Dream On Me HYGGE User manual

Read all instructions before
assembling and using product.
IMPORTANT - Keep instructions for
future use. 0622R1-786
Owner’s Manual
HYGGE
5-in-1 Convertible Crib
Scan the QR code to register your product
https://dreamonme.com/customercare/registration/

SAFE SLEEP TIPS
Adult Assembly
Required.
DO NOT use the
product if it is
damaged, broken,
and/or components are
missing or broken.
To protect your parts
during assembly,
please place them on a
soft surface.
Contact Dream On
Me in case of any
assistance needed.
Small parts may
present choking
hazard prior to
assembly.
Please read the
instructions
thoroughly. Identify all
parts & hardware.
Do Not Use Power
Drills or Drivers.
To clean surface, use
only water on a damp
cloth. Do not use
window cleaner or
cleaning abrasive as it
will scratch the surface
and could damage the
protective coating.
For a Safe and
comfortable Sleep
experience, we
suggest using Dream
On Me Greenguard
Gold Certified
Full-Size Mattress.
0-6
2www.dreamonme.com/help

…. for choosing Dream On Me and congratulations on joining our family;
a family that has been transforming lives for over 30+ years!
We appreciate your feedback and wish you the very best in the
coming years with your new addition. If you have any questions
or concerns please don’t hesitate to reach out to us. One of our
trusted Customer Care representatives will be happy to assist you.
Thank you again for entrusting us to provide you with safe
and affordable baby products and accessories.
THANK YOU...
LIMITED WARRANTY:
• Dream On Me warrants its product to be free from defects in material and
workmanship and agrees to remedy any such defect.
• This warranty covers 1 year from the date of original purchase.
• This warranty is valid only upon presentation of proof of purchase.
• This is solely limited to the repair or replacement of defective furniture
components and no assembly labor is included.
• This warranty does not apply to any product which has been improperly
assembled, subjected to misuse or abuse or which has been altered or
repaired in any way.
• This warranty gives you specific legal rights and you may also have other
rights which vary from State to State.
www.dreamonme.com/help 3

www.dreamonme.com/help
4
WARNINGS
• FAILURE TO FOLLOW THESE WARNINGS AND ASSEMBLY INSTRUCTIONS COULD RESULT IN
SERIOUS INJURY OR DEATH.
• TO REDUCE THE RISK OF SIDS(SUDDEN INFANT DEATH SYNDROME), PEDIATRICIANS
RECOMMEND HEALTHY INFANTS BE PLACED ON THEIR BACKS TO SLEEP, UNLESS
OTHERWISE ADVISED BY YOUR PHYSICIAN.
• CHECK THIS PRODUCT FOR DAMAGED HARDWARE, LOOSE JOINTS, MISSING PARTS OR
SHARP EDGES BEFORE AND AFTER ASSEMBLY AND FREQUENTLY DURING USE.
• DO NOT USE THIS CRIB IF ANY PARTS ARE MISSING, DAMAGED OR BROKEN. CONTACT
DREAM ON ME - 1532 S. WASHINGTON AVE, PISCATAWAY, NJ 08854 FOR REPLACEMENT
PARTS.
• DO NOT USE A WATER MATTRESS WITH THIS CRIB.
• IF REFINISHING, USE A NON-TOXIC FINISH SPECIFIED FOR CHILDREN’S PRODUCTS.
STRANGULATION HAZARD:
• STRINGS CAUSE STRANGULATION! DO NOT PLACE ITEMS WITH A STRING AROUND A CHILD’S
NECK, SUCH AS HOOD STRINGS OR PACIFIER CORDS. DO NOT SUSPEND STRINGS OVER A
CRIB OR ATTACH STRINGS TO TOYS.
• TO HELP PREVENT STRANGULATION TIGHTEN ALL FASTENERS. A CHILD CAN TRAP PARTS OF
BODY OR CLOTHING ON LOOSE FASTENERS.
• DO NOT PLACE CRIB NEAR WINDOW WHERE CORDS FROM BLINDS OR DRAPES MAY
STRANGLE A CHILD.
• INFANTS CAN SUFFOCATE ON SOFT BEDDING.
• NEVER ADD A PILLOW, COMFORTER OR PADDING.
• NEVER PLACE ADDITIONAL PADDING UNDER INFANT.
• NEVER USE PLASTIC SHIPPING BAGS OR ANY PLASTIC FILM AS MATTRESS COVERS,
BECAUSE THEY CAN CAUSE SUFFOCATION.
• INFANTS CAN SUFFOCATE IN GAPS BETWEEN CRIB SIDES AND A MATTRESS THAT IS TOO
SMALL. ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27-1/4 IN (69 CM) BY 51-5/8
IN (131 CM), WITH A THICKNESS NOT EXCEEDING 6 IN (15CM) AND A MINIMUM THICKNESS
OF 4 IN (10 CM). THE DIMENSIONS OF THE MATTRESS SHALL BE TAKEN FROM SEAM TO
SEAM OR EDGE TO EDGE WHERE APPROPRIATE.
FALL HAZARD:
• WHEN CHILD IS ABLE TO PULL TO STANDING POSITION, SET MATTRESS TO LOWEST
POSITION AND REMOVE BUMPER PADS, LARGE TOYS AND OTHER OBJECTS THAT COULD
SERVE AS STEPS FOR CLIMBING OUT. AFTER RAISING SIDE, MAKE SURE LATCHES ARE
SECURE (DISREGARD FOR NON-DROP SIDE CRIB).
• DO NOT LEAVE CHILD IN CRIB WITH SIDES LOWERED. BE SURE SIDE IS IN RAISED AND
LOCKED POSITION WHENEVER CHILD IS IN CRIB (DISREGARD FOR NON-DROP SIDE CRIB).
• STOP USING CRIB WHEN CHILD BEGINS TO CLIMB OUT OR REACHES THE HEIGHT OF 35 IN
(89 CM).
• WHEN STORING CRIB USE CAUTION AS EXTREME CHANGES IN TEMPERATURE OR HUMIDITY
CAN COMPROMISE THE CRIB MAKING IT EXTREMELY DANGEROUS TO YOUR CHILD.
• USE CAUTION WHEN A VAPORIZER OR HUMIDIFIER IS IN USE. ALWAYS AIM VAPOR AWAY
FROM THE CRIB AS WELL AS ANY OTHER WOODEN FURNITURE. PROLONGED PERIODS OF
HUMIDITY IN STORAGE AS WELL AS IN THE HOME CAN COMPROMISE THE CRIB.
• AVOID USING VAPORIZERS AND HUMIDIFIERS FOR PROLONGED PERIODS OF TIME.
• FOLLOW WARNINGS ON ALL PRODUCTS IN CRIB.

www.dreamonme.com/help 5
WARNINGS (cont.)
• DO NOT USE THIS CRIB IF YOU CANNOT EXACTLY FOLLOW THE
ACCOMPANYING INSTRUCTIONS.
• DO NOT USE THIS CRIB FOR A CHILD WHO CAN CLIMB OUT OF IT OR WHO IS
TALLER THAN 90 CM.
• DO NOT PLACE IN OR NEAR THIS CRIB ANY CORD, STRAP OR SIMILAR ITEM
THAT COULD BECOME WRAPPED AROUND A CHILD’S NECK.
• DO NOT PLACE THIS CRIB NEAR A WINDOW OR A PATIO DOOR WHERE THE
CHILD COULD REACH THE CORD OF A BLIND OR CURTAIN AND BE STRANGLED.
• CHECK THIS CRIB REGULARLY BEFORE USING IT AND DO NOT USE IT IF ANY
PARTS ARE LOOSE OR MISSING OR IF THERE ARE ANY SIGNS OF DAMAGE. DO
NOT SUBSTITUTE PARTS. CONTACT THE MANUFACTURER IF REPLACEMENT
PARTS OR ADDITIONAL INSTRUCTIONS ARE NEEDED.
• USE A CRIB MATTRESS THAT IS NO THICKER THAN 15 CM AND IS OF SUCH A
SIZE THAT, WHEN IT IS PUSHED FIRMLY AGAINST ANY SIDE OF CRIB, IT DOES
NOT LEAVE A GAP OF MORE THAN 3 CM BETWEEN THE MATTRESS AND ANY
PART OF THE SIDES OF THE CRIB.
• CHILDREN CAN SUFFOCATE ON SOFT BEDDING. DO NOT PLACE PILLOWS,
COMFORTERS OR SOFT MATTRESS IN THIS CRIB.
WARNING

PARTS
www.dreamonme.com/help
6
If there are any missing parts, please contact Dream On Me before using the
product.
1Left Panel 2Right Panel
4Base Stretcher (x2)Stabilizer Bar (x2) 5Center Base Rail (x2)
6
Side Panels (x2)
3
Left Front and
Right Rear Feet
(x2)
7Right Front and
Left rear Feet (x2)
8Mattress Support
9

www.dreamonme.com/help 7
HARDWARE
If there are any missing parts, please contact Dream On Me before using the
product.
Bolt 3-3/4” (×4)
ABolt 2-5/8” (×4) B
Bolt 2” (×6)
CBolt 1-3/4” (×16) D
Wooden Dowel (×6)
FHalf Moon Washer (x12) GΦ4x30 mm
Metal Pin (x24)
H
Allen Key (x1)
J
Bolt 5/8”(x4)
E

www.dreamonme.com/help
8
(7)
(7)
(7)
(4)
(4)
(H)
(H)
(G) (D)
(4)
(8)
(8)
Bolt 1-3/4” (×4)
DHalf Moon Washer (x4)
GΦ4x30 mm Metal Pin (x8)
H
1
CRIB ASSEMBLY - FEET ASSEMBLY
1a. Place the parts on a soft surface before
assembly. Align the Left Feet (7) and the
Right Feet (8), respectively to the Center
Base Rail (6) as shown in the illustration.
1b. Place the Metal Pins (H) between the Left
Feet and Center Base Rail. Similarly,
place the Metal Pins between the Right
Feet and the Center Base Rail.
1c. Position the Half Moon Washer (G)
in the designated slots on the
Center Base Rail. Similarly,
attach the Bolts (D) in the
insertions provided on the
Center Base Rail, fixing
them to the Feet.
1d. Tighten the Bolts using the
Allen Key (J) provided.
Follow the above steps for
the second Center Base
Rail.
NOTE:
1. Do not overtighten the
bolts.

www.dreamonme.com/help 9
Bolt 1-3/4” (×4)
DHalf Moon Washer (x4)
GΦ4x30 mm Metal Pin (x8)
H
(7)
(5)
(5)
(5)
(7)
(H)
(H) (G) (D)
(8)
(8)
(8)
2
CRIB ASSEMBLY - BASE ASSEMBLY
2a. Align the assembled feet to the Base Stretcher (5).
Position the Metal Pins (H) between the four feet and
the Base Stretcher.
2b. Position the Half Moon Washers (G) in the
designated slots on the Base Stretcher (7). Similarly,
attach the Bolts (B) in the insertions provided on the
Base Stretcher, fixing them to the feet.
2c. Tighten the Bolts using the Allen Key (J) provided.

www.dreamonme.com/help
10
(A)
(A)
(A)
(A)
(2)
(1)
(4)
(4)
(4)
(F)
(F)
(F)
(A) (G)
(H)
(2)
(H)
Wooden Dowel (×3)
F
Half Moon
Washer (x4)
GΦ4x30 mm
Metal Pin (x8)
H
Bolt 3-3/4” (×4)
A
3
CRIB ASSEMBLY - STABILIZER BAR ASSEMBLY
3a. Align and arrange the Left Panel (1) and the Right Panel (2) to the Stabilizer
Bars (4) as shown in the illustration.
3b. Attach the Wooden Dowels in the insertions on the top of the Stabilizer Bar.
Position the Metal Pins (H) between the four ends of the Stabilizer Bar and
the Left and Right Panels.
3c. Position the Half Moon Washers (G)
in the designated slots on the
Stabilizer Bars. Similarly, attach the
Bolts (A) in the insertions on the
Stabilizer Bars, fixing them to the
Left and Right Panels of the crib.
3d. Tighten the Bolts using the Allen
Key (J) provided.