DQE MC5032 User manual

SAVE THESE INSTRUCTIONS FOR IMPORTANT OPERATING, PARTS, AND MAINTENANCE INFORMATION
PAGE 1
Heavy Duty Privacy Screen MC5032 Assembly Instructions
A. Remove, inspect, and count all parts (see Parts List below).
B. Connect a Leg (#1) to each end of the Lower Cross Member (#2).
C. Unroll and unfold Screen Assembly (#3).
D. Insert top end of each Side Pole (#4) into elbows of Upper Cross Member (#5).
E. Stand up screen section and smooth loose fabric down side poles.
F. Insert bottom end of each Side Pole (#4) into Lower Cross Member (#2).
G. Sandbags (not included) may be placed on Legs or hung over Lower Cross
Member near Side Poles.
Parts List Replacement parts are available, contact DQE to order.
PART NAME QTY PART NUMBER
1. 24” Legs 2 MCPT50321
2. Lower Cross Member 1 MCPT50322
3. Vinyl Fabric Screen 1 MCPT50323
4. Side Pole 2 MCPT50324
5. Upper Cross Member 1 MCPT50325
6. Canvas Carry Bag 1 BAGHDSCREEN
www.dqeready.com | p. 800-355-4628 | f. 317-295-9822 | [e-mail]
2
3
4
5
1

SAVE THESE INSTRUCTIONS FOR IMPORTANT OPERATING, PARTS, AND MAINTENANCE INFORMATION
PAGE 2
Heavy Duty Privacy Screen MC5032
A. After use, the screen and frame should be fully decontaminated using your
standard operating procedures and in full compliance with state and federal
regulations. Allow product to completely dry.
B. Disconnect each Side Pole (#4) from Lower Cross Member (#2).
C. Place Screen Assembly (#3) flat on the ground and disconnect each Side
Pole (#4) from Upper Cross Member (#5).
D. Swing the bottom end of one Side Pole up to the opposite end of the Upper
Cross Member.
E. Repeat last step with other Side Pole. The screen will be in a triangle shape.
F. Disconnect Legs from Lower Cross Member. Lay Lower Cross Member and
Legs beside Side Poles.
G. By rolling together, wrap all frame pieces in screen material.
H. Insert bundled screen roll with instruction sheet into Canvas Carry Bag.
www.dqeready.com | p. 800-355-4628 | f. 317-295-9822 | [e-mail]
Disassembly & Storage