IMPORTANT
NEED TO KNOWS
▪Always leave your printer on to
allow the machine to perform
the necessary automatic
maintenance.
▪Any time white ink is loaded into
the X2 the printer MUST run the
auto maintenance to avoid issues.
If you know you will be away
from the printer for more than 7
days, contact Technical Support
for flush instructions.
▪Remember,if the printer cannot
clean itself while white ink is
loaded for long periods of time
and the print head carriage
warranty may be voided.
WWW.DTGCONNECTION.COM 5
▪Do not run the printer dry.
▪The printer will stop performing
the auto maintenance if any of the
ink carts reads 0%.
▪It is recommended you replace
your ink carts at 5% to avoid the
possibility of your machine
running dry and stopping the auto
maintenance cycle.
▪Remember,if the printer cannot
clean itself without ink loaded and
the print head carriage warranty
may be voided.
▪Perform daily and weekly
maintenance.
▪Each DAY it is
recommended that you run
a nozzle check.
▪This will help you
understandhow your print
heads are firing and will
help you to see potential
issues before they become
problems that can’t be
solved.
▪Each week, if white ink is
loaded, you MUST clean
the heads and the
maintenance station, EVEN
IF you’re not printing with
the machine.
