Durabook R8 User manual

©2023 Twinhead International Corp and/or its affiliates. All rights reserved.
1
R8 Rugged Tablet
Expansion Modules
Smart Card Reader
P/N: 62+031105+00

R8 Expansion Modules - Smart Card Reader
2
Package Contents
If any of following items is damaged, please contact your retailer.
Smart Card Reader module
Screw
(7+1+3)
Sponge
Expansion Module - Smart Card Reader Screws
Screw Name
Screw Type
Quantity
Torque
ISOT-M2.0X6L
7
2.0 ± 0.3 Kgf-cm
ISOT-M2.0X8L
1
2.0 ± 0.3 Kgf-cm
ISOT-M2.0X5L,
D=3.4mm
3
2.0 ± 0.3 Kgf-cm
NOTE
The pictures are for reference only, actual items may slightly differ.

R8 Expansion Modules - Smart Card Reader
3
Installation
This section will guide you on how to install the expansion modules to your tablet
PC.
Note: Make sure to remove the battery before installing any type of expansion
modules. For more information on how to remove/install the battery, please refer
to the tablet PC service guide.
Installing the Expansion Module - Smart
Card Reader
1. Remove the screw securing the mylar on the lower case.
2. Attach the expansion sponge to the lower case.

R8 Expansion Modules - Smart Card Reader
4
3. Connect the smart card reader harness to the mainboard connector.
4. Place the smart card reader bracket onto its slot on the lower case. Make
sure the cut edge of the bracket is aligned properly with the lower case.
5. Attach the 3 screws to secure the smart card reader bracket to the lower
case.
➢ISOT-M2.0X5L, D=3.4mm (marked with C): 3 screw.

R8 Expansion Modules - Smart Card Reader
5
6. Route the smart card reader cable as shown in the image below.
7. Align by the screw holes and then place the smart card reader on top of its
bracket.
8. Attach the 6 screws to secure the smart card reader to the lower case.
➢ISOT-M2.0X6L (marked with B): 6 screw.

R8 Expansion Modules - Smart Card Reader
6
9. Slide the smart card reader lock switch to the unlock position.
10. Open the smart card reader door.
11. Attach the 2 screws to secure the smart card reader to the lower case.
➢ISOT-M2.0X8L (marked with A): 1 screw.
➢ISOT-M2.0X6L (marked with B): 1 screw.

R8 Expansion Modules - Smart Card Reader
7
12. Close the smart card reader door.
13. Slide the smart card reader lock switch to the lock position.

R8 Expansion Modules - Smart Card Reader
8
Expansion Module - Smart Card Reader Screws
Screw Name
Screw Type
Quantity
Torque
ISOT-M2.0X6L
7
2.0 ± 0.3 Kgf-cm
ISOT-M2.0X8L
1
2.0 ± 0.3 Kgf-cm
ISOT-M2.0X5L,
D=3.4mm
3
2.0 ± 0.3 Kgf-cm
Twinhead International Corp.
11F, No.550, Ruiguang Rd., Neihu, Taipei 11492, Taiwan, R.O.C.