Durabook VD-T02 User manual

©2021 Twinhead International Corp and/or its affiliates. All rights reserved.
1
R11 Rugged Tablet
Cradle VD-T02
P/N: 62+009660+10

Cradle VD-T02
2
Product Overview
Front
Rear
Unlock the Latch
The latch on the docking cradle is locked
during packaging.
To unlock the latch, do the following:
1. Insert the latch bar key.
2. Turn it clockwise until a “click” is heard,
indicating the latch bar
is released.
3. Remove the key from the key slot.
No.
Item
1
Latch
2
Alignment port (x2)
3
Latch bar (with key slot)
4
Cable standoff
No.
Item
1
Mounting holes for VESA
mount
2
Cable clamp

Cradle VD-T02
3
Docking the Tablet PC
1. With screen side facing out and docking connector down, insert the R11 Tablet
PC into the alignment ports on the docking cradle.
2. Secure the R11 Tablet PC by pulling the latch forward until a “click” is heard
and the latch is fully engaged.
3. Fully push the latch bar into position to ensure the latch is tightly secured.
NOTE: If the latch bar cannot be pushed, adjust the latch position and repeat
step 3.

Cradle VD-T02
4
Undocking the Tablet PC
1. Insert the latch bar key into the latch bar and turn clockwise until a “click” is
heard. Refer to the “Unlock the Latch” section.
2. While supporting the R11 Tablet PC with one hand, push the latch backward
until it fully disengages.

Cradle VD-T02
5
3. Remove the R11 Tablet PC from the docking cradle.
Using the Cable Standoff and Cable Clamp
⚫Connect the power cable to the DC IN jack and rotate the plug (L-type) into
the cable standoff (A) to secure it in place.
⚫For other cables connection, route the cable(s) through the cable clamp (B).
Twinhead International Corp.
11F, No.550, Ruiguang Rd., Neihu, Taipei 11492, Taiwan, R.O.C.
A
B