Dunlop AUTHENTIC HENDRIX '69 PSYCH SERIES UNI-VIBE... User manual

jimdunlop.com/jhw3
AUTHENTIC
HENDRIX™
’6 9 PSYCH
SERIES
UNI-VIBE®
CHORUS/
VIBRATO

JHW3 | AUTHENTIC HENDRIX™'69 PSYCH SERIES UNI-VIBE®CHORUS/VIBRATO 2
This pedal delivers the classic chorusy,
Leslie-sounding goodness used by Jimi
Hendrix in an MXR mini housing with
modern features such as a status LED,
true-bypass switching, and a 9-volt
power jack. Emblazoned with the
trippy, kaleidoscopic designs of award-
winning UK-based design crüe ILOVEDUST.

JHW3 | AUTHENTIC HENDRIX™'69 PSYCH SERIES UNI-VIBE®CHORUS/VIBRATO 3
1SPEED knob controls sweep rate of effect
2LEVEL knob controls overall volume of effect
3VIBE switch toggles between chorus mode and vibrato mode
4DEPTH knob controls overall intensity of effect
5FOOTSWITCH toggles effect on/bypass (white LED indicates on)
14
2
3
5
External Controls

JHW3 | AUTHENTIC HENDRIX™'69 PSYCH SERIES UNI-VIBE®CHORUS/VIBRATO 4
Basic Operation
1 Run a cable from your guitar to the JHW3’s INPUT jack and run
another cable from the JHW3’s OUTPUT jack to your amplifier.
2 Start with SPEED, LEVEL, and DEPTH controls at 12 o’clock.
3 Turn the effect on by depressing the footswitch.
4 Rotate SPEED knob clockwise to increase sweep rate of effect
or counterclockwise to decrease it.
5 Rotate LEVEL knob clockwise to increase overall volume or
counterclockwise to decrease it.
6 Rotate the DEPTH knob clockwise to increase intensity of effect
or counterclockwise to decrease it.
7 By default, this pedal is set to chorus mode. Push VIBE switch to
engage vibrato mode.
The Authentic Hendrix™’69 Psych Series Uni-Vibe®Chorus/Vibrato
is powered by the Dunlop ECB003 9-volt adapter or the DC Brick™ ,
Iso-Brick™, and Mini Iso-Brick™power supplies. This pedal cannot
be powered by a battery.
Power
Directions

JHW3 | AUTHENTIC HENDRIX™'69 PSYCH SERIES UNI-VIBE®CHORUS/VIBRATO 5
Specifications
Input Impedance 730 kΩ
Output Impedance
Full Volume 180 kΩ
Half Volume 33 kΩ
Max Input 0 dBV
Max Output 27 dBV
Noise Floor* -97 dBV
Speed Control 0.5 Hz to 10.5 Hz
Bypass True Hardwire
Input Impedance 600 kΩ
Output Impedance
Full Volume 29 kΩ
Half Volume 33 kΩ
Max Input 0 dBV
Max Output 8 dBV
Noise Floor* -97 dBV
Speed Control 0.5 Hz to 10.5 Hz
Bypass True Hardwire
VIBE ON
VIBE OFF
Current Draw 5 mA
Power Requirements 9 volts DC
POWER REQUIREMENTS