Dr.Dabber Boost Black Edition User manual

Boost: Black Edition User Manual
(https://cdn.shopify.com/s/files/1/1102/6350/files/manual-boost-black-drdabber.pdf?9154217086700337490)
Safety Information
Use sensibly. Dr. Dabber products are intended for use by persons of legal smoking age. These products are not
suitable for children, women who are pregnant or breastfeeding, or persons with heart disease, high blood
pressure, hypertension or diabetes. These products should not be used in conjunction with medication for
depression or asthma. Discontinue use and consult a physician immediately if you experience symptoms such as
nausea, vomiting, dizziness, diarrhea, weakness, rapid heartbeat or hypertension.
What’s in the Box
Boost: Black Edition eRig
Glass Water Attachment
XL Domeless Titanium Nail (Threaded)
XL Ceramic Nail (Threaded)
XL Quartz Nail (Threaded)
Magnetic Carb Cap
Magnetic Loading Tool

Medical Grade SiliconeStorage Container x2
Micro USB Charging Cable
Limited Edition Dr. Dabber Keychain
Warranty Information
Register your Dr. Dabber product today to activate your warranty and receive helpful tips. This unit is under a one
year Warranty on electronic components & battery. Visit DrDabber.com/Register to get started!
Learning about your Boost
1. Use with caution. Must be 21 years of age or older to operate.
2. The nail becomes extremely hot. Do not touch once powered on.
3. Do not expose the device to direct sunlight.
4. Do not attempt to use the device without the glass attachment in place.
5. Do not attempt to place the device down on a surface without the base. The base is included to ensure proper
weight distribution and to avoid damage to the glass attachment.
6. When the battery is low, indicator light will flash.
7. The light on the power button will flash 3 times to indicate a connection issue.
8. Charging: Charge device fully before use. The power button shows a purple light when the device is being
charged.
9. Titanium Nail: Press the power button 3 times to heat titanium nail. The unit will begin with white light and
change toblue light after 25 seconds indicating it is ready to use (nail will continue heating for 20 seconds before
cutoff) • Temperature reaches 515°F after 25 seconds • Temperature reaches 610°F after 45 seconds
10. Ceramic/Quartz Nail: Press the power button 5 times to heat ceramic/quartz nail. The unit will begin with blue
light and change to white light after 40 seconds indicating it is ready to use (nail will continue heating for 20
seconds before cutoff) • Temperature reaches 520°F after 40 seconds • Temperature reaches 600°F after 60
seconds
11. Do not heat the device more than 3 cycles continuously to avoid bodily harm or injury.
12. Do not use or charge in a motor vehicle.
Boost Anatomy

HOW TO USE YOUR BOOST
1. Remove glass from unit and load from the top with water.
2. Click button to turn device on
-3 times for titanium nail
-5 times for ceramic/quartz nail
3. Load product on tip of tool
4. Once light changes color (Approx 30 seconds), touch tip of the tool to nail and begin to inhale through glass
mouthpiece.
5. Once all product has melted off of tool, flip tool around and place carb cap on top of the nail to increase vapor
density. (Generally 3-4 seconds)
CLEANING YOUR GLASS ATTACHMENT
To clean glass attachment, first remove the glass attachment from the eRig, then slowly pour 91% isopropyl
alcohol, or higher, into the mouthpiece until the unit is about 1/4 full. Shake the attachment gently until clean. To
rinse out the alcohol, pour water into the top (mouthpiece) until all alcohol is flushed out of the bottom of the
attachment. To remove all water from device, blow through mouthpiece and shake gently.

SWAPPING OUT YOUR NAIL
WARNING: DO NOT ATTEMPT TO REMOVE NAIL WHEN HOT. REMOVE NAIL CAREFULLY WITHOUT BENDING
OR TWISTING THE CERAMIC ELEMENT.
1.Turn nail clockwise to secure nail.
2.Turn nail counter clockwise to remove nail.
SWAPPING OUT YOUR CERAMIC ROD
WARNING: DO NOT ATTEMPT TO REMOVE CERAMIC ELEMENT WHEN HOT.
1.Pull up vertically on ceramic element to remove.
2.Push down on ceramic element to secure gold pins in place.

CHARGING YOUR DR. DABBER BOOST: BLACK
USB Port Connects to universal USB outlets.
Connecting Adapter Charge device fully before use. The power button shows a purple light when the device is
being charged. Light will turn green when fully charged. Due to the size of the battery, it is recommended to charge
6-8 hours or use an AC adapter (Not Included) to speed up charging time.
Support Line 1(855) 362-3227 (#) Support Email: [e-mail]
For helpful tips and trick as well as all the latest accessories, head over to www.drdabber.com
(http://www.drdabber.com/)

© Dr Dabber (https://www.drdabber.com/) 2019. Powered by Help Scout (https://www.helpscout.com/knowledge-base/?
utm_source=docs&utm_medium=footerlink&utm_campaign=Docs+Branding)
Last updated on August 18, 2019
(https://cdn.shopify.com/s/files/1/1102/6350/files/manual-boost-black-drdabber.pdf?9154217086700337490)
Did this answer your question?
 Still need help? Contact Us (/contact)

www.smokecartel.com
Online Headshop