Dorel 9257196COM User manual

–Unit can !p over causing severe injury or death.
–Anchor unit to stud in wall (if instructed to)
–Do not allow children climb on unit
–Put heavy items on lower shelves or drawers
Date of Purchase: ____/____/_____
Lot Number:
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
WARNING
Easy Tough
LIFT TOP DESK
Do Not Return This Product!
Contact our customer service team for help first
Assembly Difficulty Meter

Contact Us!
Helpful Hints
Do NOT return this product!
Contact our friendly customer service team first for help
PEOPLE NEEDED FOR ASSEMBLY: 1-2
ESTIMATED ASSEMBLY TIME: 1 HOUR
Assembly Tips
- Open your item in the area you plan to keep it for less heavy li!ing
- Iden"fy, sort and count the parts before a#emp"ng assembly
- Compression dowels are tapped in with a hammer
- Slides are labeled with a R (right) and L (le!) for proper placement
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge
- Use all the nails provided for the back panel and spread them out equally
- Back Panel must be used to make sure your unit is sturdy
- Do NOT use harsh chemicals or abrasive cleaners on this item
- Never push, pull, or drag your furniture
Call us!
2

Before You Start
Cam Lock Fastening System
P
P
P
P
P
This Cam Lock Fastening System will be usedthroughoutthe assembly process.
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Cauon: If using a power drill or power screwdriver for screwing,
please be aware to slow down and stop when screw is ght.
Failure to do so may result in stripping the screw.
1
3
2
4
Quck
b
m
e
s
i
Tp
Ay
s
i
l
3

Board Iden•fica•on
Not actual size
1
5
2 3
4 6
7
10
8
11
9
12
x1
LIFT TOP PANEL x1
RIGHT TOP PANEL x1
LEFT SIDE PANEL
x1
MIDDLE PARTITION x1
SIDE SUPPORT PANEL
x1
RIGHT SIDE PANEL
x1
FRONT PANEL
x1
RIGHT FRONT APRON x1
UPPER BACK PANEL
x1
UPPER SHELF
x1
LEFT FRAME x1
LEFT FRONT APRON
4

Board Iden•fica•on
Not actual size
13
17
14 15
16 18
19
22
20
23
21
24
x1
LEFT BACK PANEL x1
MIDDLE FRAME
x1
BACK PANEL SUPPOR
x1
RIGHT FRAME x1
MIDDLE RAIL
x1
RIGHT BACK PANEL
x1
LOWER SHELF
x2
LOWER SUPPORT PANEL x2
LOWER SUPPORT PANEL
x1
FOOT
x2
FOOT x1
FOOT
5

Board Iden•fica•on
Not actual size
25
29
26 27
28 30
31
34
32
35
33
36
x1
LEFT SUPPORT PANEL x1 RIGHT SUPPORT PANEL
x4
SUPPORT WOOD BLOCK
x1
UPPER DRAWER FRONT x1
UPPER DRAWER LEFT
x1
UPPER DRAWER RIGHT
x1
UPPER DRAWER BACK
x2
DRAWER BOTTOM x1
MIDDLE DRAWER FRONT
x1
MIDDLE DRAWER LEFT
x1
MIDDLE DRAWER RIGHT x1
MIDDLE DRAWER BACK
6

Board Iden•fica•on
Not actual size
37
41
38 39
40 42
43 44 45
x1
LOWER DRAWER FRONT
x1
LOWER DRAWER LEFT x1
LOWER DRAWER RIGHT
x1
LOWER DRAWER BACK x1
LOWER DRAWER BOTTOM
x1
LIFT MECHANISM
x1
LIFT MECHANISM
x1
SUPPORT TUBE x1
SUPPORT TUBE
7

Part List
Actual Size
x54
TUD0001
Cam Bolt
x54
TUD0002
Cam Lock
15-12
x36
TUD0030
DOWEL 6 X 30
x8
TUD0022
CBS 4 X 30
x39
TUD0009
CBS 4 x 38
x50
TUD0008
CBS 3.5 x 16
x8
TUD0011
PH M4 X 12
x6
TUD0007
CBS 3.5 x 12
8

Part List
Not Actual Size
x1 SET
TUD0049
FULL EXT. SLIDE
350 MM
x2
TUD0050
METAL FILE HOLDER
Ø5 X 356
x12
TUD0047
JCBC SCREW
6 X 40
x4
TUD0048
BARREL NUT
1/4” X 12
x1
TUD0026
ALLEN KEY
M4
x4
TUD0012
HANDLE
x2 SETS
TUD0017
DRAWER SLIDE
350 MM
x8
TUD0052
JCBC SCREW
6 X 30
x8
TUD0053
NUT 6 X 10
x1
TUD0054
WRENCH
10 MM
x8
TUD0041
SPRING WASHER
9

* raw edges are shaded
Step 1
10

* raw edges are shaded
Step 2
x9
TUD0001
22
22
21
21
20
20
23
23
24
23 24
x8
TUD0009
x8
TUD0030
x8
TUD0002
19
11

* raw edges are shaded
Step 3
x6
TUD0001
x1 SET
TUD0016 x12
TUD0008
x1 SET
TUD0049
TUD0049
(Cabinet member)
16
15
12

* raw edges are shaded
Step 4
x2
TUD0030
x6
TUD0002
17
15 18
16
13

* raw edges are shaded
Step 5
x4
TUD0009
x4
TUD0030
14

* raw edges are shaded
Step 6
x7
TUD0001
15
19
11
15

* raw edges are shaded
Step 7
x8
TUD0002 x4
TUD0030
13
15
12
14
11
Proper orientation of CAM LOCK
Quick
Assembly
Tip
16

* raw edges are shaded
Step 8
x1
TUD0012 x2
TUD0011
x12
TUD0001
9
7
8
17

* raw edges are shaded
Step 9
x12
TUD0002
8
6
4
3
9
7
Note : Hole Boring Bo!om
Proper orientation of CAM LOCK
Quick
Assembly
Tip
18

* raw edges are shaded
Step 10
x13
TUD0009
x8
TUD0030
x4
TUD0001
5
8
6
7
10
19

* raw edges are shaded
Step 11
x4
TUD0002 x6
TUD0030
Proper orientation of CAM LOCK
Quick
Assembly
Tip
20