DOT DOTH-300 User manual

DOT
DOTH-300
USER MANUAL
ISO 9001 MS WEPP

시작하기 전에...
1. This user manual can be changed without notice in accordance with
improvement of the product or change in the functions.
2. This user manual has been prepared based on information available
at present and may have technical or editorial errors or omissions.
3. The screen and shape of the product in this manual may differ from
those of the actual product.
4. All the contents of this manual is protected by Copyright Law.
5. All the rights for the program loaded in this product belong to DO
Tel Co., Ltd. and are protected by Copyright Law.
6. Among the contents specified in this manual, the functions not
installed in your PDA (Wireless LAN, Bluetooth, Scanner, Camera,
Phone, RFID, etc.) cannot be used.
Tip
1. This product is a B grade domestic broadcasting/communication
equipment.
2. This product is electromagnetic compatibility registeredas
domestic (B grade) equipment and is mainly for domestic use but
can be used anywhere.
Before Starting…

Consent on Copyright and Use…
1. All the contents in this manual and PDA software are protected by Copyright
Law and all the rights belong to DOTel Co., Ltd.
2. No part of this manual may be duplicated, renovated or translated into other
languages without a prior written consent. We notify you in advance that act
of duplicating, correcting or distributing this manual without permission will
be an object of criminal punishment in accordance with Copyright Law.
3. As to instructions for separate business programs not specified in this
manual, and questions about and after service for such programs, please
contact the software provider.
4. For all other application programs loaded separately onto this product except
the basic program, each product provider should specify contact information
required to make inquiries or ask for technical support on the product
manual or on the packing box, or enclose a separate manual with contact
information.
5. DOTel Co., Ltd. Does not provide any warranty for all the software units
loaded after PDAs are shipped out of the factory.
6. DOT is a trademark of DOTel Co., Ltd. protected by law.
7. The logos and product names, Microsoft, Windows and Internet
Explorer, are trademarks of Microsoft and MS Windows CE software
loaded in this product is a product officially licensed by Microsoft.
8. All the product names and program names used in this manual and the
product are company names, symbols, trademarks or registered
trademarks of each owner.
9. DOTel Co., Ltd. may ask the application program providers to provide
their software loaded in this product on request of mobile
communication providers or for improvement or verification of the
products.

1. Important Notices…
!! Do not use the product while driving. Be sure to observe traffic related laws as,
otherwise, it may cause a car accident.
Be sure to carefully read this user manual as not observing the cautions may cause
injury of the user or other persons, or physical losses.
The manufacturer and seller do not take any responsibilities for all the accidents
occurred due to not observing the cautions specified in this manual.
This product should be used only for the established purpose. Do not use the
product for other purposes than those specified in the user manual.
Be careful not to hurt your hands when handling the product box, manual and
component parts.
If there is smell of burn or excessive heat from the product while in use, remove
the battery and immediately contact the after service center guided in this manual.
Be sure to use the product in a bright place to protect your eyesight, as looking into
the LCD screen in a dark place for a long period of time may hurt your eyesight.
We recommend you to back up important data in this product without fail. The
seller and manufacturer do not take any responsibility for data loss. Especially,
when you ask for repair of the product, be sure to back up the data. The
manufacturer and seller as well as the after service center do not take any
responsibility for data loss.
Do not place the product near magnets or magnetic fields. It may cause failure of
the product.

1. Important Notices…
!!
Do not handle the product with wet hands as it may cause malfunction of the
product and, especially, if theAC adapter is handled with wet hands, there is a risk
of electric shock.
Use the LCD screen with a stylus pen provided by the manufacturer or a tool not
pointed. Otherwise, the LCD may be damaged.
The film attached on the LCD is a film used to protect the LCD. If the product is
used with the film on, accurate operation may not be achieved. Be sure to use the
product after replacing the film with the LCD protection film separately provided.
When using USB cable, adapter and snap-on, be careful with the direction of
connector insertion. If it is inserted the other way around, it may cause a problem
for PDA or PC. Also, do not use extremely bent or pressed by heavy object cable.
The product may not properly operate in very cold winter or hot summer. The
proper operating temperature is between -10ºC ~ 50ºC. Be especially careful to
avoid storing the product in a place too hot or cold, or too moist. This may cause
external change or product damage.
In following cases, warranty service will not provided or repairing may be
impossible:
-If the product has been disassembled or remodeled by user’s self;
-If the product has fallen into the water or stored in a moist place for
a long period of time;
-If the product has been dropped from a high place or received
excessive external shock.
Charge the battery fully for at least 30 minutes or longer before using the product
for the first time. The product may not turn on before the battery is charged.

1. Import Notices…
!!
Be careful when using the battery. If batteries not provided by the manufacturer are
used, there is a risk of product failure or explosion.Also, keep the battery away to
prevent children or pets from biting or sucking the battery. Be careful to prevent
metal objects from contacting the charging terminals of the battery as it may cause
fire.
Turn off the power of the product in places where use of the product is prohibited.
Especially, the power should be turned off without fail in places where radio wave
problem may occur such as in an airplane or in a hospital. Electromagnetic wave
generated by the product not harmful to a human body may cause problems for
electronic flight equipment or medical instruments.
Duplicating an Electric Serial Number (ESN) of a mobile phone is illegal and the
person who has committed or used the duplication may be sentenced to
imprisonment of 3 years or shorter or penalty of 20 million Won or less in
accordance with Radio Wave Law. Also, the person who has illegally provided or
been provided with an ESN may be sentenced to imprisonment of 3 years or
shorter or penalty of 10 million Won or less, and the person who has had in
possession or used an ESN for the purpose of duplication may be sentenced to
imprisonment of 3 years or shorter or penalty of 50 million Won or less.
Accordingly, you should not ever duplicate or illegally use an ESN.
Do not paint a color or attach stickers with metal ingredient on the product. It may
cause buttons not to operate or a problem for receipt or transmission of radio wave.
Do not shoot the bar code laser of the bar code reader to eyes of a person or an
animal. In the extreme case, it may cause blindness.

…………………………………………………………………
2.1 Package Components
Basic Components
Additional Components
2. Before Using
Tip
The specification and components of this product may change
according to the situation of the manufacturer.
Body Earphone USB cable Snap-on Cradle
Tow Standard Battery Adapter Manual CD
Cigar Jack Extended Battery Vehicle Mount Leather Case

……………………………………………………………….
2.2 Product Description
Name of Each Part
2. Before Using…
Name
Description
①LCD
Touch screen on which information is displayed
②Receiver
Part used as receiver where sound is output during telephone conversation
③Button
Buttons used to enter phone numbers, or start or terminate the call
④Barcode Reader
Part where laser is output for bar code scanning
⑤Camera & Flash
Camera and flash used to take pictures
⑥Battery switch
Switch used to mount or remove the battery
⑦Battery
Standard or large capacity battery
⑧Barcode Scanner Button
Button used for bar code recognition
⑨Earphone
Hole into which the earphone is inserted
⑩Volume Increase/Decrease Button
Button used to increase / decrease the volume of telephone conversation
⑪Strap
Part to tight user’s hand with the device
⑫Speaker
Part of the sound output
⑬Sleep Button
Button used to turn on and off the LCD with the power on
⑭Battery Charging Sign
Part to show the state of battery while the battery is charged
⑮Mike
Part used as speaker where sound is input during telephone communication.

……………………………………………………………….
2.2 Product Description
2. Before Using…
Explanation about Button Function
Button
Function
~
These are used basically to enter numbers
and can also be used to enter letters.
The button is used to convert the function of
key to English letter or symbol key.
This button is used to delete one letter when
entering letters.
It is used to connect to the latest call and to
receive an incoming call during execution of
phone program.
It is used fully to end a call.
It moves the cursor to four directions, up,
down, left and right.
It is used to turn on or off the and also used
as a sleep mode.
It is used when the bar code is read.
It can increase or reduce the volume of
phone conversation.
There are three functions; Leaving a space/
Executing/ Jumping a zone.
There are two functions; Entering Capital/
Selecting a zone.
It is used to reset programs. Time, date and
the value of resist are kept.
+
It is used to reset the product. But, time and
date should be reset.

……………………………………………………………….
2.2 Product Description
To Connect Power and Charge
2. Before Using…
Connect the charging gender into the
gender insertion hole at the bottom of
the terminal.
1
Connect the adaptor to the power connector
at the right side of the gender.
2
During charging, the LED at the right top of the
product lights in red color and, when charging is
completed, it changes to green.
3
Battery Charging and Duration
Standard Battery Extended Battery
Time required for
charging
Continuous
call time
Continuous
standby time
Tip
The time required for battery
charging is the time calculated
using an exclusive charger and the
charging time and duration differ
according to charging status and
environment in which the product
is used.
- Duration of the batter may differ according to service form of the communication provider,
environment in which the product is used and the period the battery is used.
- Battery will be consumed even when the product is not used. Especially, battery is a consumable part.
Purchase and use a new battery if one time duration after charging has been considerably reduced.
- While the warranty period for PDA is one year, that of the battery is six months.

……………………………………………………………….
2.3 To connect with a PC
To installActive Sync
2. Before Using…
In order to connect (synchronize) PDA with a PC,
Microsoft program called ActiveSync is required.
For installation, execute ‘Install Program’ and
press ‘Next’. At this time the PDA and PC should
not be connected.
1
Agree with the license of Microsoft
ActiveSync. Select ‘Agree’ and
press ‘Next’.
2
Enter ‘User Name’ and ‘Organization’ and
press ‘Next’.
3
Check the disk capacity which can be used
for installation and change the installation
location by pressing ‘Change’ or press
‘Next’ if you want to install it in the default
location.
4

……………………………………………………………….
2.3 To connect with a PC
To installActive Sync
2. Before Using…
We are fully prepared for installation of
ActiveSync. Execute installation by pressing
‘install’.
5
Installation of ActiveSync will be
performed. It may take several
minutes depending on the
environment of the user PC. Wait for
a while.
6
Installation of ActiveSync has been
completed. Finish installation by
pressing ‘Finish’.
7
Now, connect the PDAwith the PC
using the gender.
8

……………………………………………………………….
2.3 To connect with a PC
To installActive Sync
2. Before Using…
‘Found New hardware’ starts after connecting. Driver will be executed
automatically in PC .
9
10
Installation of ActiveSync has been
completed and synchronization will
start.
Tip
Install Active Sync and driver as above when OS of the PC you
used is Windows 2000, Windows XP.
Execute Windows Mobile Device Center without installing Active
Sync and Driver when OS is Windows Vista or Windows 7.
The latest version of ActiveSync can be downloaded on Microsoft
homepage.

……………………………………………………………….
3.1 About the Home Screen
Setting Locking Function
3. User Interface
The screen will be shown like
the right picture after touching
Device Unlocked on standby
screen. Closing the function can
be closed by touch sliding.
The PIN number box is
displayed after touch sliding if
the PIN number is set.
Status Window
Pop-up menu is shown
when you touch the status
bar on the above screen.
User can see Expansion,
Sync, Sound, Battery and
Alarm on the Pop-up menu.

……………………………………………………………….
3.1 About the Home Screen
Wireless Manager
3. User Interface
Wireless Manager can
manage Bluetooth, Phone and
Wi-Fi on/off.
Efficient battery management
is possible by ending unused
functions
Clock &Alarms
Set date, time and alarm. The time is automatically set depending on the region setting and
also can be controlled arbitrarily.

……………………………………………………………….
3.1 About the Home Screen
Messaging
3. User Interface
Unread text message and
Email can be checked.
E-mail is needed to Setup
processing that makes email
interwork with user’s
account. It needs an account
address and a password.
The explanation of the
function of text message is
on the next page.
Tasks
Tasks is the function of
managing ongoing work or
task.
It supports the efficient
work process by
prioritizing the.

……………………………………………………………….
3.1 About the Home Screen
Calendar
3. User Interface
It supports the function
to manage appointments,
anniversaries and schedule
according to date.
Alarm setting and writing
the relative information
are available
Searching the Internet
Input a word that you want to search for.
Start searching the Internet.
The device is needed to connect to Wireless LAN
to search the internet.
The basic searching engine is set to bing engine of
Microsoft.

……………………………………………………………….
3.1 About the Home Screen
Getting Started
3. User Interface
‘Getting Started’
You can make a decision whether Getting Stared is
shown or not on Hone Screen through Add/remove
Getting Started menu.
Quick menu will be shown to set up several
basic functions.

……………………………………………………………….
3.2 Title Bar Status Icons
Icons
3. User Interface
The network, phone, volume, battery and time of current device is shown as
icons on the status bar. The following is explaining the meaning of each icon.
Title Bar Status Icon Descriptions
Icons
Explanation
You have a new notification.
You have a new text message.
You have a new e-mail message.
You have a new instant message.
You missed a call.
The speakerphone is on.
The phone is roaming.
An alarm is set.
The microphone is on.
An internet call is in progress.

……………………………………………………………….
3.2 Title Bar Status Icons
Icons
3. User Interface
Icons
Explantion
A bluetooth headset is detected.
An ActiveSync connection has been established.
There was a problem with the ActiveSync synchronization.
An ActiveSync synchronization is in progress over USB.
A UMTS network is available.
Connecting to a UMTS network.
A UMTS connection is active.
A 3G+ network is available.
An EDGE network is available.
Connecting to an EDGE network.
An EDGE connection is active.
A GPRS network is available.
Connecting to a GPRS network.
A GPRS connection is active.
An HSDPA network is available.
Connecting to an HSDPA network.
An HSDPA connection is active.