Dorel NIGHTSTAND DL8417-7 User manual

Model No:
UPC CODE:
NOTE:
Lot number:
(TAKEN FROM CARTON)
_____________________________________
CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND
Date of purchase:
_______ / _______ / _______
KEEP FOR FUTURE REFERENCE.
THIS INSTRUCTION BOOKLET
0-65857-19829-4
INSTRUCTION MANUAL
DL8417-7
NIGHTSTAND
DO NOT RETURN PRODUCT TO THE RETAILER.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: [phone]
E-Mail: [email protected]
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]

* Ensure all parts and components are present before beginning assembly.
* Assemble on a soft, smooth surface to prevent damage to the product finish.
* Read all instructions before use.
*
DO NOT use power tools.
* CAUTION: Adult assembly required.
* Assembly may require two people.
* Estimated assembly time is 45-60 minutes
Canada, H1G 3L1
NOTES AND INSTALLATION
CUSTOMER SERVICE
WARNING: Should this product become damaged, and/or
components are broken or missing, DO NOT USE.
Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be used occasionally to clean surface.
Dry immediately. Do not use any abrasives that may damage finish. Excessive exposure to sunlight and extreme changes in
temperature and moisture can damage wood furniture.
Check bolts/screws periodically and tighten them if necessary.
Dorel warrants its product to be free from defects in material and workmanship and agrees to remedy any such defect. This
warranty covers 1 year from the date of original purchase from authorized retailers. This warranty is valid only upon
presentation of proof of purchase. This is solely limited to the repair or replacement of defective furniture components and no
assembly labor is included. This warranty does not apply to any product which has been improperly assembled, subjected to
misuse or abuse or which has been altered or repaired in any way. The warranty does not cover wearing, tearing, fading or
splitting of the fabric (where applicable). This warranty gives you specific legal rights and you may also have other rights
which vary from State to State or Province to Province.
1-YEAR LIMITED WARRANTY
CARE, CLEANING AND MAINTENANCE
Montreal, Quebec
12345 Albert-Hudon Boulevard, Suite 100
Dorel Living - Customer Service Department
You can also contact us by writing to the address listed below. Please include the product model number, color and a detailed description of your
enquiry.

HARDWARE LIST
1 2 3
4 5 6
7 8
910 11
12 13 14
BOLT
14 PCS
Ø1/4" X 40mm
Ø8 X 4 X 35mm
Ø8 X 8mm
SCREW
4 PCS
PLASTIC BARREL NUT
4 PCS
SCREW
22 PCS
BOLT
2 PCS
Ø8 X 4 X 30mm
KNOB
2 PCS
SCREW
2 PCS
Ø9 X 4 X 20mm
CAM BOLT
10 PCS
WOOD DOWEL
6 PCS
NIGHTSTAND
DL8417-7
Ø8 X 30mm
Ø6 X 20mm
ALLEN KEY
1 PC
CAM BOLT
6 PCS
WOOD DOWEL
18 PCS
CAM LOCK
10 PCS
CAM LOCK
6 PCS
M3 X 15mm
S

PARTS LIST
A B C D
E F G H
I J K L
M N O P
Q
2 PCS
BASE CONNECTING RAIL
LEFT SIDE PANEL
1 PC
1 PC
1 PC
BACK TOP RAIL
1 PC
1 PC
RIGHT SIDE PANEL
NIGHTSTAND
DL8417-7
1 PC
1 PC
1 PC
1 PC
DRAWER BOTTOM RAIL
DRAWER FRONT
BACK BOTTOM PANEL
DRAWER BOTTOM
BACK TOP PANEL
1 PC
DRAWER BACK
1 PC
BOTTOM PANEL
1 PC
BASE TOP RAIL
DRAWER LEFT SIDE
TOP PANEL
1 PC
BASE BOTTOM RAIL
1 PC
1 PC
DRAWER RIGHT SIDE
FRONT & BACK RAIL
2 PCS

STEP 1
NIGHTSTAND
DL8417-7
Insert cam bolt (1) into the left and right side panel (B & C) using a Phillips head screwdriver (not
included) as shown.
B
1
C
1
6 PCS
1

STEP 2
NIGHTSTAND
DL8417-7
Insert cam locks (2) and wood dowels (3) into the front and back rails (D), back top rail
(E) and side panels (B & C) as shown.
Attach the rails (D & E) to side panels (B & C).
Secure the rails and panel by rotating the cam locks (2) 1/2 turn clockwise using a Phillips head
screwdriver (not included).
DE
D
B
3
C
2
3
2
6 PCS
6 PCS

STEP 3
NIGHTSTAND
DL8417-7
Insert wood dowels (3) into the bottom panel (N) as shown.
Attach base connecting rails (Q) to bottom panel.
Attach base rails (O & P) to bottom panel (N) with bolts (8).
Use Allen key (7) to tighten the bolts.
P
8
O
N
N
Q
3
7
Q
10 PCS
8
4 PCS
3

STEP 4
NIGHTSTAND
DL8417-7
Insert wood dowels (3) into the side panels (B & C) as shown.
Attach bottom panel (N) to the side panels (B & C) with bolts (8).
Use Allen key (7) to tighten the bolts.
3
CN8
B
7
38
C
N
4 PCS
8
4 PCS
3

STEP 5
NIGHTSTAND
DL8417-7
Insert cam bolts (1) into the top panel (A) as shown.
Insert cam locks (2) and wood dowels (3) into the left and right side panel (B & C) as shown.
Attach top panel (A) to side panels. Secure top panel (A) by rotating the cam locks (2) on side panel (B & C) 1/2 turn
clockwise using a Phillips head screwdriver (not included).
Further secure top panel (A) to the unit with screws (11). Use a Phillips head
screwdriver (not included) to tighten screws.
1
4 PCS
24 PCS
2 PCS
11
4 PCS
3
3
A
11
1
2
A

STEP 6
NIGHTSTAND
DL8417-7
Attach back top panel (F) and back bottom panel (G) to the assembled unit with
screws (14) as shown.
Use a Phillips head screwdriver (not included) to tighten the screws.
F
G

STEP 7
NIGHTSTAND
DL8417-7
Insert cam bolts (4) into the drawer front (H) as shown.
Insert wood dowels (6) and cam locks (5) into the drawer left and right sides (I & J) as shown.
Secure the drawer sides (I & J) to drawer front (H) by rotating the cam locks (5)1/2 turn clockwise using
a Phillips head screwdriver (not included).
S
6
4 PCS
4 PCS
45 PCS
5
S
S
6
H
5
4
6
H54
5
J
I
S
S

STEP 8
Slide the drawer bottom (L) into the grooves of drawer left and right sides and drawer front.
Insert wood dowel (6) and cam lock (5) into the drawer bottom rail (M) as shown in figure 1.
Secure drawer bottom rail (M) to drawer front by rotating the cam lock (5) 1/2 turn clockwise
using a Phillips head screwdriver (not included).
Insert cam bolt (4) into drawer back (K) as shown in figure 2.
Insert wood dowel (6) and cam lock (5) into the drawer bottom rail (M) as shown in figure 2.
Attach drawer back (K) to the drawer sides with screws (12) and plastic barrel nuts (13). Secure
drawer bottom rail (M) to drawer back (K) by rotating the cam lock (5) 1/2 turn clockwise using a
Phillips head screwdriver (not included).
NIGHTSTAND
DL8417-7
1 PC 4 PCS
S
62 PCS
13
5
12
4
4 PCS
2 PCS
13 K6
Figure 2
* USE FLAT HEAD
SCREWDRIVER (NOT
INCLUDED) TO ALIGN
PLASTIC BARREL
NUT WITH SCREW.
13
L
12
4
13
12
K
M
12
5
L
6
Figure1
M
5

STEP 9
NIGHTSTAND
DL8417-7
Insert the drawer into the assembled unit.
Attach knobs (10) with bolts (9) using a Phillips head screwdriver (not included).
2 PCS
10
2 PCS
9
10
9

That's it! You've finished assembling your Nightstand!
NIGHTSTAND
DL8417-7
CAUTION: This unit is intended for use only with the
products and/or maximum weights indicated. Use with other
products and/or products heavier than the maximum weights
indicated may result in instability or cause possible injury.
DO NOT RETURN PRODUCT TO THE RETAILER.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: [phone]
E-Mail: [email protected]
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]
Drawer
maximum
weight 15 lbs.
Top panel
maximum weight
25 lbs.
Bottom panel
maximum weight
25 lbs.

Modelo No:
DL8417-7
CODIGO UPC
0-65857-19829-4
NOTA:
ESTE MANUAL DE INSTRUCCIONES
CONTIENE INFORMACIÓN DE
SEGURIDAD IMPORTANTE. POR
FAVOR LÉALA Y CONSÉRVELA
PARA REFERENCIA FUTURA.
Numero de lote:
(TOMADO DEL CARTON)
___________________
MANUAL DE INSTRUCCIONES
MESA DE NOCHE
Fecha de compra:
_______ / _______ / _______
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]
NO DEVUELVA EL PRODUCTO A LA TIENDA.
Si falta una pieza o está dañada, contacte nuestro departamento de servicio a
la clientela. Reemplazaremos la pieza SIN cargo.
Tel #: [phone]
Correo electrónico: [email protected]

*
*
*
*
*
*
*
Canada, H1G 3L1
SERVICIO AL CLIENTE
También puede contactarnos escribiendo a la dirección que figura a continuación. Por favor incluya el
número de modelo del producto, el color y una descripción detallada de su pregunta.
Dorel Living - Customer Service Department
12345 Albert-Hudon Boulevard, Suite 100
Montreal, Quebec
CUIDADO, LIMPIEZA Y MANTENIMIENTO
NOTAS E INSTALACIÓN
Asegúrese de tener todas las piezas y componentes antes de comenzar a armarla.
Ármela sobre superficies limpias y blandas para evitar dañar el pulido del producto.
Lea todas las instrucciones antes de usar el producto.
NO use herramientas eléctricas.
PRECAUCIÓN: El producto debe ser armado por un adulto.
Pueden necesitarse dos personas para armar el producto.
Tiempo estimado para armar el producto: 45-60 minutos.
Quítele el polvo regularmente con un paño suave y seco, para evitar que la suciedad se acumule.No
remojar ni lavar en agua caliente. Limpie con un paño suave y húmedo si es necesario. No use
abrasivos, limpiadores o productos para pulir.
Revise todos los pernos, tornillos y sujetadores periódicamente y apriételos si es necesario.
GARANTÍA LIMITADA DE 1 AÑO
Dorel garantiza que este producto está libre de defectos de material y mano de obra y se compromete a
remediar cualquier defecto de este tipo. Esta garantía cubre 1 año a partir de la fecha de compra original.
Esta garantía es válida solamente con presentación de una prueba de compra. Esto se limita a la
reparación o reemplazo de componentes defectuosos del mueble y no se incluye ningún trabajo de
ensamblaje. Esta garantía no se aplica a ningún producto que haya sido mal ensamblado, sujeto a mal uso
o abuso, o que haya sido alterado o reparado de cualquier manera. Cualquier uso, rotura o pérdida de
color de la tela no están incluidos en esta garantía (donde corresponda). Esta garantía le da derechos
legales específicas y usted puede también tener otros derechos que varían de estado a estado o de
provincia a provincia.
ADVERTENCIA: Si este producto está dañado y/o ciertas piezas
faltan o están rotas, NO LO USE.

LISTA DE TORNILLOS Y ACCESORIOS
1 2 3
4 5 6
7 8
910 11
12 13 14
MESA DE NOCHE
DL8417-7
Ø8 X 30mm
PERNO DE LEVA
10 PZAS
SEGURO DE LEVA
10 PZAS
CLAVIJA DE MADERA
18 PZAS
Ø1/4" X 40mm
Ø6 X 20mm
PERNO DE LEVA
6 PZAS
SEGURO DE LEVA
6 PZAS
CLAVIJA DE MADERA
6 PZAS
LLAVE ALLEN
1 PZA
PERNO
14 PZAS
Ø9 X 4 X 20mm
Ø8 X 4 X 30mm
PERNO
2 PZAS
PERILLA
2 PZAS
TORNILLO
2 PZAS
Ø8 X 4 X 35mm
Ø8 X 8mm
M3 X 15mm
TORNILLO
4 PZAS
TUERCA BARRILETE DE
PLÁSTICO
4 PZAS
TORNILLO
22 PZAS
S

LISTA DE PIEZAS
A B C D
E F G H
I J K L
M N O P
Q
PANEL SUPERIOR
PANEL LATERAL
IZQUIERDO
PANEL LATERAL
DERECHO
RIELES DELANTERO Y
POSTERIOR
MESA DE NOCHE
DL8417-7
1 PZA
1 PZA
1 PZA
2 PZAS
RIEL SUPERIOR
POSTERIOR
PANEL SUPERIOR
INFERIOR
PANEL INFERIOR
POSTERIOR
PANEL FRONTAL DEL CAJÓN
1 PZA
1 PZA
1 PZA
1 PZA
LADO IZQUIERDO DEL
CAJÓN
LADO DERECHO DEL
CAJÓN
PANEL POSTERIOR DEL
CAJÓN
PANEL INFERIOR DEL CAJÓN
1 PZA
1 PZA
1 PZA
1 PZA
RIEL INFERIOR DEL
CAJÓN
PANEL INFERIOR
RIEL INFERIOR D ELA
BASE
RIEL SUPERIOR DE LA BASE
1 PZA
1 PZA
1 PZA
1 PZA
RIEL DE CONEXIÓN DE
LA BASE
2 PZAS

ETAPA 1
MESA DE NOCHE
DL8417-7
Inserte el perno de leva (1) en el panel lateral izquierdo y derecho (B y C) con un destornillador Phillips
(no incluido) como se muestra.
B
1
C
1
6 PCS
1

ETAPA 2
MESA DE NOCHE
DL8417-7
Inserte las cerraduras de leva (2) y las clavijas de madera (3) en los rieles delantero y posterior (D), el
riel superior posterior (E) y paneles laterales (B y C) como se muestra.
Fije los rieles (D y E) a los paneles laterales (B y C).
Asegure los rieles y el panel girando los seguros de leva (2) media vuelta en el sentido horario con un
destornillador Phillips (no incluido).
DE
D
B
3
C
2
3
2
6 PCS
6 PCS