Dorel Asia DA3108 User manual

DA3108
UPC CODE:
THIS INSTRUCTION BOOKLET
CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND
KEEP FOR FUTURE REFERENCE.
(TAKEN FROM CARTON)
_______ / _______ / _______
NOTE:
Lot number:
Date of purchase:
DOREL ASIA
Model No:
0-65857-16520-3
5-PIECE METAL & GLASS
DINING SET
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: [phone]
E-Mail: [email protected]
Fax #: [phone]
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]

CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact our customer service
representative first!
CALL 1-800-295-1980
You can also order parts by writing to the address listed below. Please include the product model
number, color and a detailed description of the part.
E-MAIL: [email protected]
NOTE
* Assembly and handling may require two people.
* Ensure all parts and components are present before beginning assembly.
Customer Service Department No. 413
12345 Albert-Hudon Boulevard, Suite 100
Montreal, Quebec
Canada H1G 3L1
* CAUTION: Adult assembly required.
* Phillips head screw driver is not included.
CARE AND CLEANING
* Estimated assembly time is 45 - 60 minutes.
* To prevent any scratches, please remove all packaging and assemble on a clean, smooth surface.
* Read all instructions completely before assembling.
* Do not use power tools.
Dorel Asia warrants its product to be free from defects in material and workmanship and agrees to
remedy any such defect. This warranty covers 1 year from the date of original purchase. This
warranty is valid only upon presentation of proof of purchase. This is solely limited to the repair or
replacement of defective furniture components and no assembly labor is included. This warranty does
not apply to any product which has been improperly assembled, subjected to misuse or abuse or
which has been altered or repaired in any way. Any wearing, tearing or fading of the fabric is not
covered under the warranty. This warranty gives you specific legal rights and you may also have
other rights which vary from State to State.
WARNING: Should this product become damaged, and/or
components are broken or missing, DO NOT USE.
Dust this item regularly with a soft, lint-free cloth to prevent soil build up. Wipe away spills
immediately to prevent staining using a clean cloth dampened with water. Do not use liquid or
abrasive cleaners on the metal frame as this may damage the finish.
Use a cloth dampened with water or a professional product to clean the fabric. Always test an
inconspicuous area first. Allow upholstery to dry and brush lightly. Keep away from heat to avoid
glazing, melting or scorching.
MAINTENANCE
Check bolts/screws periodically and tighten them if necessary.
LIMITED WARRANTY

HARDWARE LIST
1 2
3 4
5 6
1 PC
4 PCS
Ø1/4" X 1-1/8''
Ø5/32" X 1-1/8''
40 PCS
4 PCS
ALLEN KEY
HEX SOCKET HEAD BOLT
HEX SOCKET HEAD BOLT
8 PCS
5-PIECE METAL & GLASS DINING SET
DA3108
Ø1/4" X 1/2''
Ø1/4" X 1-7/8"
PHILLIPS COUNTERSINK HEAD SCREW
16 PCS
HEX SOCKET HEAD BOLT
RUBBER PAD

PARTS LIST
A B C
D E F
G H I
J
2 PCS
TABLE TUBE BASE
1 PC
1 PC
2 PCS
GLASS TOP
TABLE LEG
SEAT CUSHION
4 PCS
APRON
SEAT SUPPORT
4 PCS
CHAIR TUBE BASE
4 PCS
LEFT LEG
4 PCS
5-PIECE METAL & GLASS DINING SET
DA3108
RIGHT LEG
4 PCS
BACK FRAME
4 PCS

5-PIECE METAL & GLASS DINING SET
DA3108
STEP 1
Attach left leg (B) and right leg (C) to the back frame (A) with hex socket head bolts (3).
Use Allen key (5) to install the bolts.
NOTE: Do not fully tighten the bolts. Loose bolts will facilitate assembly in the following
steps.

5-PIECE METAL & GLASS DINING SET
DA3108
STEP 2
Attach seat support (D) to chair legs (B & C) with hex socket head bolts (1). Use Allen key
(5) to install the bolts.
NOTE: Do not fully tighten the bolts. Loose bolts will facilitate assembly in the following
steps.

5-PIECE METAL & GLASS DINING SET
DA3108
STEP 3
Attach chair tube base (E) to assembled chair frame with hex socket head bolts (3). Use Allen
key (5) to install the bolts.
NOTE: The mounting brackets on tube base (E) have to be positioned in a way that they follow
the angle with the chair legs. This will dictate whether it is upside down or not. Tighten all bolts
previously installed in steps 1, 2 and 3.

5-PIECE METAL & GLASS DINING SET
DA3108
STEP 4
Place seat cushion (F) and the chair frame upside down on a smooth, flat surface. Attach seat
cushion (F) to chair frame with Phillips countersink head screws (2). Use a Phillips head
screwdriver (not included) to install screws. Turn the chair upright.
Repeat steps 1 through 4 to assemble the remaining chairs.
NOTE: Phillips countersink head screws (2) will make their own holes. Do not use power
tools and do not over-tighten the screws.
2

5-PIECE METAL & GLASS DINING SET
DA3108
STEP 5
Attach aprons (I) to table legs (H) with hex socket head bolts (3 & 6) as shown. Use Allen
key (5) to tighten the bolts.
NOTE: Do not fully tighten the bolts. Loose bolts will facilitate assembly in the following
steps.

5-PIECE METAL & GLASS DINING SET
DA3108
STEP 6
Attach table tube base (J) to table legs (H) with hex socket head bolts (3). Use Allen key (5)
to tighten the bolts.
NOTE: Tighten all bolts previously installed in steps 5 and 6.