Dorel Asia QUEEN METAL BED DA3285 User manual

Model No:
DA3285
UPC CODE:
NOTE:
THIS INSTRUCTION BOOKLET
CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND
KEEP FOR FUTURE REFERENCE.
Lot number:
(TAKEN FROM CARTON)
___________________
QUEEN METAL BED
DOREL ASIA
0-65857-16539-5
Date of purchase:
_______ / _______ / _______
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer
service department. We will replace the part FREE of
charge.
Tel #: [phone]
E-Mail: [e-mail]
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]

*
*
*
*
*
*
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact our customer
service representative first! CALL 1-800-295-1980
You can also order parts by writing to the address listed below. Please include the
product model number, color and a detailed description of the part.
Customer Service Department No. 413
12345 Albert-Hudon Boulevard, Suite 100
Dust this item regularly with a soft, lint-free cloth to prevent soil build up. Wipe with a
soft, damp cloth if necessary. Do not use abrasives, cleaners, or polish on the metal
frame as this may damage the finish.
Montreal, Quebec
Canada H1G 3L1
E-MAIL: [email protected]
NOTES
Ensure all parts and components are present before beginning assembly.
Assemble on a clean, smooth surface to prevent damage to product finish.
MAINTENANCE
Check bolts/screws periodically and tighten them if necessary.
LIMITED WARRANTY
Dorel Asia warrants its product to be free from defects in material and workmanship and
agrees to remedy any such defect. This warranty covers 1 year from the date of original
purchase. This warranty is valid only upon presentation of proof of purchase. This is
solely limited to the repair or replacement of defective furniture components and no
assembly labor is included. This warranty does not apply to any product which has been
improperly assembled, subjected to misuse or abuse or which has been altered or
repaired in any way. This warranty gives you specific legal rights and you may also have
other rights which vary from State to State.
WARNING: Should this product become
damaged, and/or components are broken or
missing, DO NOT USE.
DO NOT use power tools.
CAUTION: Adult assembly required.
Assembly and handling will require two people.
Estimated assembly time: 8 minutes.
CARE AND CLEANING

SUPPORT LEG
6 PCS
Parts List
HEADBOARD TOP
1 PC HEADBOARD BOTTOM 1 PC FOOTBOARD 1 PC
SIDE RAIL (WITH 1 BRACKET)
2 PCS SIDE RAIL (WITH 2 BRACKETS) 2 PCS
F
A B C
D1 D2 E
SLAT
3 PCS
QUEEN METAL BED
DA3285

Φ13mm
SPRING WASHER
24 PCS METAL FLAT WASHER 24 PCS RUBBER FLAT WASHER 8 PCS
4 5 6
HEX SOCKET HEAD BOLT
10 PCS
INSIDE DIAMETER: Φ8.5
OUTSIDE DIAMETER: Φ22mm
7
Hardware List
M8 x 19mm M8 x 25mm M8 x 51mm
Φ8.5mm INSIDE DIAMETER: Φ8.5mm
OUTSIDE DIAMETER: Φ16mm
ALLEN KEY
1 PC
Φ5mm
9
ALLEN WRENCH
1 PC
HEX SOCKET HEAD BOLT
8 PCS HEX SOCKET HEAD BOLT 12 PCS
OUTSIDE DIAMETER:
Φ13mm
NUT
6 PCS
8
1 2 3
QUEEN METAL BED
DA3285

QUEEN METAL BED
DA3285
STEP 1
●Attach the headboard top (A) to
headboard bottom (B) with hex socket head
bolts (1), spring washers (4) and metal flat
washers (5). Use Allen Key (8) to tighten
bolts.
STEP 2
●Attach the side rail (D1) to side rail
(D2) with hex socket head bolts (1),
spring washers (4) and metal flat
washers (5). Use Allen Key (8) to
tighten bolts.
1 4 5
8

QUEEN METAL BED
DA3285
STEP 4
●Attach the support legs (F) to the slats (E)
with hex socket head bolts (3). Use Allen
Key (8) to tighten bolts.
STEP 3
●Attach the assembled side rails to the
headboard bottom (B) and footboard (C)
with hex socket head bolts (2), spring
washers (4), metal flat washers (5) and
rubber flat washers (6). Use Allen Key (8) to
tighten bolts.
NOTE- The side rails must be attached as
shown in the below photo so that the metal
brackets face inside the bed frame
D2 & D1
D1
D2
D1 D2

DA3285
QUEEN METAL BED
STEP 5
●Place the slats (E) on the metal brackets
of the side rails (D1&D2). Secure using
hex socket head bolts (3), spring washers
(4), metal flat washers (5) and nuts (7).
Use Allen Key (8) & Allen Wrench (9) to
tighten bolts and nuts.
Ensure that the bed lies evenly on the
floor by turning the adjustable levelers
underneath support legs (F) clockwise.
D2
D2
D1
D1

QUEEN METAL BED
DA3285
Congratulations! You've finished assembling your queen metal bed.
CAUTION: This unit is intended for use only with the
products and/or maximum weights indicated. Use with other
products and/or products heavier than the maximum weights
indicated may result in instability or cause possible injury.
RETURN PRODUCT TO THE STORE.NOTOD
If a part is missing or damaged, contact our customer
service department. We will replace the part FREE of
charge.
Tel #: [phone]
E-Mail: [email protected]
Dust this item regularly
with a soft, lint-free cloth to
prevent soil build up. Wipe
with a soft, damp cloth if
necessary. Do not use
abrasives, cleaners, or
polish on the metal frame
as this may damage the
finish.
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]

MODEL #: DA3285
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE
PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING
NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S).
Customer Service Fax Number 514-353-7819
Request Date:
Name:
Shipping Address:
Street & Number:
City & State:
Zip Code:
Day Time Phone Number:
(including area code)
Date & Place of Purchase:
Customer Service
Customer Service Phone Number 1-800-295-1980
Customer Service Representative Mailing Address:
Customer Service Department No. 413, 12345 Albert-Hudon Boulevard, Suite 100, Montreal, QC, Canada, H1G 3L1
Parts description and quantity: (Please list model number or SKN number)
Email: [e-mail]