Dunlop CRY BABY CUSTOM BADASS WAH User manual

GCB65
CRY BABY®CUSTOM BADASS™DUAL-INDUCTOR EDITION WAH

GCB65 CRY BABY®CUSTOM BADASS™ DUAL-INDUCTOR EDITION WAH 2
1 BYPASS/WAH ON LED indicates on/bypass status (white LED indicates on)
2 HALO™ / FASEL®inductor status LED indicates inductor selection
3 HALO-IN/FASEL-OUT kickswitch toggles between Halo (indicated by blue
LEDs) & Fasel (indicated by red LEDs) inductors
4 FASEL FINE-TUNE knob adjusts toe-down frequency of Fasel Inductor mode
5 HALO FINE-TUNE knob adjusts toe-down frequency of Halo Inductor mode
EXTERNAL CONTROLS
5
4
3
12

GCB65 CRY BABY®CUSTOM BADASS™ DUAL-INDUCTOR EDITION WAH 3
BASIC OPERATION
POWER
The Cry Baby®Custom Badass™ Dual-Inductor
Edition Wah is powered by one 9-volt battery
(accessed via underside of pedal), the Dunlop
ECB003 9-volt adapter, or the DC Brick™ ,
Iso-Brick™ , and Mini Iso-Brick™ power supplies.
DIRECTIONS
1. Run an instrument cable from your guitar
to the GCB65’s INSTRUMENT jack and another
instrument cable from the GCB65’s AMPLIFIER
jack into your amplifier’s input.
2. Start with both knobs at 12 o’clock.
3. To turn the pedal on/off, push the top of the
pedal down until you hear a “click.”
4. Use the HALO-IN/FASEL-OUT kickswitch to
toggle between the Halo™ Inductor (switch in)—
for richness and punch—and the Fasel®Inductor
(switch out), which provides bright clarity and
lush harmonics.
5. Rotate the HALO FINE-TUNE knob clockwise
for a more aggressive Halo Inductor sound or
counterclockwise for a smoother sound.
6. Rotate the FASEL FINE-TUNE knob clockwise
for a more aggressive Fasel Inductor sound or
counterclockwise for a smoother sound.
7. Rock your foot back and forth on the pedal
to hear the vocal, expressive tones that the
Cry Baby Wah is famous for.

GCB65 CRY BABY®CUSTOM BADASS™ DUAL-INDUCTOR EDITION WAH 4
SPECIFICATIONS
Input Impedance 1 MΩ
Output Impedance < 10 kΩ
IMPEDANCE
Heel Down < -99 dBV
Toe Down < -90 dBV
Heel Down 550 Hz
Toe Down 1.2 to 1.8 kHz
Heel Down 380 Hz
Toe Down 1.1 to 1.5 kHz
NOISE FLOOR*
CENTER FREQ (FASEL INDUCTOR)
CENTER FREQ (HALO INDUCTOR)
Maximum Gain + 18 dB
Bypass True Hardwire
Current Draw 3 mA
Power Supply 9 volts DC
*Measurements made at 1 kHz
**All controls at mid-position, A-weighted