DreamGEAR DGDXL-2671 User manual

PRODUCT FEATURES
PRODUCT PACKAGING
TRANSLATIONS
• CHARGING DOCK: charge and dock your DSi XL with a dock where
power meets style.
• CARRYING CASE: offers portability along with protection.
• USB SD CARD READER: transfer your data to and from via USB port.
• CAR CHARGER: stay charged and entertained while traveling.
• EARBUDS: crisp and clear audio experience.
• AUDIO SPLITTER: Share your audio with friends.
•3 SCREEN CLEANERS: 1 screen cleaners and 2 micro ber cleaning
cloths keep your DSi XL shiny and smudge-free.
• CARRY ALL TOTE BAG: Carry everything conveniently.
• 2 SMALL PRECISION STYLUSES: Increase gaming accuracy.
• 1 LARGE PRECISION STYLUS: Increase comfort and convenience while
gaming.
• 2 SETS of SCREEN PROTECTORS: Keep screens new and scratch free.
• 3 GAME CASES: Keep your games organized and protected.
• 2 WRIST STRAPS: Protect your DSi XL from being dropped or and keep
your large stylus handy.
USER’S GUIDE
PACKAGING
YES
NO
SPANISH
YES
NO
FRENCH
SHIPPING INFORMATION
QUANTITY WIDTH (in.) HEIGHT (in.) DEPTH (in.) CUBE (ft3) WEIGHT (lbs.) UPC NUMBER
1 8.5 10 2.25 0.11 0.90 8 45620 02671 5
810 11 18.5 1.18 8.95 8 45620 02671 5
4 9.25 9.75 9.75 0.51 3.95
SINGLE
MASTER
INNER
dreamGEAR and the dreamGEAR logo are registered trademarks. Nintendo and DSi XL are either registered trademarks or trademarks of Nintendo of America. This product is not designed, manufactured, licensed, endorsed or distributed by Nintendo of
America.
*DSi XL not included
1 Set of Earbuds
1 Large Precision Stylus
1 Car Charger
1 USB SD Card Reader
1 Carry All Tote Bag
1 Charging Dock
1 Carrying Case
3 Game Cases
3 Screen Cleaners
20 in 1 Starter Kit
20 essential items for your DSi XL
ITEM No. - DGDXL-2671
UPC - 8 45620 02671 5
COLOR - Silver
1 Audio Splitter
2 Small Precision Styluses
2 Wrist Straps
8 45620 02671 5

User’s Guide
FOR TECHNICAL SUPPORT
PLEASE CONTACT: 1-877-999-DREAM
or [e-mail]
PACKAGE CONTENTS:
• Charging Dock
• Carrying Case
• USB SD Card Reader
• Car Charger
• Earbuds
• Audio Splitter
• 2 Small Precision Styluses
• 1 Large Precision Stylus
• 2 Sets of Screen Protectors
• 3 Game Cases
• 2 Wrist Straps
• 3 Screen Cleaners
• Carry All Tote Bag
• User’s Guide/Warranty Card
• Registration Card
Charging Dock:
1. Place DSi XL upside-down onto the charging pin on the Charg-
ing Dock.
2. Plug in the Original DSi XL AC adapter into the back of the
Charging Dock.
3. To release, press down on the release button located on the
front of the Charging Dock.
USB SD Card Reader:
1. Pull off the back cover of the SD Card Reader exposing the
opening for an SD Card.
2. Insert an SD Card into the back of the SD Card Reader.
3. Pull off the front cover of the SD Card Reader exposing the USB
plug.
4. Insert the USB plug into any powered USB port to view or
transfer files.
5. After viewing or transferring files, pull the SD Card Reader from
the USB port.
NOTE: Please refer to your device’s User’s Guide on how to safely
remove the SD Card Reader.
6. Pull out the SD Card from the SD Card Reader.
7. Insert the SD Card into the DSi XL.
NOTE: SD Card not included.
Car Charger:
1. Connect the Car Charger to the DSi XL’s DC input.
2. Plug the Car Charger into your car’s power outlet. The DSi XL
will begin charging automatically.
Earbuds:
1. Insert the 3.5mm end of the Earbuds into the headphone jack
located on the DSi XL.
2. Volume is adjusted by the volume control on the DSi XL.
Audio Splitter:
1. Connect the Audio Splitter to the headphone input on the DSi XL.
2. Connect up to 2 earbuds or headphones to the Audio Splitter
using the 3.5mm headphone jack.
Precision Stylus:
1. Lightly touch or slide the Small Precision Stylus across the
touch screen of the DSi XL.
2. Use the stylus only on the lower touch screen.
3. Use only enough pressure to operate the game. Excessive
pressure may damage the touch screen.
NOTE: Do not use the stylus if it is broken. Replace the stylus in the
stylus holder located on the right side of the DSi XL when not in use.
Screen Protector:
1. Peel the top off the Screen Protector by pulling the red and
white sticker to the right.
2. Once you peel the Screen Protector apart, the part with the red
and white sticker belongs on the screen.
3. The sticky part of the side that you place onto the screen.