DozzyCozy AirCozy User manual
2
Tips for first-time users
1. AirCozy smart pillow is a product everyone dreams of but never
actually had. One of a kind, AirCozy provides the most ergonomic
height for healthy sleep whether you sleep on your back or on
your side. Using a pillow that is too high for sleeping on your back
and too low for sleeping on your side can cause damage to the
flexibility of your shoulders, neck, arm and back.
2. It is common for some first-time users may not use to the new
invented pillow when sleeping on their back or side because they
are not yet used to the pillow height of intelligent ergonomics
features of this product.
3. The Product provides suitable for personal physiology needs and
comfort, or when you want to change the pillow height due to
physiological condition at the time, you can adjust the back
sleeping knob located at the bottom cover of the main unit and
the side sleeping knob located next to fine-tune the height (refer
to section 7 on the user manual for instruction).
4. Please read the above information carefully to help you adapt
quickly to AirCozy’s unique functions and design, giving you the
best quality of sleep and assurance of health.
5. AirCozy smart pillow interactively and automatically adjusts its
height according to your sleeping position. During adjustment, the
pillow will make some slight sound, which is perfectly normal (note:
the sound will vary depending on the individual). For light sleepers or
those who do not sleep well, the AirCozy Premium is
recommended as it has a built-in sleep hypnosis function. You may
choose white noise or Bluetooth music to increase your deep sleep
time and improve your sleep quality.
3
Table of Contents
1. Accessories................................................................................. 4
2. Setting up & precautions............................................................ 7
3. Going to sleep .......................................................................... 10
4. AirCozy Semi-wearable device ................................................. 13
5. AirCozy Remote........................................................................ 15
6. Resetting pairing for Semi-wearable device & remote ........... 17
7. Height adjustment for side/ back sleeping position ................. 18
8. Disassembling & cleaning......................................................... 19
9. Troubleshooting ....................................................................... 20
10. Caution ................................................................................... 21
4
1. Accessories (refer to diagram of accessories)
A. Pillow: Includes (Place A3 memory foam, A4 elastic pad and A5
main unit in A2 inner pillow case first, and then place A2 inner
pillow case in A1 washable pillow case):
A1.Washable pillow case
A2.Inner pillow case
A3.Memory foam
A4.Elastic pad
A5.Main unit (A6 power management box is connected to
back of main unit)
B. Adaptor
C. AirCozy Semi-wearable device
D. Rear bumper (※Optional; sold separately)
E. AirCozy Remote (※this is not included in AirCozy Classic_N_VA)
F. Belt (※Optional; sold separately)
G. Short pajamas pants (with a tiny pocket for semi-wearable device)
H. Long pajamas pants (with a tiny pocket for semi-wearable device)
5
※Product model description:
Differences in function
AirCozy Classic_N_VA
AirCozy Premium_N_VA
Responsively and automatically
adjusting in height
lifting/dropping
✔
✔
Remote (includes Bluetooth
music playback, timer, white
noise, and etc.)
✘
✔
6
Diagram of accessories:
7
2. Setting up & precautions
2.1 Insert B adaptor plug into your wall power outlets at home.
Connect B adaptor’s circular connector to A6 power management
box’s socket, and then place C Semi-wearable device on A6
power management box to charge.
2.2 Place A pillow’s outlet next to the headboard.
2.3 If user’s headboard has a protruding cushion, the D rear bumper
(Optional; sold separately) should be placed between the A
pillow and headboard to prevent the A pillow from rubbing
against the headboard, affecting the height lifting/dropping
function. If user’s headboard does not have a protruding cushion,
the D rear bumper does not need to be used.
8
2.4 Before using AirCozy for the first time, place C semi-wearable
device on A6 power management box to charge. It should be in
charging mode all the time when not using it. After it is fully
charged, the green indicator light on the semi-wearable device
will stop flashing (It is recommended to charge every day).
2.5 Press the circular button on the side of the A6 power
management box’s charger to turn on or off the adaptor for the
pillow. On/off status is shown by indicator light; the blue LED
indicates that the power is on and when the LED indicator light is
off indicating that the power is off.
2.6 Once the B adaptor is connected, pressing the A6 power
management box’s button to turn off the power. By turning the
power off here will not affect the charging function.
9
2.7 After turning on power of the A pillow, the A pillow will
automatically initiate testing of the height adjustment and be
ready in standby mode.
2.8 Bluetooth is used for signal transmission between A6 power
management box, C semi-wearable device and E remote. Pairing
had been done before.
2.9 The A pillow detects sleeping position using the C semi-wearable
device worn by the user. When a person sleeps on his/her back,
the A pillow will automatically adjust to a height suitable for back
sleeping; when a person sleeps on his/her side, the A pillow will
automatically adjust to a height suitable for side sleeping.
2.10 When the sleeping position is between your back and your side,
the pillow may not change its height due to the false position or
false angle for detection.
10
3. Going to sleep
3.1 Press the circular button on the A6 power management box and
the button on the C semi-wearable device to turn on power for
the A pillow and C semi-wearable device, and get them into
standby mode.
3.2 Ways to wear the C semi-wearable device (note: select an option
depending on your need; the button on C semi-wearable device must be
pointed toward your head) :
3.2.1 Place on the F belt (Optional; sold separately): Place the
C semi-wearable device in the specially designed pocket
on the F belt, adjust the F belt’s tightness, and wear it
comfortably around your waist.
3.2.2 Place on G short pajamas pants (or H long pajamas pants)
provided: Put on the G short pajamas pants (or H long
pajamas pants) as needed, and place the C
semi-wearable device in the specially designed pocket at
the front of the pants.
11
3.3 Before each use, it is recommended to lie down on your back
after wearing the C semi-wearable device correctly. Place the C
semi-wearable device against your body and as near the midline
of your body as possible for correct sleeping position detection.
The button on the C semi-wearable device must be pointing at
your head. Press and hold the button for one second; when you
hear two beeps, the C semi-wearable device has done the
horizontal calibration.
3.4 After completing calibration for the C semi-wearable device, you
can now enjoy the smart body-responsive auto-adjustable pillow.
3.5 When you are sleeping on your back, the A pillow will
automatically drop its height; and when you are sleeping on your
12
side, the A pillow will automatically lift its height.
13
4. AirCozy Semi-wearable device
4.1 The C semi-wearable device has a sleeping position detection
function. It takes 4~10 seconds for detection to complete before
the pillow starts to adjust to an appropriate height.
4.2 Every time you get out of bed, you should press the circular
button on A6 power management box to turn power off for the A
pillow. You do not need to turn the C semi-wearable device
power off instead just place the C semi-wearable device on the
A6 power management box to charge.
4.3 The C semi-wearable device battery can last for 3 ~ 4 days once it
is fully charged.
4.3.1 The green LED blinks when charging. When it is fully
charged, the LED indicator will be off automatically (note:
it is normal for the green LED indicator to blink intermittently).
4.3.2 When using for the first time or when the LED indicator is
completely off, the battery is completely drained and the
semi-wearable device will be automatically turned off.
When this happens, charging the C semi-wearable device
will not make the green LED indicator to blink and the
14
semi-wearable device can be turned on after
approximately 2~4 hours of charging it.
4.3.3 Charging indicator: Red light flashing.
4.4 Functions of C semi-wearable device’s button:
4.4.1 Turn on: Press and hold for 2 seconds until green LED
indicator is on, and then blue LED indicator will pulsate
slowly.
4.4.2 Turn off: Press and hold for 2 seconds until green LED
indicator is on, and release the button.
4.4.3 Horizontal Calibration: Refer to 3.3.
15
5. AirCozy Remote (not included in AirCozy Classic)
※AirCozy Premium※
5.1 Multifunction button:
E1 Power button: Press and hold for 2 seconds to turn on or off
the remote.
5.1.1 On/off mode: Press and hold for 2 seconds. When blue
LED indicator is on, release hold to turn power on (note: if
you do not release your hold when blue LED indicator is on, it will
enter the pairing mode).
5.1.2 Power-saving mode: If you do not use the remote for 30
seconds, it enters the power-saving mode and all
indicator lights will be off (note: when this happens, the
remote will not be able to function until you wake it up again).
5.1.3 Wake-up mode: Press the power button shortly again to
display all the LED indicator lights to show the status of
functions buttons (note: the remote is on and functional).
5.2 [ AirCozy Premium ]functions:
16
5.2.1 E2 Mobile phone Bluetooth music button: (this function
is not available for AirCozy Classic)
-Start Bluetooth function using E remote (note: press E2
mobile phone Bluetooth music button);
-Search “AirCozy Music” in mobile phone for Bluetooth
connection;
-Start playing your favorite music.
5.2.2 E3 Timer button: Press timer cycle setting; choose from
30 minutes, 1 hour, 2 hours or 3 hours.
5.2.3 E4, E5 Volume button: “-” is for decreasing sound volume
and “+” is for increasing sound volume; you may use
short or long button press.
5.2.4 E6 Height of side-sleeping fine-tune button: If you want
to slightly increase the lifting height of the pillow, you can
press this button to slightly increase the lifting height of
the A pillow.
5.2.5 E7 White noise button: The A pillow provides five types
of nature sounds for sleep aid. The different nature
sounds can be changed and selected with button press.
There are five nature sounds in a loop and pressing the
sixth time will turn off the function of white noise.
17
6. Resetting pairing for Semi-wearable device & remote
6.1 Bluetooth pairing has been done before; reconnecting is
automatic after changing battery or turning on and off.
6.2 Resetting pairing for semi-wearable device and remote:
(note: Only one device can be paired each time; the same steps must be
repeated to pair the next device)：
6.2.1 First of all, to use a SIM card ejector pin or similar sharp
object to press the small hole in the A6 power
management box. When you hear the beep sound, you
can begin the pairing progress.
6.2.2 Afterwards, long press the C semi-wearable device
button until the C semi-wearable device’s blue LED
indicator light blinks quickly and then you will hear a long
deep sound. Pairing is completed when C semi-wearable
device’s blue LED indicator light turn to blink slowly.
6.2.3 Long press the E remote’s E1 power button until the E
remote’s blue LED indicator light blinks. Pairing is
completed when you hear a long beep sound.
18
7. Height adjustment for side/ back sleeping position
7.1 You may set your preferred height for side sleeping position
according to the firmness of your mattress. Take out the A5 main
unit and adjustment handle tool as the following diagram, then
turn the two “side-sleeping height adjustment knobs” behind
the lower part of the unit to fine tune the pillow’s height for side
sleeping. Turning the arrow on the knobs all the way to H
increases the height and turning the arrow on the knobs all the
way to L decreases the height; but you will not be able to leave
the knobs to the position in between H and L.
7.2 You may set your preferred height for back sleeping according to
the firmness of your mattress. Take out the A5 main unit and
adjustment handle tool as the following diagram, then turn the
two “back-sleeping height adjustment knobs” behind the upper
part of the unit to fine tune the pillow’s height for back sleeping.
Tightening the knobs clockwise to H increases the height and
tightening the knobs anticlockwise to L to decreases the height.
19
8. Disassembling & cleaning
8.1 You may unzip the A1 washable pillow case and remove it to
clean it.
8.2 It is recommended to vacuum-clean the A2 inner pillow case and
A3 memory foam, or air dry them in a shady place.
20
9. Troubleshooting
※When it is not functioning:
9.1 Check if power cable is plugged properly and all switches are on.
9.2 Check if the pillow will automatically test height adjustment
(lifting and dropping the height) at start-up.
9.3 Check if C semi-wearable device is fully charged.
9.4 Check if C semi-wearable device’s power is on.
9.5 If the pillow is not working, reset and pair the semi-wearable
device and remote (note: refer to point 6).
9.6 If all the above do not solve the problem, please contact the
seller or our company. Do not disassemble and repair on your
own as this may affect your warranty.
This manual suits for next models
2
Table of contents
