STOPWATCH FUNCTION
• The measurement of time is indicated by the
stopwatch hands that move independently of the
center hands and 24-hour hand.
• The stopwatch can measure up to 60 minutes.
Restart and stop of the stopwatch can be repeated
by pressing the button A.
ACCUMULATED ELAPSED TIME
MEASUREMENT
STANDARD MEASUREMENT
60
40 20
DATE
MINUTE HAND
STOPWATCH
MINUTE
HAND
STOPWATCH
SECOND
HAND
SECOND HAND
HOUR HAND
24 HOUR
HAND
PUSH
BUTTON A
PUSH
BUTTON B
CROWN
INSTRUCTION
MANUAL
For more details on operating this timepiece please
refer to the enclosed booklet or visit :
DUXOTWATCHES.COM
CHRONOGRAPH WATCH
Meca-Quartz Chronograph
This watch is powered by a Japanese made
“Meca-Quartz” movement. It combines a battery
regulated engine with a mechanical chronograph
module. The result is a watch which delivers the
meticulous pinpoint precision of a quartz movement
along with the crisp, flyback handfeel and visual
charm of mechanical watches.
STOPRESET
1 2 3 4
START STOP RESET
START STOP RESTART
HOW TO SET THE TIME
1. Pull the crown to position [2]-(2nd click).
2. Turn the crown clockwise to set the correct time.
3. Push the crown in.
* Take a.m./p.m. into consideration when setting
the hour and minute hands to the desired time.
*When the crown is at the position [3], do not
press any button, otherwise the chronograph
hands will move.
0
2
1
0
1. Unscrew the crown and pull it out to position [1]
-(1st click).
2. Turn the crown clockwise to set the correct date.
3. Push the crown in.
* Do not set the date between 9:00 P.M. and 3:00
A.M. , otherwise the day may not change properly.
If it is necessary to set the date during the time
period, first change the time to any time outside
it, set the date and then reset the correct time.
0
1
0
Vol. 1.22 EN
HOW TO SET THE DATE
