Dream On Me 628 User manual

1
Adult assembly required.
Small parts may present choking hazard prior to assembly.
Enclosed please find simple step-by-step instructions to help you
quickly assemble your products. Before you begin we recommend
that you following the steps below:
1. Please read the instructions thoroughly.
2. Identify all parts and hardware.
3. You will need the following tools:
Philips head screw driver
Flat head screw driver
Hammer
Do Not Use Power Drills or Drivers
To protect your parts during assembly please place them on a soft
surface.
To clean surface use only water on a damp cloth. Do not use
window cleaners or cleaning abrasives as it will scratch the surface
and could damage the protective coating.
ASSEMBLY INSTRUCTIONS
ITEM NO: 628
s
Please note that the warning sticker is placed on the cribs to keep parents and
caregivers informed it is a requirement by law under CPSC And ASTM.
We do apologize for any inconvenience this may cause you.
Dream On Me Inc.
Read all instructions BEFORE assembly and USE of product.
KEEP INSTRUCTIONS FOR FUTURE USE.
1532 S WASHINGTON AVE
PISCATAWAY TWP NJ 08854
OFFICE: 732-752-7220
CUSTOMER SERVICE: 732-366-1788

2

3
WARNING !
MADE IN CHINA
· FAILURE TO FOLLOW THESE WARNINGS AND THE ASSEMBLY INSTRUCTIONS
COULD RESULT IN SERIOUS INJURY OR DEATH.
· READ ALL INSTRUCTIONS BEFORE ASSEMBLING CRIB. KEEP INSTRUCTIONS
FOR FUTURE USE.
USE ONLY MATTRESS/PAD PROVIDED BY DREAM ON ME WHICH MUST BE AT
LEAST 37-3/4 IN.LONG BY 23-3/4 WIDE AND NOT MORE THAN 2 IN.THICK.
· CHECK THIS PRODUCT FOR DAMAGED HARDWARE, LOOSE JOINTS, MISSING
PARTS OR SHARP EDGES BEFORE AND AFTER ASSEMBLY.A FREQUENT CHECK
DAMAGED OR BROKEN.CONTACT DREAM ON ME INC.1532 S WASHINGTON AVE
PISCATAWAY TWP NJ 08854
FOR REPLACEMENT PARTS AND INSTRUCTIONAL
LITERATURE IF NEEDED.DO NOT SUBSTITUTE PARTS.
· TO REDUCE THE RISK OF SIDS, PEDIATRICIANS RECOMMEND HEALTHY INFANTS
BE PLACED ON THEIR BACKS TO SLEEP, OTHERWISE ADVISED BY YOUR
PHYSICIAN.
· STRINGS CAN CAUSE STRANGULATION! DO NOT PLACE ITEMS WITH A STRING
AROUND A CHILD’S
NECK,SUCH AS HOOD STRINGS OR PACIFIER CORDS.
DO NOT SUSPEND STRINGS OVER A CRIB OR ATTACH A
STRINGS TO TOYS.
· TO HELP PREVENT STRANGULATION TIGHTEN ALL FASTENERS. A CHILD CAN
TRAP PARTS OF THE BODY OR CLOTHING ON LOOSE FASTENERS.
· DO NOT PLACE CRIB NEAR WINDOWS WHERE CORDS FROM BLINDS OR DRAPS
MAY STRANGLE A CHILD.
· WHEN CHILD IS ABLE TO PULL TO A STANDING POSITION, SET MATTRESS TO THE
LOWEST POSITION AND REMOVE BUMPER PADS, LARGE TOYS AND OTHER
OBJECTS THAT COULD SERVE AS STEPS FOR CLIMBING OUT.
· WHEN CHILD IS ABLE TO CLIMB OUT OR REACH THE HEIGHT OF 35 IN.(89CM),
THE CRIB SHALL NO LONGER BE USED.
· DO NOT USE A WATER MATTRESS WITH THIS CRIB.
· IF REFINISHING, USE A NON-TOXIC FINISH SPECIFIED FOR CHILDREN'S
PRODUCTS.
· NEVER USE PLASTIC SHIPPING BAGS OR OTHER PLASTIC FILM AS MATTRESS
COVERS BECAUSE THEY CAN CAUSE SUFFOCATION.
· INFANTS CAN SUFFOCATE IN GAPS BETWEEN A MATTRESS TOO SMALL OR TOO
THICK AND PRODUCT SIDES.ON SOFT BEDDING NEVER ADD A MATTRESS,
PILLOW,COMFORTER,OR PADDING.
THE PRODUCT,INCLUDING SIDE RAILS,MUST BE FULLY ERECTED PRIOR TO USE.
ALWAYS PROVIDE THE SUPERVISION NECESSARY FOR THE CONTINUED SAFETY
OF YOUR CHILD.WHEN USED FOR PLAYING,NEVER LEAVE CHILD UNATTENDED.
· FOLLOW WARNINGS ON ALL PRODUCTS IN A CRIB. SEE HEAD PANNEL AND
MATTRESS SUPPORT FOR WARNINGS AND INSTRUCTIONS.
SHOULD BE MADE DURING USE.DO NOT USE CRIB IF ANY PARTS ARE MISSING,

#
L
4
1532 S WASHINGTON AVE PISCATAWAY TWP NJ 08854,NE

5
e.1-3/5” Allen head Bolt 4 pcs
a. 3” Allen head Bolt 16 pcs
A. Top Rail (2PCS) B. Front Rail (1PC) C. Left Front
Leg (1PC)
G. Back Rail (1PC)
E. Left Back
Leg (1PC)
J. Wooden mattress base (1PC)
CONNECTION HARDWARE
b. Barrel Nuts 16 pcs c. 3/4” Allen head Bolt 4 pcs
d. Allen Wrench 1 pcs
CRIB COMPONENTS
D. Right Front
Leg (1PC)
F. Right Back Leg (1PC) H. Left side pannel (1PC)
I. Right side pannel (1PC) K. Pad (1PC)
f. Wood Dowel 4 pcs
g. Metal connection 4 PCS
Wrench
i. Nuts 4 pcs
h.1” Allen head Bolt 4 pcs
Do Not Use Power Drills or Drivers
REQUIRED FOR ASSEM BLY
----NOT INCLUDE

STEP 1
STEP 2
Attach the left side pannel (H) to the
left front leg (C) and the left
back leg (E) by using allen head
bolts (a) and barrel nuts (b) .
Then attach
the right side pannel (I) to the right front
leg (D) and the right back leg(F) by using
allen bolts(a) and barrel nuts(b).
Attach the Top rail(A) to the left back
leg(E) and the right back leg(F) by
using wood dowel(f) and allen head
bolt(e).
Attach the back rail (G) to the left back leg(E)
and right back leg(F) by using allen head
bolts(a).
DO NOT TIGHTEN THE
SCREWS.
6

7
STEP 3
Attach metal connection(g) to the
wooden mattress base(J) by using
bolts(h) and nuts(i) with wrench.
Position the wooden mattress base
(J) to a selected position on legs.
Insert the bolts(c) into thread
inserts on legs,then tighten
securely with Allen wrench(d).
Be sure the flat side of
wooden mattress base(J)
is upward.
STEP 4
Attach the Top rail (A) and
the front rail(B) to the left front
leg (C) and right front leg(D)
by using wood dowels(f), allen
head bolts(a),allen head bolts
(e), and barrel nuts(b).
Put into the pad (K) .
TIGHTEN ALL SCREWS.
K
h
g
i

8
Remove the top rail (A) and the front rail
Connect the top rail(A) to the bottom of the left front leg and right front leg
(as the below show) by using wood dowel(f) and allen head bolt(e) and barrel nut
(b),then locate the mattress base to the lowest position.
(B).
CONVERT THE CRIB INTO DAY BED
1.Remove the Wooden mattress
base(J) and remove the right
side pannel(I) and the left side
pannel (H).
2.Use the front rail as footboard
of the bed,the back rail as headboard
3.Connect the headboard and footboard
by a standard hollywood frame
which is sold separately.
Converting crib to a twin bed I
(Hollywood bed frame sold separately)

9
Converting crib to a twin bed II
You have the option to convert crib to a twin bed II.
1:Use the back rail as the headboard of twin bed II.
3:Connect the assembled parts and headboard of twin bed to the kits ( legs, long rails,and
hardware ) which are not included and sold separately.
2:Connect the left foot platform and the right foot platform to the rail which are not included and
sold separately.
(Hollywood bed frame sold separately)

10
LIMITED WARRANTY
� Dream on Me warrants its product to be free from defects in material and
workmanship and agrees to remedy any such defect.
� This warranty covers 30 days from the date of original purchase.
� This warranty is valid only upon presentation of proof of purchase.
This is solely limited to the repair or replacement of defective furniture
components and no assembly labor is included.
� This warranty does not apply to any product which has been improperly
assembled, subjected to misuse or abuse or which has been altered or
repaired in any way.
� This warranty gives you specific legal rights and you may also have other
rights which vary from State to State.
WARNING: Should this product become damaged, and/or components
are broken or missing, DO NOT USE