Dorel DASE3618DP User manual

NOTE:
THIS INSTRUCTION BOOKLET
CONTAINS IMPORTANT SAFETY
INFORMATION PLEASE READ AND
KEEP FOR FUTURE REFERENCE
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our
customer service department. We will replace
the part FREE of charge.
Tel #: [phone]
E-Mail: da[email protected]
Fax #: [phone]
STORAGE
DRAWERS
OWNER'S
MANUAL
DASE3618DP- PINE
DASE3618DW- WALNUT
Model No.:
ATTACH HERE
RECEIPT OF PURCHASE:
UPC CODE:
(PINE) 0-65857-15561-7
(WALNUT) 0-65857-15560-0
DATE OF PURCHASE:

*
*
*
*
*
Canada H1G 3L1
You can also order parts by writing to the address listed below. Please include the product model
number, color and a detailed description of the part.
CARE AND CLEANING
Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be used
occasionally to clean surface. Dry immediately. Do not use any abrasives that may damage finish.
Excessive exposure to sunlight and extreme changes in temperature and moisture can damage
wood furniture.
Estimated assembly time: 25 minutes.
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact our customer service
representative first!
CALL 1-800-295-1980
E-MAIL: [e-mail]
Customer Service Department No. 413
12345 Albert-Hudon Boulevard, Suite 100
Montreal, Quebec
WARNING: Should this product become
damaged, and/or components are broken or
missing, DO NOT USE.
DOREL ASIA LIMITED WARRANTY
Dorel Asia warrants its product to be free from defects in material and workmanship and agrees to
remedy any such defect. This warranty covers 1 year from the date of original purchase. This
warranty is valid only upon presentation of proof of purchase. This is solely limited to the repair or
replacement of defective furniture components and no assembly labor is included. This warranty
does not apply to any product which has been improperly assembled, subjected to misuse or abuse
or which has been altered or repaired in any way. This warranty gives you specific legal rights and
you may also have other rights which vary from State to State.
MAINTENANCE
Check bolts/screws periodically and tighten them if necessary.
NOTE
Ensure all parts and components are present before beginning assembly.
Assemble on soft, smooth surface to prevent damage to product finish.
DO NOT use power tools.
CAUTION: Adult assembly required.

STORAGE DRAWERS
DASE3618DP PINE / DASE3618DW WALNUT
HARDWARE LIST
FLAT HEAD WOOD SCREW
3mm x 12mm
32 PCS
FLAT HEAD WOOD SCREW
4mm x 25mm
20 PCS
WOOD DOWEL
8mm x 30mm
12 PCS
WHEEL
8 PCS
HANDLE
4 PCS
ROUND HEAD SCREW
4 PCS
CASTER WHEEL - 8 PCS KNOB - 4 PCS
1

STORAGE DRAWERS
DASE3618DP PINE / DASE3618DW WALNUT
DRAWER LEFT SIDE PANEL
2 PCS
DRAWER RIGHT SIDE PANEL
2 PCS
DRAWER BACK PANEL
2 PCS
DRAWER BOTTOM PANEL
2 PCS
DRAWER BOTTOM SUPPORT SLAT
2 PCS
DRAWER FRONT PANEL
2 PCS
PARTS LIST
BOTTOM SUPPORT SLAT - 2 PCS
BOTTOM PANEL - 2 PCS
BACK PANEL - 2 PCS
RIGHT SIDE PANEL - 2 PCS
LEFT SIDE PANEL - 2 PCS
FRONT PANEL - 2 PCS
2

STORAGE DRAWERS
DASE3618DP PINE / DASE3618DW WALNUT
STEP 1
Insert wood dowels (3) into the ends of left side panel (B) and right side panel (C).
Attach left side panel (B) and right side panel (C) to front panel (A) with flat head
wood screws (5) as shown.
Use a Phillips head screwdriver (not included) to tighten flat head wood screws (5)
3

Slide bottom panel (E) into the grooves of left side panel (B), right side panel (C) and front
panel (A). Push the drawer bottom panel (E) to secure it into place.
Attach back panel (D) to left side panel (B) and right side panel (C) with flat head wood screws
(5).
Use a Phillips head screwdriver (not included) to tighten flat head wood screws (5).
STORAGE DRAWERS
DASE3618DP PINE / DASE3618DW WALNUT
STEP 2
4

STEP 3
STORAGE DRAWERS
DASE3618DP PINE / DASE3618DW WALNUT
Attach bottom support slat (F) to front panel (A) and back panel (D) with flat head wood
screws (5) as shown.
Attach caster wheels (1) to bottom panel (E) with flat head wood screws (6) as shown.
Use a Phillips head screwdriver (not included) to tighten flat head wood screws (5 & 6)
5

STEP 4
Repeat the previous steps to assemble the remaining another drawer.
STORAGE DRAWERS
DASE3618DP PINE / DASE3618DW WALNUT
Attach knobs (2) to drawer front panel (A) with round head screws (4).
Use a Phillips head screwdriver (not included) to tighten round head screws (4)
6

DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact
our customer service department. We
will replace the part FREE of charge.
Tel # : [phone]
E-Mail: [email protected]om
Fax #: [phone]
STORAGE DRAWERS
DASE3618DP PINE / DASE3618DW WALNUT
CAUTION: "This unit is intended for use only
with the products and/or maximum weights indicated. Use
with other products and/or products heavier than the
maximum weights indicated may result in instability or
cause possible injury ."
Congratulations! You've finished assembling your Set of Storage Drawers.
Product
Maximum
Weight
15 lbs
7

MODEL #: DASE3618DP PINE / DASE3618DW WALNUT
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE
PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING
NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S).
Request Date:
Name:
Shipping Address:
Street & Number:
City & State:
Zip Code:
Day Time Phone Number:
(including area code)
Date & Place of Purchase:
Part(s) description and quantity: (Please be sure to list model number or SKN number)
Customer Service Representative Mailing Address:
Customer Service Department No. 413, 12345 Albert-Hudon Boulevard, Suite 100, Montreal, QC, Canada, H1G 3L1
Customer Service
Customer Service Phone Number 1-800-295-1980
Email: [email protected]
Customer Service Fax Number 514-353-7819
C
B
E
A
B
B
B