Dorel Asia DA6266 User manual

COUNTER HEIGHT DINING SET Model No:
DA6266
UPC CODE:
THIS INSTRUCTION BOOKLET
CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND
KEEP FOR FUTURE REFERENCE.
(TAKEN FROM CARTON)
Date of purchase:
_______ / _______ / _______
NOTE:
Lot number:
DOREL ASIA
0-65857-16537-1
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: [phone]
E-Mail: d[email protected]
Fax #: [phone]
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]

CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact our customer service
representative first!
CALL 1-800-295-1980
You can also order parts by writing to the address listed below. Please include the product model
number, color and a detailed description of the part.
E-MAIL: [email protected]
NOTE
* Ensure all parts and components are present before beginning assembly.
* Assembly and handling may require two people.
Customer Service Department No. 413
12345 Albert-Hudon Boulevard, Suite 100
Montreal, Quebec
Canada H1G 3L1
* CAUTION: Adult assembly required.
* Phillips head screw driver is not included.
CARE AND CLEANING
* Estimated assembly time is 45 - 60 minutes.
* Do not use power tools.
Dorel Asia warrants its product to be free from defects in material and workmanship and agrees to remedy
any such defect. This warranty covers 1 year from the date of original purchase. This warranty is valid only
upon presentation of proof of purchase. This is solely limited to the repair or replacement of defective
furniture components and no assembly labor is included. This warranty does not apply to any product which
has been improperly assembled, subjected to misuse or abuse or which has been altered or repaired in any
way. This warranty gives you specific legal rights and you may also have other rights which vary from State
to State. The warranty does not cover the wearing, tearing, fading or splitting of the leather.
WARNING: Should this product become damaged, and/or
components are broken or missing, DO NOT USE.
Dust table regularly with a soft, dry cloth to prevent soil build up. A dampened cloth may be used
occasionally to clean the surface. Dry immediately and buff lightly, following the grain. Avoid using harsh
cleaners and abrasive products. Use coasters to prevent the formation of moisture rings and trivets to protect
from hot items. Cover extension leaves (if applicable) with a soft protective fabric before storing. Do not
slide objects across the surface - always lift them.
MAINTENANCE
Check bolts/screws periodically and tighten them if necessary.
LIMITED WARRANTY
Leather/ Faux Leather -Dust regularly with a clean, dry cloth to avoid soil build-up. A damp cloth may be
used occasionally to clean surface. Buff dry. Keep leather soft and supple by applying a leather care product
occasionally. Avoid contact with oil, furniture polish and varnish.

1 PC
16 PCS
40 PCS
9
10
ALLEN WRENCH
ALLEN KEY
1 PC
7
8
Ø5/16" X 2-1/4"
Ø8 X 38MM
BOLT
WOOD SCREW
Ø5/16" X 1-1/2"
Ø5/16" X 3"
BOLT
BOLT
4 PCS
16 PCS
FLAT WASHER
SPRING WASHER
3
36 PCS
44 PCS
5
6
NUT
FLAT WASHER
8 PCS
8 PCS
4
Ø5/16" X 19MM
Ø5/16" X 11MM
COUNTER HEIGHT DINING SET
DA6266
HARDWARE LIST
1
2
Ø5/16" X 23MM

TABLE TOP
TABLE LEG
1 PC
4 PCS
COUNTER HEIGHT DINING SET
DA6266
PARTS LIST
A
B
D
BACK FRAME
SEAT FRAME
C
LEFT CHAIR LEG
RIGHT CHAIR LEG
4 PCS
4 PCS
E
F
FRONT STRETCHER
LEFT SIDE STRETCHER
4 PCS
4 PCS
G
H
4 PCS
4 PCS
4 PCS
I
J
RIGHT SIDE STRETCHER
SEAT CUSHION
4 PCS

COUNTER HEIGHT DINING SET
DA6266
STEP 1
Place the table top (A) upside down on a clean, smooth surface to avoid scratches.
Attach table legs (B) to table top (A) with nuts (1), flat washers (2) and spring washers (4). Use
Allen wrench (9) to tighten nuts (1).
With the help of another person, turn the table upright.
①
②
④

COUNTER HEIGHT DINING SET
DA6266
STEP 2
Attach seat frame (D) to the back frame (C) with bolts (6), spring washers (4) and flat washers (3)
through the corners of the seat frame (D). Use Allen key (10) to tighten the bolts (6).
Secure the seat frame (D) to the back frame (C) with bolt (5), spring washer (4) and flat washer (3)
through the center of the seat frame (D). Use Allen key (10) to tighten the bolt (5).
NOTE: Do not fully tighten the bolts. Loose bolts will facilitate assembly in the following steps.
③
⑤
⑥
④

COUNTER HEIGHT DINING SET
DA6266
STEP 3
Connect the front stretcher (G) to the left chair leg (E) and right chair leg (F).
Attach the legs (E & F) to the seat frame (D) with bolts (7), spring washers (4) and flat washers (3).
Use Allen key (10) install the bolts.
NOTE: Do not fully tighten the bolts. Loose bolts will facilitate assembly in the following steps.
⑦
③
④

COUNTER HEIGHT DINING SET
DA6266
STEP 4
Connect the side stretchers (H & I) to the back frame (C) and the legs (E & F) as shown below.
Secure front stretcher (G) and side stretchers (H & I) to legs (E & F) and back frame (C) with wood
screws (8) using a Phillips head screw driver (not included).
Fully tighten all bolts installed on the chair legs (E & F) in step 3.
NOTE: The stretchers must be attached so that the holes for wood screws (8) will face the ground once
the chair is in the upright position. See the below illustration.
The holes on the
stretchers will face the
ground once the chair is
turned over.
⑧

COUNTER HEIGHT DINING SET
DA6266
STEP 5
Attach seat cushion (J) with wood screws (8) as shown below. Use a Phillips head screw driver (not
included) to tighten all wood screws (8).
Fully tighten all bolts previously installed.
NOTE: Once all bolts have been installed, apply a downward force on the chair.
This will help all legs to sit flush on the floor.
Repeat Steps 2 - 5 to assemble the remaining chairs.
⑧

COUNTER HEIGHT DINING SET
DA6266
CAUTION: This unit is intended for use only with the
products and/or maximum weights indicated. Use with other
products and/or products heavier than the maximum weights
indicated may result in instability or cause possible injury.
That's it ! You've finished assembling your dining set.
Product
Maximum
Weight
100 lbs
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: [phone]
E-Mail: [email protected]m
Fax #: [phone]
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]

MODEL #: DA6266
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE
PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING
NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S).
Request Date:
Name:
Shipping Address:
Street & Number:
City & State:
Zip Code:
Day Time Phone Number:
(including area code)
Date & Place of Purchase:
Part(s) description and quantity: (Please be sure to list model number or SKN number)
Customer Service Department No. 413, 12345 Albert-Hudon Boulevard, Suite 100, Montreal, QC, Canada, H1G 3L1
Customer Service
Email: [email protected]
Customer Service Representative Mailing Address:
Customer Service Phone Number 1-800-295-1980
Customer Service Fax Number 514-353-7819