Duratool DT000230 User manual

Page <1> V1.018/04/23

Newark.com/exclusive-brands

Farnell.com/exclusive-brands

Element14.com/exclusive-brands

User Manual

Adjustable Torque Screwdriver

Part Number: DT000230

Page <2> V1.018/04/23

Newark.com/exclusive-brands

Farnell.com/exclusive-brands

Element14.com/exclusive-brands

Care and Maintenance

1. The torque screwdriver is a precision, instrument, and should be stored with care. Do not drop. Do not strike with a hammer.

2. The torque screwdriver is lubricated for life and should not be oiled.

3. The torque screwdriver is a precision measuring instrument. Calibration must be done regalarly to ensure accuracy and is the

responsibility of the owner. Suggested calibration period is at least every 12 months or even shorter depending of situation.

4. Always store the torque screwdriver in the box when not in use to protect from dirt and humidity.

5. This torques screwdriver should only be disassembled by a qualied person. Any incorrect action to disassemble the

torque screwdriver my result in damage to this instrument.

Standard

We calibrate each torque screwdriver at the factory using torque standards according to DIN ISO 6789 & ASME B107.300-2010,

and certies it meets the accuracy requirements of specications DIN ISO 6789 and ASME B107.300-2010.

Convert From To Multiply By

ozf-in Ibf-in 0.0625

Ibf-in ozf-in 16

Ibf-in kgf-cm 1.1519

Ibf-in Ibf-ft 0.083333

Ibf-in kgf-m 0.011519

Ibf-in N-m 0.1130

Ibf-in dN-m 1.130

Ibf-ft N-m 1.356

Ibf-ft kgf-m 0.1382

Ibf-ft Ibf-in 12

N-m dN-m 10

N-m kgf-cm 10.2

N-m kgf-m 0.10197

N-m Ibf-in 8.8507

N-m Ibf-ft 0.73756

dN-m Ibf-in 0.885

dN-m N-m 0.1

kgf-cm Ibf-in 0.8681

kgf-cm N-m 0.09807

kgf-m Ibf-ft 7.233

kgf-m N-m 9.807

Safety Instructions

Warning

• Risk of ying particles

• Use of damaged hand tools, sockets, extensions and accessories may result in injury,

• Do not use torque screwdriver as a hammer

Page <3> V1.018/04/23

Newark.com/exclusive-brands

Farnell.com/exclusive-brands

Element14.com/exclusive-brands

Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for

the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change

without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness,

any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make

any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or

where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its

negligence. DURATOOL is the registered trademark of Premier Farnell Limited 2019.