Durabook Rotating Hand Strap User manual

©2023 Twinhead International Corp and/or its affiliates. All rights reserved.
1
R8 Rugged Tablet
Rotating Hand Strap
P/N: 62+031070+00

Rotating Hand Strap
2
Package Contents
If any of following items is damaged, please contact your retailer.
Rotating hand strap
Bracket (4)
Screw (1)
NOTE
The pictures are for reference only, actual items may slightly differ.

Rotating Hand Strap
3
Installation
This section will guide you on how to install the rotating hand strap of your
tablet.
Installing the Rotating Hand Strap
To install the rotating hand strap, follow the steps below:
1. Remove the 2 screws from the corner at the back of the device. Align the
strap bracket (A) with the notch facing out.
2. Use the removed screws to mount on the strap bracket. Repeat the steps to
complete all four corners of the tablet.
NOTE
When mounting the bracket at the bottom left corner, please use the screw
that comes with the rotating hand strap and replace the existing screw, as
illustrated below.

Rotating Hand Strap
4
3. Insert the steel loop into each of the 4 corner straps.
4. Hook the steel loops of the rotating hand strap on the corner brackets and
tighten the corner straps.

Rotating Hand Strap
5
5. Move your hand inside the (B) part of the rotating hand strap.
6. Fix the rotating hand strap firmly so that the tablet does not come off, when
turning/moving the device.
7. Adjust the cinch strap of the rotating hand strap.

Rotating Hand Strap
6
8. Lift the end of the rotating hand strap.
9. Fix the cinch strap accordingly to turn it into a kickstand.
Twinhead International Corp.
11F, No.550, Ruiguang Rd., Neihu, Taipei 11492, Taiwan, R.O.C.