH 1 BRACKET)
(WITH 2 BRACKETS)
(WITH 2 HOLES)
1 PC
1 PC
1 PC
RIGHT SIDE RAIL
SLAT
QUEEN METAL BED
DL5278QB-B
PARTS LIST
HEADBOARD
HEADBOARD POST
BOTTOM CROSS BAR
1 PC
LEFT SIDE RAIL
LEFT SIDE RAIL
RIGHT SIDE RAIL
1 PC
2 PCS
1 PC
2 PCS
1 PC
MIDDLE SLAT
(WITH 2 HOLES)
1 PC
2 PCS
FOOTBOARD
FOOTBOARD POST
SUPPORT LEG
6 PCS
M

DL5278QB-B
0-65857-17809-8
STEP 1
Attach the headboard (A) and bottom cross bar (C) to the headboard posts (B) with bolts (4). Use
Allen Key (10) to tighten the bolts.
NOTE: Do not fully tighten the bolts. Leaving the bolts loose will facilitate assembly in the
following steps.
QUEEN METAL BED
DL5278QB-B
4

DL5278QB-B
0-65857-17809-8
QUEEN METAL BED
DL5278QB-B
STEP 2
Attach the footboard posts (K) to the footboard (J) with bolts (4). Use Allen Key (10) to tighten the
bolts.
NOTE: Do not fully tighten the bolts. Leaving the bolts loose will facilitate assembly in the
following steps.
4

STEP 3 DL5278QB-B
0-65857-17809-8
Attach the left side rails (D & E) with bolts (1), flat washers (5) and spring washers (6).
Use Allen Key (10) to tighten the bolts.
QUEEN METAL BED
DL5278QB-B
1
5
6

STEP 4 DL5278QB-B
0-65857-17809-8
QUEEN METAL BED
DL5278QB-B
Attach the right side rails (F & G) with the bolts (1), flat washers (5) and spring washers (6).
Use Allen Key (10) to tighten the bolts.
1
5
6

STEP 5 DL5278QB-B
0-65857-17809-8
Attach the assembled left and right side rails to the headboard and footboard with bolts (3) and nuts
(7). Use Allen Key (10) and Allen wrench (9) to tighten the bolts and nuts.
NOTE: Do not fully tighten the bolts. Leaving the bolts loose will facilitate assembly in the following
steps.
QUEEN METAL BED
DL5278QB-B
7
3

STEP 6 DL5278QB-B
0-65857-17809-8
Attach the support legs (L) to slats (H & I) with bolts (2). Use Allen Key (10) to tighten the bolts.
NOTE: Do not fully the tighten bolts. Leaving the bolts loose will facilitate assembly in the
following steps.
QUEEN METAL BED
DL5278QB-B
2