Dorel Asia DA7618 User manual

Model No:
UPC CODE:
NOTE:
Lot number:
(TAKEN FROM CARTON)
_____________________________________
KEEP FOR FUTURE REFERENCE.
Date of purchase:
_______ / _______ / _______
0-65857-17454-0
CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND
THIS INSTRUCTION BOOKLET
0-65857-17453-3
0-65857-17418-2
MULTIFUNCTION CART
DA7618B (BLACK)
DA7618G (GRAY)
DOREL ASIA
DA7618 (WHITE)
DA7618-DC (WHITE)
0-65857-17425-0
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: [phone]
E-Mail: [e-mail]
Fax #: [phone]
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]

* Ensure that all parts and components are located before beginning assembly.
* Assemble on a soft surface to prevent damage to the product finish.
* DO NOT use the unit if it is damaged or broken.
* DO NOT use power tools.
* Caution: Adult assembly required.
* Assembly will require 2 people.
* Estimated assembly time: 30 minutes.
* Phillips head screwdriver (not provided) is required for assembly.
* DO NOT use the cart as a seating surface.
* DO NOT place any type of electrical appliance on the unit.
* DO NOT place any pots or pans containing hot liquids on the unit.
* DO NOT place any item on the top panel weighing more than 30 lbs.
Montreal, Quebec
Canada H1G 3L1
E-MAIL: [email protected]
Customer Service Department No. 413
12345 Albert-Hudon Boulevard, Suite 100
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact our customer service representative first!
CALL 1-800-295-1980
You can also order parts by writing to the address listed below. Please include the product model number, color and a detailed
description of the part.
* After placing the cart in the desired location, lock the caster wheels to prevent movement.
CARE AND CLEANING
Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be used occasionally to clean
surface. Dry immediately. Do not use any abrasives that may damage finish. Excessive exposure to sunlight and
extreme changes in temperature and moisture can damage wood furniture.
LIMITED WARRANTY
Dorel warrants its product to be free from defects in material and workmanship and agrees to remedy any such defect.
This warranty covers 1 year from the date of original purchase. This warranty is valid only upon presentation of proof
of purchase. This is solely limited to the repair or replacement of defective furniture components and no assembly labor
is included. This warranty does not apply to any product which has been improperly assembled, subjected to misuse or
abuse or which has been altered or repaired in any way. This warranty gives you specific legal rights and you may also
have other rights which vary from State to State.
WARNING: Should this product become damaged, and/or
components are broken or missing, DO NOT USE.
MAINTENANCE
Check bolts/screws periodically and tighten them if necessary.
NOTE
* DO NOT place any item on the cart with dimensions exceeding those of the top panel.
* Before moving the cart remove all products off the top panel and make sure the caster wheels are in the unlocked
position.
WARNING
* To prevent damage to the caster wheels, gently lift the cart when sliding it over raised edges on the floor.

1 2 3
4 5 6
7 8
9 10
11 12
CAM BOLT
6 PCS
WOOD DOWEL
6 PCS
∅1/4" x 36mm
∅4mm x 25mm
30mm x 14mm
SHELF SUPPORT
4 PCS
∅5/32" x 20mm
∅6mm x 3mm x 12mm
ROUND HEAD BOLT
2 PCS
ROUND WOOD SCREW
5 PCS
MULTIFUNCTION CART
DA7618/DA7618-DC/DA7618B/DA7618G
HARDWARE LIST
WRENCH
1 PC
DRAWER STOPPER
1 PC
90mm x 25mmx 2mm
57mm x 16mm
∅6mm x 25mm
FLAT HEAD WOOD SCREW
14 PCS
∅1/4" x 64mm
∅15mm x 12mm
CAM LOCK
6 PCS
BOLT
10 PCS
ALLEN KEY
1 PC
HANDLE
1 PC
4mm
141mm x 15mm

A B C
D E F
G
MULTIFUNCTION CART
DA7618/DA7618-DC/DA7618B/DA7618G
PARTS LIST
DRAWER FRONT
1 PC
DRAWER BACK
1 PC
LEFT DRAWER SIDE
1 PC
RIGHT DRAWER SIDE
1 PC
BOTTOM RAIL
2 PCS
BOTTOM SHELF
1 PC
FRONT RAIL
1 PC

H I J
K L M
N O
BACK PANEL
1 PC
RIGHT SIDE PANEL
1 PC
LEFT SIDE PANEL
1 PC
TOP PANEL
1 PC
LOCKING CASTERS
2 PCS
CASTERS
2 PCS
MULTIFUNCTION CART
DA7618/DA7618-DC/DA7618B/DA7618G
PARTS LIST
DRAWER BOTTOM
1 PC
ADJUSTABLE SHELF
1 PC

MULTIFUNCTION CART
DA7618/DA7618-DC/DA7618B/DA7618G
Slide drawer bottom panel (M) into the grooves of the drawer sides (C & D).
Attach right and left drawer side (C & D) to drawer front (A) with flat head wood screws (2).
STEP 1:
Use a Phillips head screwdriver (not included) to tighten the screws and bolts.
Attach drawer back (B) to right and left drawer sides (C & D) with flat head wood screws (2).

STEP 2:
MULTIFUNCTION CART
DA7618/DA7618-DC/DA7618B/DA7618G
Use a Phillips head screwdriver (not included) to tighten the screws and bolts.
Attach handle (11) to drawer front (A) with round head bolts (5).

MULTIFUNCTION CART
DA7618/DA7618-DC/DA7618B/DA7618G
STEP 3:
Insert cam bolts (1) to top panel (L) with a Philips head screwdriver (not included).

MULTIFUNCTION CART
DA7618/DA7618-DC/DA7618B/DA7618G
STEP 4:
Insert wood dowels (3) into bottom shelf (F). Attach bottom rail (E) to bottom shelf (F) with
flat head wood screw (2) using a Phillips head screwdriver (not included).

MULTIFUNCTION CART
DA7618/DA7618-DC/DA7618B/DA7618G
STEP 5:
Attach drawer stopper (9) to front rail (G) with round wood screws (4) using a Phillips head
screwdriver (not included).