Draytek Vigor3200 Series User manual

Vigor3200 Series Quick Start Guide
i

Vigor3200 Series Quick Start Guide ii
Vigor3200 Series
Multi-WAN Security Router
Quick Start Guide
Version: 1.0
Firmware Version: V3.3.6_RC5
Date: 09/10/2010

Vigor3200 Series Quick Start Guide
i
Copyright Information
Copyright
Declarations
Copyright 2010 All rights reserved. This publication contains information that is
protected by copyright. No part may be reproduced, transmitted, transcribed,
stored in a retrieval system, or translated into any language without written
permission from the copyright holders.
Trademarks
The following trademarks are used in this document:
zMicrosoft is a registered trademark of Microsoft Corp.
zWindows, Windows 95, 98, Me, NT, 2000, XP and Explorer are
trademarks of Microsoft Corp.
zApple and Mac OS are registered trademarks of Apple Computer Inc.
zOther products may be trademarks or registered trademarks of their
respective manufacturers.
Safety Instructions and Approval
Safety
Instructions
zRead the installation guide thoroughly before you set up the router.
zThe router is a complicated electronic unit that may be repaired only be
authorized and qualified personnel. Do not try to open or repair the router
yourself.
zDo not place the router in a damp or humid place, e.g. a bathroom.
zDo not stack the routers.
zThe router should be used in a sheltered area, within a temperature range
of +5 to +40 Celsius.
zDo not expose the router to direct sunlight or other heat sources. The
housing and electronic components may be damaged by direct sunlight or
heat sources.
zDo not deploy the cable for LAN connection outdoor to prevent electronic
shock hazards.
zKeep the package out of reach of children.
zWhen you want to dispose of the router, please follow local regulations on
conservation of the environment.
Warranty
We warrant to the original end user (purchaser) that the router will be free from
any defects in workmanship or materials for a period of two (2) years from the
date of purchase from the dealer. Please keep your purchase receipt in a safe
place as it serves as proof of date of purchase. During the warranty period, and
upon proof of purchase, should the product have indications of failure due to
faulty workmanship and/or materials, we will, at our discretion, repair or replace
the defective products or components, without charge for either parts or labor, to
whatever extent we deem necessary tore-store the product to proper operating
condition. Any replacement will consist of a new or re-manufactured
functionally equivalent product of equal value, and will be offered solely at our
discretion. This warranty will not apply if the product is modified, misused,
tampered with, damaged by an act of God, or subjected to abnormal working
conditions. The warranty does not cover the bundled or licensed software of
other vendors. Defects which do not significantly affect the usability of the
product will not be covered by the warranty. We reserve the right to revise the
manual and online documentation and to make changes from time to time in the
contents hereof without obligation to notify any person of such revision or
changes.
Be a Registered
Owner Web registration is preferred. You can register your Vigor router via
http://www.draytek.com.
Firmware & Tools
Updates Due to the continuous evolution of DrayTek technology, all routers will be
regularly upgraded. Please consult the DrayTek web site for more information on
newest firmware, tools and documents.
http://www.draytek.com

Vigor3200 Series Quick Start Guide ii
European Community Declarations
Manufacturer: DrayTek Corp.
Address: No. 26, Fu Shing Road, HuKou County, HsinChu Industrial Park, Hsin-Chu, Taiwan 303
Product: Vigor3200 Series Router
DrayTek Corp. declares that Vigor3200 Series of routers are in compliance with the following essential
requirements and other relevant provisions of R&TTE Directive 1999/5/EEC.
The product conforms to the requirements of Electro-Magnetic Compatibility (EMC) Directive
2004/108/EEC by complying with the requirements set forth in EN55022/Class B and EN55024/Class B.
The product conforms to the requirements of Low Voltage (LVD) Directive 2006/95/EEC by complying
with the requirements set forth in EN60950-1.
Regulatory Information
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one of the following measures:
zReorient or relocate the receiving antenna.
zIncrease the separation between the equipment and receiver.
zConnect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
zConsult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device may accept any interference received, including interference that may cause undesired
operation.
http://www.draytek.com/user/AboutRegulatory.php
This product is designed for the 2.4GHz WLAN 1throughout the EC region and Switzerland. Please see the
user manual for the applicable networks on your product.

Vigor3200 Series Quick Start Guide
iii

Vigor3200 Series Quick Start Guide iv
T
Ta ab bl le e o of f C Co on nt te en nt ts s
1. Introduction........................................................................................................... 1
1.1 Panel Explanation ...................................................................................................................... 2
1.2.1 For Vigor3200 ............................................................................................................... 2
1.2.2 For Vigor3200n ............................................................................................................. 4
1.2 Package Content........................................................................................................................ 6
2. Installing Your Router........................................................................................... 7
2.1 Hardware Installation.................................................................................................................. 7
2.2 Printer Installation....................................................................................................................... 8
3. Configuring Web Pages ..................................................................................... 13
3.1 Accessing Web Page ............................................................................................................... 13
3.2 Basic Configuration.................................................................................................................. 14
3.3 Wireless Configuration............................................................................................................. 18
3.3.1 Basic Wireless LAN Concept...................................................................................... 18
3.3.2 General Setup.............................................................................................................19
3.3.3 Security Settings.........................................................................................................20
4. Trouble Shooting................................................................................................ 23
4.1 Checking If the Hardware Status Is OK or Not......................................................................... 23
4.2 Checking If the Network Connection Settings on Your Computer Is OK or Not ...................... 24
4.3 Pinging the Router from Your Computer.................................................................................. 26
4.4 Checking If the ISP Settings are OK or Not............................................................................. 27
4.5 Backing to Factory Default Setting If Necessary...................................................................... 28
4.6 Contacting Your Dealer ............................................................................................................ 29

Vigor3200 Series Quick Start Guide
v

Vigor3200 Series Quick Start Guide
1
1
1. . I In nt tr ro od du uc ct ti io on n
Vigor3200 Series is a broadband router. It integrates IP layer QoS, NAT
session/bandwidth management to help users control works well with large bandwidth.
By adopting hardware-based VPN platform and hardware encryption of AES/DES/3DES,
the router increases the performance of VPN greatly, and offers several protocols (such as
IPSec/PPTP/L2TP) with up to 32 VPN tunnels.
The object-based design used in SPI (Stateful Packet Inspection) firewall allows users to
set firewall policy with ease. CSM (Content Security Management) provides users control
and management in IM (Instant Messenger) and P2P (Peer to Peer) more efficiency than
before. By the way, DoS/DDoS prevention and URL/Web content filter strengthen the
security outside and control inside.
Object-based firewall is flexible and allows your network be safe. In addition, Vigor3200
Series supports USB interface for connecting USB printer to share printer or USB storage
device for sharing files, or for 3G WAN connection.
Vigor3200 Series provides two-level management to simplify the configuration of
network connection. The user mode allows user accessing into WEB interface via simple
configuration. However, if users want to have advanced configurations, they can access
into WEB interface through admin mode.

Vigor3200 Series Quick Start Guide 2
1
1. .1 1 P Pa an ne el l E Ex xp pl la an na at ti io on n
1
1. .2 2. .1 1 F Fo or r V Vi ig go or r3 32 20 00 0
LED Status Explanation
Blinking The router is powered on and running normally.ACT (Activity) Off The router is powered off.
On USB device is connected and ready for use.USB Blinking The data is transmitting.
On The DoS/DDoS function is active.DoS Blinking It will blink while detecting an attack.
VPN On The VPN tunnel is active.
On The WAN1 ~ WAN4 connection is ready.WAN1-4 Blinking It will blink while transmitting data.
CSM On The profile(s) of CSM (Content Security
Management) for IM/P2P, URL/Web Content Filter
application can be enabled from Firewall
>>General Setup. (Such profile must be
established under CSM menu).
On The port is connected.
Off The port is disconnected.
Left LED
(Green)
Blinking The data is transmitting.
On The port is connected with 1000Mbps.
WAN 1/2/3/4
Right LED
(Green) Off The port is disconnected with 100Mbps.
On The port is connected.
Off The port is disconnected.
Left LED
(Green)
Blinking The data is transmitting.
On The port is connected with 100Mbps.
DMZ
Right LED
(Green) Off The port is connected with 10Mbps.
On The port is connected.
Off The port is disconnected.
Left LED
(Green)
Blinking The data is transmitting.
On The port is connected with 1000Mbps.
LAN
Right LED
(Green) Off The port is disconnected with 100Mbps.

Vigor3200 Series Quick Start Guide
3
Interface Description
Factory Reset Restore the default settings. Usage: Turn on the router (ACT LED is blinking).
Press the hole and keep for more than 5 seconds. When you see the ACT LED
begins to blink rapidly than usual, release the button. Then the router will restart
with the factory default configuration.
WAN1- WAN4 Connecters for remote networked devices.
DMZ Connecter for local DMZ host.
LAN Connecter for local network devices.
USB Connecter for 3G Modem or printer.
PWR Connecter for a power adapter.
ON/OFF Power Switch.

Vigor3200 Series Quick Start Guide 4
1
1. .2 2. .2 2 F Fo or r V Vi ig go or r3 32 20 00 0n n
LED Status Explanation
Blinking The router is powered on and running normally.ACT (Activity) Off The router is powered off.
On USB device is connected and ready for use.USB Blinking The data is transmitting.
On Wireless access point is ready.
Blinking Ethernet packets are transmitting over wireless
LAN.
WLAN
Off The WLAN function is inactive.
VPN On The VPN tunnel is active.
On The WAN1 ~ WAN4 connection is ready.WAN1-4 Blinking It will blink while transmitting data.
CSM On The profile(s) of CSM (Content Security
Management) for IM/P2P, URL/Web Content Filter
application can be enabled from Firewall
>>General Setup. (Such profile must be
established under CSM menu).
On The port is connected.
Off The port is disconnected.
Left LED
(Green)
Blinking The data is transmitting.
On The port is connected with 1000Mbps.
WAN 1/2/3/4
Right LED
(Green) Off The port is disconnected with 100Mbps.
On The port is connected.
Off The port is disconnected.
Left LED
(Green)
Blinking The data is transmitting.
On The port is connected with 100Mbps.
DMZ
Right LED
(Green) Off The port is connected with 10Mbps.
On The port is connected.
Off The port is disconnected.
Left LED
(Green)
Blinking The data is transmitting.
On The port is connected with 1000Mbps.
LAN
Right LED
(Green) Off The port is disconnected with 100Mbps.

Vigor3200 Series Quick Start Guide
5
Interface Description
Wireless LAN
ON/OFF/WPS Press "Wireless LAN ON/OFF/WPS" button once to wait for client device making network connection through WPS.
Press "Wireless LAN ON/OFF/WPS" button twice to enable (WLAN
LED on) or disable (WLAN LED off) wireless connection.
Factory Reset Restore the default settings. Usage: Turn on the router (ACT LED is
blinking). Press the hole and keep for more than 5 seconds. When you see
the ACT LED begins to blink rapidly than usual, release the button. Then
the router will restart with the factory default configuration.
WAN1- WAN4 Connecters for remote networked devices.
DMZ Connecter for local DMZ host.
LAN Connecter for local network devices.
USB Connecter for 3G Modem or printer.
PWR Connecter for a power adapter.
ON/OFF Power Switch.

Vigor3200 Series Quick Start Guide 6
1
1. .2 2 P Pa ac ck ka ag ge e C Co on nt te en nt t
nQuick Start Guide oCD
pRJ-45 Cable (Ethernet) qAntenna (n models)
rThe type of the power adapter depends on the country that the router will be
installed:
UK-type Power Adapter EU-type Power Adapter
USA/Taiwan-type Power Adapter AU/NZ-type Power Adapter
* The maximum power consumption is 20 Watt.

Vigor3200 Series Quick Start Guide
7
2
2. . I In ns st ta al ll li in ng g Y Yo ou ur r R Ro ou ut te er r
This section will guide you to install the router through hardware connection and
configure the router’s settings through web browser.
2
2. .1 1 H Ha ar rd dw wa ar re e I In ns st ta al ll la at ti io on n
Before starting to configure the router, you have to connect your devices correctly.
1. Connect the cable Modem/DSL Modem/Media Converter to any WAN port of router
with Ethernet cable (RJ-45).
2. Connect one end of an Ethernet cable (RJ-45) to the LAN port of the router and the
other end of the cable (RJ-45) into the Ethernet port on your computer. Or, use a
switch to connect Vigor router and computer(s).
3. Connect one end of the power adapter to the router’s power port on the rear panel,
and the other side into a wall outlet.
4. Power on the device by pressing down the power switch on the rear panel.
5. The system starts to initiate. After completing the system test, the ACT LED will
light up and start blinking.
(For the detailed information of LED status, please refer to section 1.1.)

Vigor3200 Series Quick Start Guide 8
2
2. .2 2 P Pr ri in nt te er r I In ns st ta al ll la at ti io on n
You can install a printer onto the router for sharing printing. All the PCs connected this
router can print documents via the router. The example provided here is made based on
Windows XP/2000. For Windows 98/SE/Vista, please visit www.draytek.com.
Before using it, please follow the steps below to configure settings for connected
computers (or wireless clients).
1. Connect the printer with the router through USB port.
2. Open Start->Settings-> Printer and Faxes.

Vigor3200 Series Quick Start Guide
9
3. Open File->Add a New Computer. A welcome dialog will appear. Please click
Next.
4. Click Local printer attached to this computer and click Next.
5. In this dialog, choose Create a new port Type of port and use the drop down list to
select Standard TCP/IP Port. Click Next.

Vigor3200 Series Quick Start Guide 10
6. In the following dialog, type 192.168.1.1 (router’s LAN IP) in the field of Printer
Name or IP Address and type IP_192.168.1.1 as the port name. Then, click Next.
7. Click Standard and choose Generic Network Card.
8. Then, in the following dialog, click Finish.

Vigor3200 Series Quick Start Guide
11
9. Now, your system will ask you to choose right name of the printer that you installed
onto the router. Such step can make correct driver loaded onto your PC. When you
finish the selection, click Next.
10. For the final stage, you need to go back to Control Panel-> Printers and edit the
property of the new printer you have added.
11. Select "LPR" on Protocol, type p1 (number 1) as Queue Name. Then click OK.
Next please refer to the red rectangle for choosing the correct protocol and LPR
name.

Vigor3200 Series Quick Start Guide 12
The printer can be used for printing now. Most of the printers with different
manufacturers are compatible with vigor router.
Note 1: Some printers with the fax/scanning or other additional functions are not
supported. If you do not know whether your printer is supported or not, please
visit www.draytek.com to find out the printer list. Open Support >FAQ; find out
the link of Printer Server and click it; then click the What types of printers are
compatible with Vigor router? link.
Note 2: Vigor router supports printing request from computers via the LAN port
but not WAN port.