DSPPA MAG6378 User manual

[email protected] /www.dsppatech.com The specifications will be subject to change without prior notice.
Copyright © Guangzhou DSPPA Audio Co.,Ltd All rights reserved.
MAG6378 60W Network Column Speaker
The MAG6378 network column speaker is a fully digital network analog-to-digital converter with
high-fidelity speaker based on TCP/IP transmission protocol, which realizes a modern network playback
terminal with integrated processor and column speaker. It can be attached anywhere the network can arrive.
The remote audio data stream can output audio signals through the unit and directly emit sound from the
column speaker with intelligent control of the host.
All-weather design and waterproof unit, suitable for indoor and outdoor application; long service life,
high sensitivity (90±2dB), clear and bright sound;
The maximum sound pressure level is 105±2dB, and the effective frequency range is as wide as 80Hz ~
16kHz;
Can be attached anywhere the network can arrive;
Support up to 48kHz sampling rate 16bit digital audio stream decoding;
Built-in 1×60W digital amplifier, with low power consumption;
Can play background music, emergency paging, alarm signals from the system host;
Aluminum mesh, no rust;
Two-way structure, wide frequency band;
Waterproof grade IPX6 with waterproof structure.
Model
MAG6378
Acoustic System
Driver Unit
8”×1, 1” ×1
Sensitivity(1m,1W)
90dB±2dB
Max.SPL(1m)
105±2dB
Description
Features
Specifications

[email protected] /www.dsppatech.com The specifications will be subject to change without prior notice.
Copyright © Guangzhou DSPPA Audio Co.,Ltd All rights reserved.
Freq. Resp.
80Hz-16kHz(±3dB)
Rated Power (RMS)
60W
NET Play
Freq. Resp.
50Hz-16kHz(±3dB)
Distortion
≤0.5%
SNR
≥70dB
Power Supply
AC220V/50Hz
Package Dimension (L×W×H mm)
285×315×540
Machine Dimension (H×W×L mm)
230×250×430
Gross Weight
11.9kg
Net Weight
8.9kg
Product Information
1. Network interface
Connected to the network cable.
2. AC220V power input
3. Mounting hole
Installation Diagram
MAG6378: 43cm
Installation Method
1. Select an appropriate position on the facade where the column speaker is to be installed, install the six
M8 expansion bolts as shown above, attach the bracket, and fix the column speaker;
2. Connect to the power cord and network cable;
3. Adjust the angle of the column speaker and check if the installation is firm and reliable.