Dorel WM275P2CGL-DC User manual

WM275P2CGL-DC (Natural)
WM 275E-CGL (Deep Walnut)
WM275ECGL-DC (Deep Walnut)
UPC CODES:
WM275P2CGL-DC : 0-65857-15041-4
WM275E-CGL : 0-65857-15672-0
WM275ECGL-DC : 0-65857-15039-1
(TAKEN FROM CARTON)
NOTE:
THIS INSTRUCTION BOOKLET
CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ
5-PIECE WOOD & METAL
DINING SET
DOREL ASIA
Model No:
_______ / _______ / _______
Date of purchase:
AND KEEP FOR FUTURE
REFERENCE.
Lot number:
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our
customer service department. We will replace the
part FREE of charge.
Tel #: [phone]
E-Mail: [email protected]
Fax #: [phone]
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]
DorelLiving.com/5pcDining

Canada H1G 3L1
E-MAIL: [email protected]
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact our customer service representative first!
CALL 1-800-295-1980
Customer Service Department No. 413
You can also order parts by writing to the address listed below. Please include the product model number,
color and a detailed description of the part.
12345 Albert-Hudon Boulevard, Suite 100
Montreal, Quebec
WARNING
* Assembly and handling may require two people.
* Estimated assembly time is 45 - 60 minutes.
* To prevent any scratches, please remove all packaging and assemble on a clean, smooth surface.
Dust table regularly with a soft, dry cloth to prevent soil build up. A dampened cloth may be used
occasionally to clean the surface. Dry immediately and buff lightly, following the grain. Avoid using harsh
cleaners and abrasive products.
Use coasters to prevent the formation of moisture rings and trivets to protect from hot items. Cover
extension leaves (if applicable) with a soft protective fabric before storing. Do not slide objects across the
surface - always lift them.
MAINTENANCE
* Read all instructions completely before assembling.
* Do not use power tools.
* CAUTION: Adult assembly required.
* Phillips head screw driver is not included.
Dorel warrants its product to be free from defects in material and workmanship and agrees to remedy any
such defect. This warranty covers 1 year from the date of original purchase. This warranty is valid only upon
presentation of proof of purchase. This is solely limited to the repair or replacement of defective furniture
components and no assembly labor is included. This warranty does not apply to any product which has been
improperly assembled, subjected to misuse or abuse or which has been altered or repaired in any way. This
warranty gives you specific legal rights and you may also have other rights which vary from State to State.
WARNING: Should this product become
damaged, and/or components are broken or missing,
DO NOT USE.
Check bolts/screws periodically and tighten them if necessary.
LIMITED WARRANTY
* Inspect all parts for damage before assembly. If any parts are damaged or missing, please contact
Customer Service for replacement parts. In the case of a damaged table top, the set must be returned to the
place of purchase for an exchange.
* Avoid exposing the wood to any type of moisture or direct heat that could cause damage to the wood.
CARE AND CLEANING

HARDWARE LIST
5-PIECE WOOD & METAL DINING SET
WM275P2CGL-DC / WM275E-CGL / WM275ECGL-DC
Φ1/4"×1-1/4" Φ5/32"×1-1/8" Φ1/4"×1/2"
Φ1/8"×5/8" Φ1/4"×2-1/8"
HEX SOCKET HEAD BOLT
8PCS PHILLIPS COUNTERSINK
SCREW -16 PCS
HEX SOCKET HEAD BOLT
36 PCS
PHILLIPS ROUND
HEADSCREW
4 PCS
ALLEN KEY
1 PC
HEX SOCKET HEAD BOLT
4 PCS

PARTS LIST
5-PIECE WOOD & METAL DINING SET
WM275P2CGL-DC / WM275E-CGL / WM275ECGL-DC
BACK FRAME
4 PCS
.
LEFT LEG
4 PCS
.
RIGHT LEG
4 PCS
.
SEAT SUPPORT
4 PCS
.
TUBE BASE
4 PCS
.
SEAT CUSHION
4 PCS
.
TABLE LEGS
2 PCS
.
APRON
2 PCS
.
TABLE TOP
1 PC
.

5-PIECE WOOD & METAL DINING SET
WM275P2CGL-DC / WM275E-CGL / WM275ECGL-DC
STEP 1
Attach table legs (G) to aprons (H) with hex socket head bolts (6) and (3) as
shown. Use Allen key (5) to tighten bolts.
3

5-PIECE WOOD & METAL DINING SET
WM275P2CGL-DC / WM275E-CGL / WM275ECGL-DC
STEP 2
Place the tabletop (I) upside down on a flat, smooth surface. Place
previously assembled table frame upside down onto tabletop and center the
frame onto it. Use Phillips head screwdriver (not included) to install Phillips
round head screws (4).
NOTE: Phillips round head screws (4) will make their own holes. Do not
use power tools and do not over tighten screws.
Use these round
markings to align the
table frame. The screws
are self-
drilling and will
make their own holes.
4

5-PIECE WOOD & METAL DINING SET
WM275P2CGL-DC / WM275E-CGL / WM275ECGL-DC
STEP 3
Attach left leg (B) and right leg (C) to the back frame (A) with hex socket head
bolts (3). Use Allen key (5) to install bolts.
NOTE: Do not fully tighten bolts. Loose bolts will facilitate assembly in the
following steps.
3

5-PIECE WOOD & METAL DINING SET
WM275P2CGL-DC / WM275E-CGL / WM275ECGL-DC
STEP 4
Attach seat support (D) to legs (B) and (C) with hex socket head bolts (1).
Use Allen key (5) to install bolts.
NOTE: Do not fully tighten bolts. Loose bolts will facilitate assembly in the
following steps.

5-PIECE WOOD & METAL DINING SET
WM275P2CGL-DC / WM275E-CGL / WM275ECGL-DC
STEP 5
Attach tube base (E) to chair frame with hex socket head bolts (3). Use Allen
key (5) to install bolts.
NOTE: The mounting brackets on tube base (E) have to be positioned in a
way that they follow the angle with the chair legs. This will dictate whether
it is upside down or not. Tighten all bolts previously installed in steps 1, 2
and 3.
3

5-PIECE WOOD & METAL DINING SET
WM275P2CGL-DC / WM275E-CGL / WM275ECGL-DC
STEP 6
Place seat cushion (F) and chair frame upside down on a smooth, flat surface.
Attach seat cushion (F) to chair frame with Phillips countersink head screws (2).
Use Phillips head screwdriver (not included) to install screws. Repeat steps 1
through 4 to assemble remaining chairs.
NOTE: Phillips countersink head screws (2) will make their own holes. Do not
use power tools and do not over tighten screws.