Draytek Vigor2500 series User manual

2.2 Right click on the icon Local Area Connection and then select
Properties.
2.3 Select Internet Protocol (TCP/IP) and click Properties.
2.4 Select Obtain an IP Address automatically.
2.5 Select Using the following DNS server addresses and enter the
following settings:
Primary DNS Server 203.12.160.35
Secondary DNS Server 203.12.160.36
Click OK to save settings.
Contents
1. Equipment Checklist
2. Modem Configuration
1. Equipment Checklist
Please ensure that you have the following equipment:
•Vigor2500 Series ADSL Router
•Network Card for connection to the computer
•Ethernet Cable (blue) for connection to a computer or Hub.
• AC power supply adaptor.
• ADSL Line cable (RJ-11).
• Vigor2500 Product Documentation & Installation CD
Please refer to the diagrams shown on the Quick Reference guide and
below, in order to connect the Vigor-2500 Modem with your phone
outlets and connect filter to your Telephone.
2. Modem Configuration
Please connect your modem to the computer for configuration of your
ADSL Connection and turn power on.
2.1 Click Start -> Settings -> Network Connections on your taskbar.
Vigor-2500 (Bridged) Setup
Instructions for Windows 2000 & Windows XP

IP Address: Customer IP
Subnet Mask: 255.255.255.252
Gateway IP Address: Gateway IP
2.11 Select Using Current Configuration and click OK.
2.12The Modem will automatically reboot and then your Modem
Configuration will be complete.
2.13Click Start -> Settings -> Control Panel -> Network
Connections.
2.14Right Click Local Area Connection.
2.6 Enter http://192.168.1.1 into a browser (eg, Internet Explorer,
Netscape, etc). A Login prompt will then ask you for your
Username and Password, but leave it empty and click OK.
2.7 Click Internet Access Setup.
2.8 Click MPoA(RFC1483/2684).
2.9 Enter the following DSL Modem Settings:
VPI: 8
VCI: 35
Modulation G-DMT
2.10Select Specify an IP Address, and enter the following settings:

Double-click Internet Protocol (TCP/IP).
2.15 Select Use the following IP Address and enter the
following settings:
IP Address: CUSTOMER IP from the Info sheet
Subnet Mask: 255.255.255.252
Default Gateway: GATEWAY IP from the Info sheet
Select Using the following DNS server addresses and
enter the following settings:
Primary DNS Server 203.12.160.35
Secondary DNS Server 203.12.160.36
www.tpg.com.au
Support Information
For any installation, configuration or billing enquiries,please call:
1300 360 855
Or you can email your queries to [e-mail]
Or visit www.tpg.com.au/helpdesk for further information.
The Help Desk service is available:
Monday to Friday 8:00am - Midnight
Weekends 9:00am - Midnight
Public holidays 10:00am - 4:00pm
For modem-related problems or suspected faulty modems please call:
D-Link Australia – 1800 177 100
2.16The IP setting will now be saved on your computer & you can
begin browsing.