Doughpro DP1100 User manual

formerly DOUGHPRO. New Name. Same Quality. Superior Service.
proluxe.com
Operations Manual
Model: DP1100
Manual Dough Press

DOUGHPROPROPROCESSCORPORATION
PARTSLISTFORDP1100DOUGHPRESS
DP1100A DP1100B DP1100C
120 ~ AC 240 ~ AC 240 ~ AC
1 KNOB, THICK / THIN 1109309 1109309 1109309
2 HOUSING, INSTRUMENT 110118122 110118122 110118122
3 CABLE STRAIN RELIEF MPSS168 MPSS168 MPSS168
4 SCREW, HOUSING SF142034 SF142034 SF142034
5 HANDLE SOCKET 11016650 11016650 11016650
6 BRACKET, HOUSING 110144130 110144130 110144130
7 CAM RAMP ASSEMBLY 1109310 1109310 1109310
8 RETAINING CLIP (CAM RAMP) MPSC240 MPSC240 MPSC240
9 SET SCREW, GEAR BAR ASSEMBLY SST142038 SST142038 SST142038
10 GEAR RACK 1109380 1109380 1109380
11 PISTON ASSEMBLY 11018974 11018974 11018974
12 LOCKING BOLT, ADJUSTMENT BH51618134G5 BH51618134G5 BH51618134G5
13 BOLT, LEVEL ADJUSTMENT 1109367 1109367 1109367
14 SHROUD, UPPER PLATEN 1109336 1109336 1109336
15 LOWER PLATEN ASSEMBLY 11015932 11015932 11015932
16 KNOB, LOWER PLATEN (SWING) 110017 110017 110017
17 HANDLE BRACKET (LOWER PLATEN) 11063 11063 11063
18 CAP, VINYL (ADJUSTMENT SCREWS) SC0687 SC0687 SC0687
20 UPPER PLATEN WITH WIRING 110074100 110075100 110075100
21 BASE ASSEMBLY WITH POST 1109311 1109311 1109311
23 SHIM, GEAR RACK 110144120 110144120 110144120
24 COVER PLATE, BASE 11010954 11010954 11010954
25 STOP, LOWER PLATEN 110102130 110102130 110102130
26 POWER CORD 110969174 110969175 110969176
27 PLATE, LOWER PLATEN LOCK ASSEMBLY 11030623 11030623 11030623
28 TENSION STRAP ASSEMBLY 11041663 11041663 11041663
29 HANDLE, PRESSURE 1109390 1109390 1109390
30 ARM 110102121 110102121 110102121
31 SCREW SP832516 SP832516 SP832516
32 GEAR BAR 1109361 1109361 1109361
33 COLLAR, GEAR BAR 11013183 11013183 11013183
34 PINION GEAR 1109360 1109360 1109360
35 CLAMP, CABLE CC38 CC38 CC38
36 SCREW, CLAMP, CABLE SP83238 SP83238 SP83238
37 SCREW, TENSION STRAP ADJUSTMENT SSH1420314 SSH1420314 SSH1420314
38 SCREW, GROUND SP8321 SP8321 SP8321
39 TRANSFORMER 11096975 11096975 11096976
40 WASHER WSAE8 WSAE8 WSAE8
41 SCREW SB142034 SB142034 SB142034
42 SCREW, LOWER PLATEN LOCK ASSY SB5161834 SB5161834 SB5161834
43 SENSOR ASSEMBLY 110949110 110949110 110949110
44 SET SCREW, SENSOR SST381612 SST381612 SST381612
45 TERMINAL BLOCK 11096914 11096914 11096914
46 SCREW, TERMINAL BLOCK SP83212 SP83212 SP83212
47 SOLID STATE RELAY MPR90217 MPR90217 MPR90217
49 MICRO SWITCH V15G31C25K V15G31C25K V15G31C25K
50 SCREW, MICRO SWITCH SR44058 SR44058 SR44058
51 WIRE HARNESS 110560051 110560051 110560051
52 SCREW, GEAR RACK SSH381634 SSH381634 SSH381634
53 CONTROL PANEL OVERLAY OPRODP1100 OPRODP1100 OPRODP1100
54 CONTROL FACIA 11086027 11086027 11086027
55 DIGITAL CONTROL 11096905211 11096905211 11096905211
56 SPACER, NYLON 110969111 110969111 110969111
57 NUT, DIGITAL CONTROL NH632 NH632 NH632
58 WASHER LOCK INT, DIGITAL CONTROL WLIT6 WLIT6 WLIT6
60 FLANGED BUSHING 110102167 110102167 110102167
61 WASHER LOCK INTERNAL, GROUND WLIT8 WLIT8 WLIT8
REF. # DESCRIPTION
PLDP1100R616862,21146123113.DOC

DP1100A DP1100B DP1100C
120 ~ AC 240 ~ AC 240 ~ AC
REF. # DESCRIPTION
62 NUT, GROUND NH832 NH832 NH832
63 BUSHING, BRASS (TENSION STRAP) 11018966 11018966 11018966
64 MICROSWITCH BRACKET 1101021213 1101021213 1101021213
65 WOODRUFF KEY KW931634 KW931634 KW931634
67 ZERK FITTING B792 B792 B792
69 BUSHING, INSTRUMENT HOUSING 212NN01420000 212NN01420000 212NN01420000
70 SCREW, HANDLE SOCKET SST142078 SST142078 SST142078
71 WAVE WASHER 5806282 5806282 5806282
73 NSF DECAL DNSF DNSF DNSF
74 NUT, STOP, LOWER PLATEN NH51618 NH51618 NH51618
75 FUSE HOLDER 1 AMP MPPF708 MPPF708 MPPF708
76 FUSE BUSS 1 AMP MPPF701R MPPF701R MPPF701R
77 SCREW, PHILLIPS PAN 2-56 x 1/4 SP25614 SP25614 SP25614
A1 UPPER PLATEN WIRE ONLY 1101021100 1101021101 1101021101
A2 UPPER PLATEN COMPLETE ASSEMBLY 1101021200 1101021201 1101021201
A3 LOWER PLATEN ASSEMBLY 11015932200 11015932200 11015932200
A4 PINION GEAR ASSEMBLY 1109360A 1109360A 1109360A
A5 FEET, RUBBER (4 EACH) RF209 RF209 RF209

Warranty & Return Policy
Proluxe warrants all products manufactured by it against defects in workmanship or materials from the date of purchase for a period of
(1) year on parts and labor. This warranty applies to only equipment purchased and used in the United States. Warranty period
shall begin when equipment ships and will not exceed 90 days past the original shipment date. Warranty travel shall only
be covered for 60 miles.
ALL WARRANTY SERVICE CALLS MUST BE APPROVED BY PROLUXE. IF THIS PROCEDURE IS NOT FOLLOWED,
WARRANTY SERVICE WILL NOT BE COVERED. WARRANTY SERVICE WILL BE PAID ON STRAIGHT TIME, OVERTIME WILL
NOT BE COVERED.
Exclusions:
1. WOOD / GAS FIRED OVENS: PROLUXE warranty applies to the main body of the oven being steel / refractory and insulation shall
be free from defects in materials and workmanship for a period of four years from the date of purchase. The gas equipment shall be
free from defects in materials and workmanship for a period of one (1) year
from the date of purchase. This warranty excludes the tandoori and home oven. Lifetime warranty against cracks on oven floor.
2. TANDOORI & HOME OVENS: PROLUXE warrants the Tandoori & Home Oven including gas equipment shall be free from defects
in materials and workmanship for a period of one (1) year from the date of purchase.
3. Air compressors are excluded from this warranty, but PROLUXE may act as a warranty expeditor in certain instances regarding
these compressors. The air compressor manufacturer provides a limited warranty
and a copy of this warranty is furnished with all compressors sold by PROLUXE. For prompt handling of compressor warranty claims
the instructions of the compressor manufacturer must be adhered to.
4. Equipment built to special order as well as accessories are not returnable unless defective within the terms of this warranty.
5. In no event shall PROLUXE be liable for consequential damages arising out of the failure of any of its products if operated
improperly or caused by normal wear or damage by operator abuse.
6. BC2325 pedestal warranty disclaimer: Pedestals shall only be covered under warranty if they have been cleaned using the factory
approved cleaning method. cracked or damaged pedestals must be inspected by the factory before warranty is authorized.
Returned Merchandise Policy:
Should it become necessary to return any of the company’s products, the following instructions must be adhered to: First,
contact our customer service department for approval and a return authorization number. Please have the serial number
of your item available at that time. All merchandise must be shipped freight prepaid by customer or service agency.
Subject to the inspection of the product by the company, a restocking charge of 20% of the Net purchased price paid to
PROLUXE will be assessed. Merchandise may not be returned for credit without prior written approval of PROLUXE. Collect shipments
will not be accepted. No returns after 60 days of original shipment date on machines. Purchased parts may not be returned after 30
days.
If upon inspection by PROLUXE or its authorized agent it is determined the equipment has not been used in an appropriate manner,
has been modified, or has not been properly maintained, or has been subject to misuse,
misapplication, neglect, abuse, accident, unauthorized modification, damage during transit, delivery, fire, flood, act or war,
riot or act of God, then this warranty shall be deemed null and void.
Terms & Conditions:
1. Prices indicated in the PRICE LIST are suggested retail prices and are shown in U.S. DOLLARS.
2. Terms of Payment: 1% 10 days, NET 30 days.
3. NEW ACCOUNTS: Satisfactory credit information must be provided before open account status can be extended.
Unless agreed otherwise, all shipments will be made C.O.D., CASH IN ADVANCE.
4. PRICING: Prices, specifications, model numbers, capacities and accessories are subject to change without notice.
5. FREIGHT / ROUTING: Method of shipment will be determined by PROLUXE unless otherwise
advised by PURCHASER.
6. DAMAGED CLAIMS: All merchandise shipped at purchaser’s risk. Inspection must be made by purchaser at time
goods are received. If goods are damaged, the PURCHASER shall request that the agent of the transportation
company make a written notation on the proper shipping documents immediately and then file a claim for damage.
GOODS DAMAGED IN SHIPMENT ARE NOT RETURNABLE.
7. RETURNS: Machines may not be returned after 60 days. Purchased parts may not be returned after 30 days. A
restocking fee of 20% will be assessed on non-warranty returns.
8. TAXES: Prices indicated herein DO NOT include State, Federal, Local or foreign taxes or duties, nor do they include
fees, permits, insurance or other levies, all of which are the responsibility of the purchaser.
9. All orders are subject to acceptance by PROLUXE.
10. Possession of this price list shall not be considered an offer to sell.