DTSystems SUPER TRAINER EDT 100 User manual

D.T. SYSTEMS, INC.
SUPERTRAINER
SUPERTRAINERTM
TM
EDT SERIES
Electronic Dog Trainer
Owner’s Manual
• EDT 100
• EDT 102
• EDT 200
• EDT 202
• EDT 300
• EDT 302

2
Congratulations and Thank you for purchasing our
EDT Super TrainerTM training collar. The EDT
series collars satisfy all your dog training needs.
With up to a 1,200 yard range they are perfect for
hunting, basic obedience and professional
training. EDT series collars feature twenty levels of
stimulation intensity, adjustable right from the
handheld transmitter. Easy one hand operation allows
for maximum control and safety. The EDT Series
Dog Training Collar is durable, safe and, when used
correctly, very humane. The automatic safety
shut-off feature stops the stimulus from both the
transmitter and the receiver to prevent accidental or
prolonged stimulation.
IMPORTANT NOTE:
Please read this owners manual entirely before
operating this unit. Should you have any questions
about our collars or their operation please contact our
Customer Service department. (See last page for
address and phone number information).

3
TABLE OF CONTENTS
• Introduction ..................................................2
• Table of Contents..........................................3
• Features.........................................................4
• Package Contents..........................................4
• Individual Model Features............................5
• Parts and Functions.......................................7
• Adjusting and Positioning
Your Collar for Proper Fit............................11
• Batteries........................................................12
• Testing..........................................................14
• Important Safety Notes.................................15
• Maintenance..................................................16
• Warranty.......................................................17
• FCC Compliance ..........................................18
• Contact Information......................................16

4
FEATURES
Every EDT Super TrainerTM Electronic Dog
Training System Features:
• Digital Technology
• 1,200 Yard Range—(Over 2/3 mile)
• Lightweight, Compact Collars (6.7 oz.) and
Transmitters (5.7 oz.)
• 20 Adjustable Intensity Levels (right from the
Transmitter)
• Invisible, Embedded Collar Antenna
• Built in Safety Shut-off
• Rechargeable Ni-MH Battery System.
• Completely Waterproof Collars
• Water Resistant Transmitters
PACKAGE CONTENTS
• Transmitter
• Collar Receiver (Two for EDT 102, EDT 202, and
EDT 302, one orange collar, one black collar)
• 2” Antenna for the Transmitter
• Rechargeable Batteries for both the Collar and
Transmitter. (Only the Transmitter Battery is user
replaceable)
• Battery Charger
• Double Jack Cable for Simultaneous Charging
• Test Light
• Owner’s Manual
• Carrying Case

5
INDIVIDUAL MODEL FEATURES
EDT 100 and EDT 102
• The EDT 100 features the options of Momentary
(Nick) Stimulation, and Constant Stimulation.
• The EDT 102 has the same features as the EDT 100
and comes with two Collar Receiver units which are
operated from the same transmitter. One Collar
Receiver is on a black collar and the other is on an
orange collar. You change from one collar to the
other by means of a small switch on the transmitter.
EDT 200 and EDT 202
• The EDT 200 features the options of Momentary
(Nick) Stimulation, and Constant Stimulation, and
Positive Vibration. The Constant Stimulation and
Vibration features can be operated separately or
simultaneously by use of the mode selector switch.
• The EDT 202 has the same features as the EDT 200
and comes with two Collar Receiver units which are
operated from the same transmitter. One Collar
Receiver is on a black collar and the other is on an
orange collar. You change from one collar to the
other by means of a small switch on the transmitter.

6
INDIVIDUAL MODEL FEATURES CONT.
EDT 300 and EDT 302
• The EDT 300 features the options of Constant
Stimulation and Positive Vibration.
• The EDT 302 has the same features as the EDT 300
and comes with two Collar Receiver units which are
operated from the same transmitter. One Collar
Receiver is on a black collar and the other is on an
orange collar. You change from one collar to the
other by means of a small switch on the transmitter.
• The EDT 300 and 302 models are specially designed
for those who are hesitant about using prolonged
stimulation (greater than 2 second) stimulation on
their dog. Bird hunters can use the vibration instead
of electrical stimulation when their dog is in the
water. This is also a great solution for hearing
impaired dogs or for dogs requiring only mild
correction.
EDT 100 & 102 Momentary (Nick)
Constant Stimulation
EDT 200 & 202 Momentary (Nick)
Constant Stimulation
Positive Vibration
EDT 300 & 302 Constant Stimulation
Positive Vibration

7
PARTS & FUNCTIONS
EDT 200 SHOWN
Transmitter Indicator Light
When one of the push button
switches on the transmitter are
pushed, the RED light will turn on
to indicate that the transmitter is
being operated. When the
battery needs charging the RED
light will blink once every 1/2 second.
Two-Dog Model Selection Switch
(EDT 102, 202 & 302)
The two-dog models have a
toggle switch to select control for
either collar.
Transmitter Parts & Functions

8
Intensity Selection Dial
The intensity selection dial allows
you to choose between twenty
different levels of stimulation,
allowing for very precise control.
PARTS & FUNCTIONS CONT.
Stimulation Activation
Push Buttons
Pressing the upper button causes
the collar to administer a
Momentary Stimulation or “Nick”.
The lower button controls the
Constant Stimulation and Vibration
Features. Which one is activated
depends on your collars specific features and, in the case
of the EDT 200 and 202, where the Stimulation Mode
Slide Selector is set.
Stimulation Mode Slide Selector
(EDT 200 and 202)
S- Constant Stimulation only
SV - Constant Stimulation
and Vibration Simultaneously
V- Vibration only

9
PARTS & FUNCTIONS CONT.
Transmitter Antenna
Be very careful when screwing the
2” antenna into the transmitter.
Hand tighten only. Over tightening
could cause damage to the antenna
or the antenna mount.
Battery Charging
Jack - Transmitter
The battery charging jack is
located on the side of the
transmitter. After charging is
complete always close the jack
with the rubber plug to prevent foreign particles from
getting inside the unit.
Collar Receiver Parts & Functions
ON/OFF Button
The Collar Receiver is activated by
pressing the ON/OFF button. Hold
the button for at least one second to
activate or deactivate the unit.

10
PARTS & FUNCTIONS CONT.
Indicator Light
When the ON/OFF button on the
Collar Receiver is pushed, the
RED light will flash steadily once
every two seconds to indicate that
the unit is active.
The RED light changes to a rapid
flash (twice per second) when the
battery is low and in need of charging.
Electrodes
Electrodes should fit snugly on the
dog’s neck to ensure good contact
with the skin. For more
information on the proper fit of the
collar see page .
Battery Charging
Jack - Collar
The battery charging jack on the
collar receiver is located next to the
collar and is covered by a rubber
plug. After charging is complete
always close the jack with the
rubber plug to prevent foreign particles from
getting inside the unit.

11
PARTS & FUNCTIONS CONT.
Collar Belt with Imbedded Receiver Antenna
The imbedded collar antenna ends at the displaced hole
midway along the belt.
CAUTION
Do not cut the collar belt. Doing so will
damage the antenna and may result in
severely decreased receiver range.
ADJUSTING & POSITIONING YOUR
COLLAR FOR PROPER FIT
Proper collar tightness and
position are very important to
insure safety and correct
functioning every time you use
the collar.

12
ADJUSTING & POSITIONING YOUR
COLLAR FOR PROPER FIT CONT.
• All electronic collars need to be very snug to work
properly. They must be just tight enough to allow the
“prongs” or electrodes to make good skin contact.
• If your collar is too loose, the stimulation may not work
properly because good skin contact is not being
achieved. This can directly affect the stimulation
performance and whether or not the dog will receive the
stimulation. Always check for good “prong” contact if
it appears that your dog is not responding to the
stimulation.
• A loose collar can promote skin irritation from moving
or rubbing too much on a dog’s neck while they are
running or training. The proper snug fit will help
prevent this from occurring.
• Proper fit of the collar is important. It should be just
tight enough on the dog’s neck to make good skin
contact and allow the dog to breath normally. The
collar should never be so tight on the dog’s neck that it
restricts the dog’s normal breathing pattern.
• For proper positioning of your collar receiver box, it
should be placed on the center of the dog’s neck..
BATTERIES
All EDT Super TrainerTM training collars are equipped
with rechargeable Nickel Metal Hydride (NiMH) batteries.
NiMH batteries are not memory sensitive and do not
require depletion before recharging.

13
The batteries come partially charged from the factory. It
is, however, recommended that you give the battery a full
charge before the first use. This takes about 14 hours.
Remember - Always keep batteries away from flammable
substances (especially when charging).
When storing the unit for long periods remember to
regularly give the batteries a full charge (14 hours). This
should be done once every 4 to 6 weeks.
Battery Charging Procedure
1. Turn off the power on the
receiver.
2. Plug the charger into a 110 Volt
outlet. (A 220 Volt European
charger is available from D.T.
Systems)
3. Charge both batteries
(transmitter and receiver) for 14
hours. This can be done
separately or simultaneously.
4. After charging, disconnect the
battery charging cables from the
receptacles and securely replace
the rubber battery receptacle
covers on both the transmitter and
the receiver.
5. Test the unit to make sure that it
is working properly.
BATTERIES CONT.

14
TESTING
There are three methods you can use to test your
EDT Super TrainerTM.
First, you should make sure that both units are fully
charged. Then turn on the power to the collar receiver.
Next, follow one of these three steps:
To Test the Electronic
Stimulation:
A)Place the tester firmly on
the electrodes of the collar
receiver.
B)Set the intensity dial and
the stimulation mode slide
selector switch to “S”.
(Note - An intensity level
setting of 7 or less might
not be enough to light the
tester).
C)Push either the Nick or
Stimu/Vib button.
D)The tester light will
quickly flash for the Nick
function and light steadily
when the Stimulation
button is pushed. (The
higher the intensity, the
brighter the test light).

15
TESTING CONT.
To Test the Vibration (with the Tester):
A)Follow the directions on page 14, but set the
stimulation mode slide selector to “V” or “SV”.
B)The unit should vibrate and the tester should light.
To Test the Vibration (without the Tester):
A)Follow the directions above.
B)The unit should vibrate.
IMPORTANT SAFETY NOTES
• Before beginning training your dog should be examined
by a veterinarian to assure that there are no physical
reasons for your dog’s excessive barking and to assure
that your dog in good health.
• Since no electronic device is perfect, there is an
extremely slim possibility that your dog may receive an
unintentional electric stimulation. Therefore never
leave the unit on your dog while unsupervised.
• Your EDT Super TrainerTM is a very valuable tool if
used correctly. Therefore it is extremely important that
you completely understand all functions of the collar
and how to properly train with it before placing it on
your dog.

16
IMPORTANT SAFETY NOTES CONT.
• The electrodes on this collar are made with high grade
stainless steel to help prevent any chemical or allergic
reactions with your dog’s skin.
• To prevent neck irritation, the collar should never be
worn for more than 12 hours a day. Daily changing the
collar location on the dog’s neck will also help prevent
irritations. It is important to keep the collar clean.
Clean the electrodes regularly with a mild anti-bacterial
soap.
• If an irritation is found, carefully wash the dog’s neck
with soap and water and then wipe the area with
Hydrogen peroxide. Dry thoroughly and apply an
antibiotic ointment.
MAINTENANCE
• It is very important to periodically clean your EDT
Super TrainerTM for maximum performance.
Regular cleaning will also lengthen the life of your unit.
• Clean the EDT Super TrainerTM collar box with
lukewarm water and a mild anti-bacterial soap.
• Take care to thoroughly clean the space between the
electrodes and the belt.
• The belt and buckle should be cleaned with water and a
mild soap then allowed to dry completely.
• Always allow the entire unit to completely dry before
using.

17
WARRANTY
D.T. Systems Premium Lifetime Warranty is the best
warranty offered in the industry. This warranty is free to
participating U.S. customers. (The warranty registration
card must be returned within 30 days of original purchase).
This changes our normal one year parts and labor warranty
to a lifetime warranty against manufacturing defects on
parts and a one year warranty on labor.
What is covered:
D.T. Systems Premium Lifetime Warranty covers all parts
to be free from manufacturing defects for as long as the
unit is held by the original owner.
What is not covered:
• Batteries are not part of our lifetime warranty.
Rechargeable batteries are warranted against defects for
one year from the original purchase date.
• Our warranty does not cover parts that malfunction
due to abuse, misuse, improper maintenance, or incorrect
handling.
• Damage from dogs chewing or wear and tear from
excessive field use is not covered.
• Our warranty does not cover the cost of shipping the
unit to our repair center. Return ground shipping (inside
the continental United States ) to the customer is covered.
However, next day or second day air shipping is not
covered and if requested will be charged.

18
WARRANTY
How the Limited Lifetime Warranty works:
• To qualify for the Warranty you must fill out the
warranty registration card which came with your
system and mail it (with your original sales receipt) to
D.T. Systems within 30 days of purchase.
• There is no charge for parts or labor for the first year on
any of our lifetime warranted products.
• When the product’s labor warranty expires after the
first year, there will be a normal labor charge for any
repair under the lifetime warranty program should your
system be in need of service. Labor charges will range
from $35 to $110 depending on:
1) the system model, and 2) the severity of the repair
needed.
• Any defective manufactured part or parts that need
replacement will be free during the lifetime warranty
period.
FCC COMPLIANCE
Your EDT Super TrainerTM has been manufactured under
complete compliance with the Federal
Communication Commission (FCC). The complex
internal structure of each product has been designed to operate
within specific regulations of FCC specifications. Any unau-
thorized modifications to your product is a
violation of these specifications.
The EDT Super TrainerTM has been made with State of the
Art equipment. Any fine adjustment should be
performed only by D.T. Systems’ technicians.

19

20
D.T. Systems, Inc.
2872 Walnut Hill Lane
Dallas, Texas 75229
Tel: [phone], (888) LUV-U-DOG
Fax: [phone]
Website: http://www.dtsystems.com
E-mail: [e-mail]