DW -Pro 9200 Series User manual

Digital Video Recorder
Operation Instructions
Revision 11.03
DW-Pro 9200 Series

Manual Edition 11.03 – November 2003
©2000-2003, Kaltech Enterprises
All Rights reserved.
No part of this documentation may be reproduced in any means, electronic or mechanical, for any purpose, except as expressed in the
Software License Agreement. Digital Watchdog shall not be liable for technical or editorial errors or omissions contained herein. The
information in this document is subject to change without notice.
The information in this publication is provided “as is” without warranty of any kind. The entire risk arising out of the use of this
information remains with recipient. In no event shall Digital Watchdog be liable for any direct, consequential, incidental, special,
punitive, or other damages whatsoever (including without limitation, damages for loss of business profits, business interruption or loss of
business information), even if Digital Watchdog has been advised of the possibility of such damages and whether in an action or
contract or tort, including negligence.
This software and documentation are copyrighted. All other rights, including ownership of the software, are reserved to DIGITAL
WATCHDOG INCORPORATED. DIGITAL WATCHDOG, Digital Watchdog, DW-Pro, and High Definition Digital Recorder are registered
trademarks of Kaltech Enterprises Inc in the United States and elsewhere; Windows, and Windows 2000 are registered trademarks of
Microsoft Corporation; DirectCD is a registered trademark of Roxio Corporation. All other brand and product names are trademarks or
registered trademarks of the respective owners.
The following words and symbols mark special messages throughout this guide:
Kaltech Enterprises
5436 W Crenshaw St •Tampa, FL 33634 •U.S.A
Office 1-813-888-9555 •Fax 1-813-888-9262 •Tech Support 1-866-446-3595 Ext 242
Kaltech Enterprises Incorporated

DIGITAL WATCHDOG END-USER SOFTWARE LICENSE AGREEMENT
Version 1.0, June 2001
IMPORTANT: Read this before using any commercial software available from Kaltech Enterprises
This document (“License”) is a legal agreement between you (an individual or business) and Kaltech Enterprises Inc (“Kaltech Enterprises”).
Use of the enclosed or downloaded software indicates your acceptance of these terms. As used in this License Agreement, the term
“SOFTWARE” means the software included on the CD, via download or disk media provided with this License Agreement. The term
“SOFTWARE” does not include any software that is covered by a separate license offered or granted by a person other than Kaltech
Enterprises and this License does not grant any rights in such software.
Copyright laws and international copyright treaties, as well as other intellectual property laws and treaties protect the SOFTWARE. The
SOFTWARE is licensed, not sold.
IF YOU DO NOT AGREE TO THESE TERMS AND CONDITIONS, EITHER DESTROY, OR RETURN INTACT, THE SOFTWARE PACKAGE,
CONTAINING THE CD OR DISK MEDIA, TOGETHER WITH THE OTHER COMPONENTS OF THE PRODUCT TO THE PLACE OF
PURCHASE FOR A REFUND OF THE PURCHASE PRICE.
1. PROPRIETARY RIGHTS. The SOFTWARE, HARDWARE and any associated documentation are proprietary products of Kaltech
Enterprises or its licensors. And are protected under U.S. and European copyright, trademark, patent and trade secret laws and
international treaty provisions. Sole ownership of the SOFTWARE, HARDWARE and all copies, modifications, translations, and
merged portions thereof shall at all times remain with Kaltech Enterprises or its licensors.
2. GRANT OF LICENSE AND TERM. The SOFTWARE and accompanying documentation are being licensed to you. This means you
have the right to use the SOFTWARE only in accordance with this license agreement. The SOFTWARE is considered in use on a
computer when it is loaded into temporary memory or installed into permanent memory. This license may not be assigned or otherwise
transferred without prior written consent from Kaltech Enterprises, and any unauthorized transfer makes the license null and void.
a. LICENSING
i. PERSONAL LICENSE AND COMPUTER-SPECIFIC LICENSE FOR THE SERVER SOFTWARE. You the End User are authorized to
use the server software on NO MORE THAN the number of DW-Pro computers for which you have purchased licenses. All copies of
the SOFTWARE must include the Kaltech Enterprises copyright, confidentiality, trademark and patent notices. This License is personal
to you. You may not sublicense, lease, sell or otherwise transfer the Software or any of the accompanying documentation to any other
person. You may use the Software only for your own personal use if you are an individual or for your own internal business purposes if
you are a business. Each permitted copy of the SOFTWARE may be used only in connection with a hard drive(s) that is (are)
permanently connected to ONE specific DW-Pro computer (either a stand-alone computer or a computer connected to a network)
owned or leased by you. If the SOFTWARE is made available on a network, only ONE specific DW-Pro computer may access it. Once
the SOFTWARE has been accessed, by ONE specific computer, it may not be used on any additional computers without acquiring
additional licenses from Kaltech Enterprises.
ii. PERSONAL LICENSE AND COMPUTER-SPECIFIC LICENSE FOR THE CLIENT SOFTWARE. You the End User are authorized to
use the client software on NO MORE THAN 30 computers. All copies of the SOFTWARE must include the Kaltech Enterprises
copyright, confidentiality, trademark and patent notices. This License is personal to you. You may not sublicense, lease, sell or
otherwise transfer the Software or any of the accompanying documentation to any other person. You may use the Software only for
your own personal use if you are an individual or for your own internal business purposes if you are a business. Each permitted copy of
the SOFTWARE may be used only in connection with a hard drive(s) that is (are) permanently connected to ONE specific DW-Pro
computer (either a stand-alone computer or a computer connected to a network) owned or leased by you. If the SOFTWARE is made
available on a network, only ONE specific DW-Pro computer may access it. Once the SOFTWARE has been accessed, by ONE
specific computer, it may not be used on any additional computers without acquiring additional licenses from Kaltech Enterprises.
b. SERVER USE. To the extent that the applicable product invoicing or packaging sets forth, you may use the SOFTWARE on a Client
Device or as a server (“Server”) within a multi-user or networked environment (“Server Use”) for either (i) connecting, directly or
indirectly, to not more than the maximum number of specified Client Devices, or (ii) deploying not more than the maximum number of
agents (pollers) specified for deployment. If the applicable product invoicing or packaging does not specify a maximum number of
Client Devices, or pollers, this is a single product use license subject to subsection (a) above. A separate license is required for each
Client Device or “seat” that may connect the SOFTWARE at any time, regardless of whether such licensed Client Devices or seats are
connected to the SOFTWARE concurrently, or are actually using the SOFTWARE at any particular time. Your use of software or
hardware that reduces the number of Client Devices or seats that connect to and use the SOFTWARE directly or simultaneously (e.g.,
“multiplexing” or “pooling” software or hardware) does not reduce the number of licenses required. Specifically, you must have that
number of licenses that would equal the number of distinct inputs to the multiplexing or pooling software or hardware “front end”). If the
number of Client Devices or seats that can connect to the SOFTWARE can exceed the number of licenses you have obtained, then you
must have a reasonable mechanism in place to ensure that your use of the SOFTWARE does not exceed the use limits specified for
the license you have obtained. This license authorizes you to make or download one copy of the Documentation for each Client Device
or seat that is licensed, provided that each such copy contains all the proprietary notices for the Documentation.
c. VOLUME USE. If the SOFTWARE is licensed with volume use terms specified in the applicable product invoicing or packaging, you
may make, use and install as many additional copies of the SOFTWARE on the number of Client Devices as the volume use terms
authorize. You must have a reasonable mechanism in place to ensure that the number of Client Devices on which the SOFTWARE has
been installed does not exceed the number of licenses you have obtained. This license authorizes you to make or download one copy
of the Documentation for each additional copy authorized by the volume license, provided that each such copy contains all of the
proprietary notices for the Documentation.
d. STORAGE/NETWORK USE. You may also store or install a copy of the SOFTWARE on a storage device, such as a network server,
used only to install or run the SOFTWARE on your other computers over an internal network; however, you must acquire and dedicate
a license for each separate computer on which the SOFTWARE is installed or run form the storage device. A license for the
SOFTWARE may not be shared or used concurrently on different computers.

e. TERM. (i) This License is effective form the date of purchase of the License and shall remain in force until terminated. The End User
may terminate this License at any time by destroying the SOFTWARE and its associated documentation, together with all copies of any
form. (ii) Notwithstanding subparagraph d(i) above, this License may be terminated at any time by written notice of termination given by
Kaltech Enterprises to the End User in any of the following circumstances: (A) If the End User shall expressly or impliedly repudiate this
License by refusing or threatening to refuse to observe any of the conditions to which this License is subject; or (B) If the End User shall
fail to make any payment due under and pursuant to this License or to observe any of the conditions to which this License is subject
and, after the End User’s attention has been drawn by notice to such failure, shall fail to remedy the matter to Kaltech Enterprises’s
reasonable satisfaction within thirty days of the giving of such notice;; or (C) If the End User shall have a receiver or administrative
receiver or administrator appointed or shall enter into liquidation whether compulsory or voluntary or it the End User shall be unable to
pay its debts as and when they fall due. (iii) On expiry, surrender, or other termination of this License, however such termination may
arise, the End User shall cease to load, store, copy or use the Software and the associated documentation, shall delete the SOFTWARE
from its computers and shall either surrender the SOFTWARE and the associated documentation, together with all copies in any form, to
Kaltech Enterprises or shall destroy the same. The End User shall continue termination to observe and enforce confidentiality and
secrecy in respect of the SOFTWARE and its associated documentation for the benefit of Kaltech Enterprises, and however termination
may occur it shall not prejudice any right of action or remedy, which may have occurred prior to termination.
3. BACKUP COPY. In addition to any copies authorized for use under this License, the End User may make a single copy of the
SOFTWARE solely for backup purposes.
4. INTEGRITY OF THE SOFTWARE. The End User shall not enhance or vary any part of the SOFTWARE nor procure or permit the whole
or any part of the SOFTWARE (whether in its original or in any updated, enhanced, or varied form) to be incorporated into any other
software or computer system. Translations, reverse programming, disassembling, and reverse engineering of the SOFTWARE are
expressly prohibited. Provided, however, that nothing in these conditions shall restrict (i) decompiling, notwithstanding that decompiling
may involve adaptation, if the sole purpose of such decompiling is to achieve the interoperability of an independently created program
with other programs, or (ii) any other act permitted to the End User by applicable laws and regulations of the End User’s jurisdictions.
5. NON-PERMITTED USES. Without the express prior written permission of Kaltech Enterprises you may not (a) use, copy, modify, alter
or transfer electronically or otherwise, the SOFTWARE or documentation except as expressly permitted in this License Agreement, or (b)
translate, reverse program, disassemble, decompile, or otherwise reverse engineer the SOFTWARE.
6. U.S. GOVERNMENT RESTRICTED RIGHTS. If you are acquiring the SOFTWARE on behalf of any unit or agency of the United States
Government, the following provision applies: It is acknowledged that the SOFTWARE and the documentation were developed at private
expense and that no part is in the public domain and that the SOFTWARE and documentation are provided with RESTRICTED RIGHTS.
Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (C)(1)(ii) of the Rights in
Technical Data and Computer Software clause at DFARS 252.227-7013 or subparagraphs c (1) and (2) of the Commercial Computer
Software-Restricted Rights at 48 CFR 52.227-19, as applicable. Contractor/Manufacturer is Kaltech Enterprises 5436 W Crenshaw St
Tampa FL33634
7. EXPORT CONTROLS. Certain uses of the SOFTWARE by the End User maybe subject to restrictions under U.S. regulations relating
to exports and ultimate end uses of computer software. The End User agrees to fully comply with all applicable U.S. laws and
regulations, including but not limited to the Export Administration Act of 1979 as amended from time to time and any regulations
promulgated there under.
8. LIMITED WARRANTY. (a) Kaltech Enterprises warrants to the End User, (i) that the SOFTWARE (not including any third-party
software) will perform substantially in accordance with the associated documentation and (ii) that the SOFTWARE is properly recorded
on the disk media. This Limited Warranty extends for (90) days from the date of purchase of this License. Kaltech Enterprises does not
warrant any third-party software that is provided with the SOFTWARE, but Kaltech Enterprises agrees to pass on the End User any
warranties of the owner of licensor to the extent permitted by the owner or licensor. (b) This Limited Warranty does not apply to any
software that has been altered, damaged, abused, mis-applied, or used other than in accordance with this License and any instructions
included on the SOFTWARE and the associated documentation. (c) Kaltech Enterprises’s entire liability under this Limited Warranty
shall be the repair or replacement of any SOFTWARE that fails to conform with this Limited Warranty or, at Kaltech Enterprises’s option,
the return price paid for this license. Kaltech Enterprises shall have no liability under this Limited Warranty unless the SOFTWARE is
returned to Kaltech Enterprises or its authorized representative, with a copy of the End User’s receipt, within the warranty period or 30
days, whichever is longer. (d) THIS WARRANTY IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES NOT EXPRESSLY SET
FORTH HEREIN, WHETHER EXPRESS OF IMPLIED, SUBJECT TO CONTRARY ORDER PUBLIC REQUIREMENTS IN THE END
USER’S JURISDICTION. (e) The End User’s failure to return the enclosed registration card or complete the electronic registration
included with the SOFTWARE may result in Kaltech Enterprises’s inability to provide the End User with updates to the SOFTWARE, and
the End User assumes the entire risk of performance and result in such en event.
9. CONFIDENTIALITY AND CONTROL OF THE SOFTWARE. The SOFTWARE, all associated documentation, and all copies are secret
and confidential to Kaltech Enterprises and shall be retained under the effective control of the End User during the period of this
License. The End User shall take all measures necessary to preserve confidentiality and secrecy in the SOFTWARE during the period
of this License and after its termination, however such termination may arise.
10. INDEMNITIES AND LIMITATION OF LIABILITY. (a) Subject to 9(b) below, Kaltech Enterprises warrants to the End User that the
Software as supplied by Kaltech Enterprises will not infringe any copyright, patent, or other intellectual property right of any third party.
Conditionally upon the End User’s promptly giving notice to Kaltech Enterprises of any claim of alleged infringement and allowing
Kaltech Enterprises to have sole control of negotiations on, and any defense of the claim, Kaltech Enterprises shall in its discretion and
at its own cost wither compromise or defend the claim and shall hold the End User harmless from any resulting final judgment, order, or
settlement. Kaltech Enterprises shall have the right to replace or change the SOFTWARE so as to avoid infringement and require the
End User to accept a license to use such replaced or changed SOFTWARE in substitution for this License, provided that the
SOFTWARE as substituted is substantially suitable for the End User’s utilization. (b) Kaltech Enterprises’s maximum liability to the End
User under 9(a) above shall not exceed the License fees actually paid by the End User for the SOFTWARE. If Kaltech Enterprises
becomes aware of a potential claim under 9(a) above, Kaltech Enterprises shall be entitled then or at anytime thereafter to discharge its
liabilities (including potential, accruing, and accrued liabilities) to the End User under 9(a) above by requiring the End User to surrender
this License and to cease use of the SOFTWARE upon Kaltech Enterprises’s paying to the End User a sum equivalent to the maximum
amount of Kaltech Enterprises’s liability as stated above. (c) GENERAL LIMITATION OF LIABILITY AND INDEMNITIES. KALTECH
ENTERPRISES’S MAXIMUM LIABILITY RELATED TO ANY OF THE SOFTWARE SHALL NOT EXCEED THE LICENSE FEES
ACTUALLY PAID BY THE END USER FOR THE SOFTWARE.

FOR BELGIUM, FRANCE, IRELAND, AND THE NETHERLANDS: IN NO EVENT SHALL KALTECH ENTERPRISES BE LIABLE TO THE
END USER, EXCEPT IN RESPECT OF (a) DEATH, PERSONAL INJURY, OR DAMAGE TO PROPERTY CAUSED BY KALTECH
ENTERPRISES’S NEGLIGENCE OR (b) KALTECH ENTERPRISES’S GROSS NEGLIGENCE OR WILLFUL MISCONDUCT, FOR AN AMOUNT IN
EXCESS OF THE MAXIMUM AMOUNT OF KALTECH ENTERPRISES’S LIABILITY AS STATED IN 9(b) ABOVE, BY REASON OF ANY
REPRESENTATION OR IMPLIED WARRANTY, CONDITION, OR OTHER TERM OR ANY DUTY AT LAW, OR UNDER THE TERMS OF THIS
AGREEMENT, FOR ANY CONSEQUENTIAL LOSS OR DAMAGE (WHETHER FOR LOSS OF PROFIT, BUSINESS INTERRUPTION, LOSS OF
BUSINESS INFORMATION, OR OTHERWISE) ARISING OUT OF OR IN CONNECTION WITH ANY ACT OR OMISSION OF KALTECH
ENTERPRISES RELATING TO THE USE OR INABILITY TO USE THE PRODUCT BY THE END USER.
FOR GREECE: IN NO EVENT SHALL KALTECH ENTERPRISES BE LIABLE TO THE END USER, EXCEPT IN RESPECT OF DEATH,
DAMAGE TO PROPERTY OR PERSONAL INJURY CAUSED BY KALTECH ENTERPRISES’S FRAUD OR GROSS NEGLIGENCE, FOR AN
AMOUNT IN EXCESS OF THE MAXIMUM AMOUNT OF KALTECH ENTERPRISES’S LIABILITY AS STATED IN 9(b) ABOVE, BY REASON OF
ANY REPRESENTATION OR IMPLIED WARRANTY, CONDITION, OR OTHER TERM OR ANY DUTY AT LAW, OR UNDER THE TERMS OF
THIS AGREEMENT, FOR ANY CONSEQUENTIAL LOSS OR DAMAGE (WHETHER FOR LOSS OF PROFIT, BUSINESS INTERRUPTION, LOSS
OF BUSINESS INFORMATION, OR OTHERWISE) ARISING OUT OF OR IN CONNECTION WITH ANY ACT OR OMISSION OF KALTECH
ENTERPRISES RELATING TO THE USE OR INABILITY TO USE THE PRODUCT BY THE END USER.
FOR ITALY: IN NO EVENT SHALL KALTECH ENTERPRISES BE LIABLE TO THE END USER, EXCEPT IN RESPECT OF DEATH,
DAMAGE TO PROPERTY OR PERSONAL INJURY CAUSED BY KALTECH ENTERPRISES’S FRAUD OR GROSS NEGLIGENCE OR
VIOLATION OF A DUTY ARISING FORM APPLICABLE ORDINE PUBBLICO RULES FOR AN AMOUNT IN EXCESS OF THE MAXIMUM
AMOUNT OF KALTECH ENTERPRISES’S LIABILITY AS STATED IN 9(b) ABOVE, BY REASON OF ANY REPRESENTATION OR IMPLIED
WARRANTY, CONDITION, OR OTHER TERM OR ANY DUTY AT LAW, OR UNDER THE TERMS OF THIS AGREEMENT, FOR ANY
CONSEQUENTIAL LOSS OR DAMAGE (WHETHER FOR LOSS OF PROFIT, BUSINESS INTERRUPTION, LOSS OF BUSINESS
INFORMATION, OR OTHERWISE) ARISING OUT OF OR IN CONNECTION WITH ANY ACT OR OMISSION OF KALTECH ENTERPRISES
RELATING TO THE USE OR INABILITY TO USE THE PRODUCT BY THE END USER.
FOR DENMARK, FINLAND AND NORWAY: IN NO EVENT SHALL KALTECH ENTERPRISES BE LIABLE TO THE END USER, EXCEPT (i)
IN RESPECT OF DEATH OR PERSONAL INJURY CAUSED BY KALTECH ENTERPRISES’S GROSS NEGLIGENCE OR WILLFUL
MISCONDUCT OR (ii) IF SUCH LIABILITY LIMITATION IS UNREASONABLE UNDER ALL RELEVANT CIRCUMSTANCES , FOR AN AMOUNT
IN EXCESS OF THE MAXIMUM AMOUNT OF KALTECH ENTERPRISES’S LIABILITY AS STATED IN 9(b) ABOVE, BY REASON OF ANY
REPRESENTATION OR IMPLIED WARRANTY, CONDITION, OR OTHER TERM OR ANY DUTY AT LAW, OR UNDER THE TERMS OF THIS
AGREEMENT, FOR ANY CONSEQUENTIAL LOSS OR DAMAGE (WHETHER FOR LOSS OF PROFIT, BUSINESS INTERRUPTION, LOSS OF
BUSINESS INFORMATION, OR OTHERWISE) ARISING OUT OF OR IN CONNECTION WITH ANY ACT OR OMISSION OF KALTECH
ENTERPRISES RELATING TO THE USE OR INABILITY TO USE THE PRODUCT BY THE END USER.
FOR PORTUGAL: IN NO EVENT SHALL KALTECH ENTERPRISES BE LIABLE TO THE END USER, EXCEPT IN RESPECT OF DEATH,
DAMAGE TO PROPERTY OR PERSONAL INJURY CAUSED BY KALTECH ENTERPRISES’S GROSS NEGLIGENCE OR WILLFUL
MISCONDUCT, FOR AN AMOUNT IN EXCESS OF THE MAXIMUM AMOUNT OF KALTECH ENTERPRISES’S LIABILITY AS STATED IN 9(b)
ABOVE, BY REASON OF ANY REPRESENTATION OR IMPLIED WARRANTY, CONDITION, OR OTHER TERM OR ANY DUTY AT LAW, OR
UNDER THE TERMS OF THIS
AGREEMENT, FOR ANY CONSEQUENTIAL LOSS OR DAMAGE (WHETHER FOR LOSS OF PROFIT, BUSINESS INTERRUPTION, LOSS OF
BUSINESS INFORMATION, OR OTHERWISE) ARISING OUT OF OR IN CONNECTION WITH ANY ACT OR OMISSION OF KALTECH
ENTERPRISES RELATING TO THE USE OR INABILITY TO USE THE PRODUCT BY THE END USER.
FOR SPAIN: IN NO EVENT SHALL KALTECH ENTERPRISES BE LIABLE TO THE END USER, EXCEPT IN RESPECT OF DEATH, DAMAGE TO
PROPERTY OR PERSONAL INJURY CAUSED BY KALTECH ENTERPRISES’S BAD FAITH CONDUCT, FOR AN AMOUNT IN EXCESS OF THE
MAXIMUM AMOUNT OF KALTECH ENTERPRISES’S LIABILITY AS STATED IN 9(b) ABOVE, BY REASON OF ANY REPRESENTATION OR
IMPLIED WARRANTY, CONDITION, OR OTHER TERM OR ANY DUTY AT LAW, OR UNDER THE TERMS OF THIS AGREEMENT, FOR ANY
CONSEQUENTIAL LOSS OR DAMAGE (WHETHER FOR LOSS OF PROFIT, BUSINESS INTERRUPTION, LOSS OF BUSINESS
INFORMATION, OR OTHERWISE) ARISING OUT OF OR IN CONNECTION WITH ANY ACT OR OMISSION OF KALTECH ENTERPRISES
RELATING TO THE USE OR INABILITY TO USE THE PRODUCT BY THE END USER.
FOR SWEDEN: IN NO EVENT SHALL KALTECH ENTERPRISES BE LIABLE TO THE END USER, EXCEPT IN RESPECT OF DEATH, DAMAGE
TO PROPERTY OR PERSONAL INJURY CAUSED BY KALTECH ENTERPRISES’S GROSS NEGLIGENCE OR WILLFUL MISCONDUCT, FOR
AN AMOUNT IN EXCESS OF THE MAXIMUM AMOUNT OF KALTECH ENTERPRISES’S LIABILITY AS STATED IN 9(b) ABOVE, BY REASON
OF ANY REPRESENTATION OR IMPLIED WARRANTY, CONDITION, OR OTHER TERM OR ANY DUTY AT LAW, OR UNDER THE TERMS OF
THIS AGREEMENT, FOR ANY CONSEQUENTIAL LOSS OR DAMAGE (WHETHER FOR LOSS OF PROFIT, BUSINESS INTERRUPTION, LOSS
OF BUSINESS INFORMATION, OR OTHERWISE) ARISING OUT OF OR IN CONNECTION WITH ANY ACT OR OMISSION OF KALTECH
ENTERPRISES RELATING TO THE USE OR INABILITY TO USE THE PRODUCT BY THE END USER.
FOR THE UNITED KINGDOM: IN NO EVENT SHALL KALTECH ENTERPRISES BE LIABLE TO THE END USER, EXCEPT IN RESPECT OF (a)
DEATH OR PERSONAL INJURY CAUSED BY KALTECH ENTERPRISES’S NEGLIGENCE OR (b) DAMAGE TO PROPERTY OR OTHER LOSS
CAUSED BY KALTECH ENTERPRISES WHERE SUCH LIABILITY LIMITATION IS UNREASONABLE UNDER ALL RELEVANT
CIRCUMSTANCES. FOR AN AMOUNT IN EXCESS OF THE MAXIMUM AMOUNT OF KALTECH ENTERPRISES’S LIABILITY AS STATED IN
9(b) ABOVE, BY REASON OF ANY REPRESENTATION OR IMPLIED WARRANTY, CONDITION, OR OTHER TERM OR ANY DUTY AT LAW,
OR UNDER THE TERMS OF THIS AGREEMENT, FOR ANY CONSEQUENTIAL LOSS OR DAMAGE (WHETHER FOR LOSS OF PROFIT,
BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHERWISE) ARISING OUT OF OR IN CONNECTION WITH ANY ACT
OR OMISSION OF KALTECH ENTERPRISES RELATING TO THE USE OR INABILITY TO USE THE PRODUCT BY THE END USER

AGREEMENT, FOR ANY CONSEQUENTIAL LOSS OR DAMAGE (WHETHER FOR LOSS OF PROFIT, BUSINESS INTERRUPTION, LOSS
OF BUSINESS INFORMATION, OR OTHERWISE) ARISING OUT OF OR IN CONNECTION WITH ANY ACT OR OMISSION OF
KALTECH ENTERPRISES RELATING TO THE USE OR INABILITY TO USE THE PRODUCT BY THE END USER.
FOR SPAIN: IN NO EVENT SHALL KALTECH ENTERPRISES BE LIABLE TO THE END USER, EXCEPT IN RESPECT OF DEATH,
DAMAGE TO PROPERTY OR PERSONAL INJURY CAUSED BY KALTECH ENTERPRISES’S BAD FAITH CONDUCT, FOR AN
AMOUNT IN EXCESS OF THE MAXIMUM AMOUNT OF KALTECH ENTERPRISES’S LIABILITY AS STATED IN 9(b) ABOVE, BY
REASON OF ANY REPRESENTATION OR IMPLIED WARRANTY, CONDITION, OR OTHER TERM OR ANY DUTY AT LAW, OR
UNDER THE TERMS OF THIS AGREEMENT, FOR ANY CONSEQUENTIAL LOSS OR DAMAGE (WHETHER FOR LOSS OF PROFIT,
BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHERWISE) ARISING OUT OF OR IN CONNECTION WITH
ANY ACT OR OMISSION OF KALTECH ENTERPRISES RELATING TO THE USE OR INABILITY TO USE THE PRODUCT BY THE
END USER.
FOR SWEDEN: IN NO EVENT SHALL KALTECH ENTERPRISES BE LIABLE TO THE END USER, EXCEPT IN RESPECT OF DEATH,
DAMAGE TO PROPERTY OR PERSONAL INJURY CAUSED BY KALTECH ENTERPRISES’S GROSS NEGLIGENCE OR WILLFUL
MISCONDUCT, FOR AN AMOUNT IN EXCESS OF THE MAXIMUM AMOUNT OF KALTECH ENTERPRISES’S LIABILITY AS STATED
IN 9(b) ABOVE, BY REASON OF ANY REPRESENTATION OR IMPLIED WARRANTY, CONDITION, OR OTHER TERM OR ANY DUTY
AT LAW, OR UNDER THE TERMS OF THIS AGREEMENT, FOR ANY CONSEQUENTIAL LOSS OR DAMAGE (WHETHER FOR LOSS
OF PROFIT, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHERWISE) ARISING OUT OF OR IN
CONNECTION WITH ANY ACT OR OMISSION OF KALTECH ENTERPRISES RELATING TO THE USE OR INABILITY TO USE THE
PRODUCT BY THE END USER.
FOR THE UNITED KINGDOM: IN NO EVENT SHALL KALTECH ENTERPRISES BE LIABLE TO THE END USER, EXCEPT IN RESPECT OF
(a) DEATH OR PERSONAL INJURY CAUSED BY KALTECH ENTERPRISES’S NEGLIGENCE OR (b) DAMAGE TO PROPERTY OR
OTHER LOSS CAUSED BY KALTECH ENTERPRISES WHERE SUCH LIABILITY LIMITATION IS UNREASONABLE UNDER ALL
RELEVANT CIRCUMSTANCES. FOR AN AMOUNT IN EXCESS OF THE MAXIMUM AMOUNT OF KALTECH ENTERPRISES’S
LIABILITY AS STATED IN 9(b) ABOVE, BY REASON OF ANY REPRESENTATION OR IMPLIED WARRANTY, CONDITION, OR
OTHER TERM OR ANY DUTY AT LAW, OR UNDER THE TERMS OF THIS AGREEMENT, FOR ANY CONSEQUENTIAL LOSS OR
DAMAGE (WHETHER FOR LOSS OF PROFIT, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHERWISE)
ARISING OUT OF OR IN CONNECTION WITH ANY ACT OR OMISSION OF KALTECH ENTERPRISES RELATING TO THE USE OR
INABILITY TO USE THE PRODUCT BY THE END USER
11. NO LIABILITY FOR DAMAGES, INCLUDING WITHOUT LIMITATION CONSEQUENTIAL DAMAGES
In no event shall Kaltech Enterprises or its Licensor's be liable for any damages whatsoever (including, without limitation, incidental,
direct, indirect, special or consequential damages, damages for loss of business profits, business interruption, loss of business
information, or other pecuniary loss) arising out of the use or inability to use this Software, even if Kaltech Enterprises or its Licensor's
have been advised of the possibility of such damages. Because some states/ countries do not allow the exclusion or limitation of liability
for consequential or incidental damages, the above limitation may not apply to you.
12. NO WAIVER. Any failure by either party to this agreement to enforce a specific part of the agreement in a specific situation is
not a waiver of rights under the agreement. The party may still enforce the rest of the agreement in that situation and may still enforce
some or all of the agreement in other situations.
13. This License constitutes the entire agreement between the End User and KALTECH ENTERPRISES pertaining to its subject
matter. This License is governed by the laws of the State of Washington (except the body of laws controlling conflict laws). The state
and federal courts having appropriate jurisdiction over the State of Washington will pursue any litigation arising from this license. Even if
part of the agreement is held invalid, the rest of the agreement shall still be valid, binding, and enforceable. The failure of either party to
exercise a right does not waive future exercise of that right or other rights.
Should the End User have any questions concerning this License, or if the End User desires to contact Kaltech Enterprises for any reason,
please write: Kaltech Enterprises 5436 W Crenshaw St Tampa Fl 33634
Copyright© 2001, Kaltech Enterprises All rights reserved.

IMPORTANT SAFETY INSTRUCTIONS
1. Read Owner’s Manual
After unpacking this product, read the owner’s manual carefully, and follow all the operating and other instructions.
2. Power Sources
This product should be operated only from the type of power source indicated on the label. If you are not sure of the type
of power supply to your home or business, consult your product dealer or local power company.
3. Ventilation
Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to
protect it from overheating, and these openings must not be blocked or covered. The product should not be placed in a
built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions
have been adhered to.
4. Heat
The product should be situated away from heat sources such as radiators. Heat registers, stoves, or other product that
produce heat.
5. Water and Moisture
Do not use this product near water. Do not exceed the humidity specifications for the product as detailed in the Appendix
section in this manual.
6. Cleaning
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp
cloth for cleaning.
7. Power Cord Protection
Power-supply cords should not be routed so that they are not likely to be walked on or pinched by items placed against
them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the
product.
8. Overloading
Do not overload wall outlets; extension cords, or integral convenience receptacles as this can result in a risk of fire or
electrical shock.
9. Lightning
For added protection for this product during storm, or when it is left unattended and unused for long periods of time,
unplug it from the wall outlet. This will prevent damage to the product due to lightning and power line surges.
10. Object and Liquid Entry Points
Never insert foreign objects into the DW-Pro unit, other than the media types approved by Kaltech Enterprises, as they
may touch dangerous voltage points or short-out parts that could result in a fire or electrical shock. Never spill liquid of
any kind on the product.
11. Accessories
Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious
personal injury and serious damage to the product.

IMPORTANT SAFETY INSTRUCTIONS
12. Disc Tray
Keep your fingers well clear of the disc tray as it is closing. Neglecting to do so may cause serious personal injury.
13. Burden
Do not place a heavy object on or step on the product. The object may fall, causing serious personal injury and serious
damage to the product.
14. Disc
Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious personal injury
and product malfunction.
15. Damage Requiring Service
Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions.
•When the power–supply cord or plug is damaged.
•If liquid has been spilled, or objects have fallen into the product.
•If the product has been exposed to rain or water.
•If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered
by the operating instructions as an improper adjustment of other controls may result in damage and will often require
extensive work by a qualified technician to restore the product to its normal operation.
•If the product has been dropped or damaged in any way.
•When the product exhibits a distinct change in performance –this indicates a need for service.
16. Servicing
Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified personnel.
17. Replacement Parts
When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer
or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electrical shock, or
other hazards.
18. Safety Check
Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that
the product is in proper operating condition.

When shipping the DW-Pro unit, the original shipping carton
packing materials come in handy. For maximum protection, repack the
unit as it was originally packed at the factory.
Do not use volatile liquids, such as insect spray, near the DW-
Pro unit. Do not leave rubber or plastic products in contact with the DW-
Pro unit for long periods of time. They will leave marks on the finish.
The top and rear panels of the DW-Pro unit may become warm
after long periods of use. This is not a malfunction.
Place the DW-Pro unit on a level surface. Do not use it on a shaky or
unstable surface such as a wobbling table or inclined stand.
When you place this DW-Pro unit next to a TV, radio, or VCR, the
playback picture may become poor and the sound may be distorted. In
this case, place the DW-Pro unit away from the TV, radio, or VCR.
Use a soft dry cloth for cleaning.
For stubborn dirt, soak the cloth in a weak detergent solution,
wring well and wipe. Use a dry cloth to wipe it dry.
Do not use any type of solvent, such as thinner and benzene, as they
may damage the surface of the DW-Pro unit.
If you use a chemical saturated cloth to clean the unit, follow that
product’s instructions.
This DW-Pro unit is designed to last for long periods of time. To keep
your DW-Pro unit always operational we recommend regular inspection
maintenance (cleaning parts or replacement). For details contact your
nearest dealer.
Moisture condensation damages the
DW-Pro unit. Please read the following
carefully.
Moisture condensation occurs during the
following cases.
When you bring the DW-Pro unit
directly from a cold place to a warm
place.
When you use the DW-Pro unit in
a room where you just turned on the
heater, or a place where the cold wind
from the air conditioner directly hits the
unit.
In the summer, when you use the
DW-Pro unit in a hot and humid place
just after you move the unit from an air
conditioned room.
When you use the DW-Pro unit in
a humid place.
Do not use the DW-Pro unit when
moisture condensation may occur.
If you use the DW-Pro unit in such a
situation, it may damage discs and
internal parts. Remove any CD discs,
connect the power cord of the DW-Pro
unit to the wall outlet, turn on the DW-Pro
unit, and leave it for two to three hours.
After two to three hours, the DW-Pro unit
will have warmed up and evaporated any
moisture. Keep the DW-Pro unit
connected top the wall and moisture will
seldom occur.

Contents
Digital Video Recording System
DW9200 System
Mouse
Key Board
Power Cable
User Guide
!
[Caution]
recommended monitor is one that has a
resolution of at least 1024*768, 60Hz.
(Above is the default spec. of DW9200)
Check to make sure the box has everything below.
Contact your dealer if there is any missed item.
(Optional: Monitor and Communication cables)
MONITOR(option)
Key
Communication conversion cable
( used for PAN/TILT CAMERA )
Serial Port Cable

Contents
Contents
1
1. DW9200 User Guide
1.1 Switching to Search …………………………………………………15
1.2 Selecting by date & time…….…………………………..…………16
1.3 Selecting Camera .……….………………………………..……….17
1.4 Running Search Screen ………………………….……..…..…18
1.5 Searching Index ………………..……………………………..…....20
1.6 Book Mark ………… .………………...……………………..……..22
1.7 Extension/Reduction and Movement of Search Screen .….……23
1.8 Improving image quality of Search Screen.………………..….….24
1.9 Audio Replay ………………………………….....................….......25
1.10 Printing searched data……………………………………….….…26
1.11 Data backup ………………………………………………….…..…28
1.12 Closing Search Screen and Transferring to Detection Mode…..39
1. Configuring Searching
2. Configuring Surveillance mode
2.1 Surveillance screen(default)…………………………..……………41
2.2 Input Password ..………………………………..……………..42
2.3 Selecting split screen……………………………………………….43
2.4 Changing between Pan/Tilt & surveillance mode ……………….44
2.5 Controlling Pan/Tilt mode ………………………………………….45

2
1.1 Surveillance screen(default)……………………………………48
1.2 Input Password ……..…………………………….…………….49
1.3 Hardware setting………………………………..……….………50
1.4 Motion detection setting……………………………….………..54
1.5 Recording Date setting…………………………….……….…..60
1.6 Screen split setting………………………………….…………..64
1.7 Communication setting….…………………………….………...65
1.8 Site Information.…………………………………………….……67
1.9 Password setting…………………………………………..…….69
1.10 Audio setting…………………………………………….………70
1.11 System setting…………………………………………………..72
1.12 Motion Tracking…………………………………………………82
1.13 Input Structure……………………………………………..……86
1.14 E-Map Setting…………………………………………….…….87
1.Setting Program
2. DW9200 Function Guide
1. CD formatting and backup using direct CD S/W ……………….91
2. CD formatting using InCD S/W …………………………………..95
3. System setting for storing voice(in using sound card) ..………...98
2. Appendix

1. Front side………………………………………..………………104
2. Rear side………………………………………………..………105
3. Connecting PAN/TILT Drive.…………………………….……106
4. Connecting PSTN and ISDN exclusive modem line………..107
4.1 LAN, ISDN(using Router ), Connecting exclusive line..107
4.2 Connecting PSTN, ISDN Modem………………………..108
5. Connection map of RX-RECEIVER (KRE-301).………..…..109
6. Connection map of RX-RECEIVER (KRE-302).……..……..110
7. Connecting external Sensor ………………………….………111
8. Connecting Control pin ………………………….…………….111
9. Connecting Serial Cable……………………………………….112
1.DW9200 installation 3
3. DW9200 Installation Guide

1. Searching setup
1.1 Switching to Search ……………..…………………………………15
1.2 Selecting by date & time…….…………………………..…………16
1.3 Selecting Camera .……….………………………………..……….17
1.4 Running Search Screen ………………………….……..…..…18
1.5 Searching Index ………………..……………………………..…....20
1.6 Book Mark ………… .………………...……………………..……..22
1.7 Extension/Reduction and Movement of Search Screen .….……23
1.8 Improving image quality of Search Screen.………………..….….24
1.9 Audio Replay ………………………………….....................….......25
1.10 Printing searched data……………………………………….….…26
1.11 Data backup ………………………………………………….…..…28
1.12 Closing Search Screen and Transferring to Detection Mode…..39
1 DW9200 User Guide

1.1 Switching to Search
How to setup
How to setup
Press this button in surveillance mode.
Click this button to switch to
[Surveillance mode]
[search mode]
1
2
Password input window appears Enter password and click [OK]
3
[Tips]
• You can enter the setup menu by entering 4-digit password or by clicking numbered buttons located on
the right hand side.
• It is impossible to change each operator’s registered password so please do not forget it.
• We recommend operator1 changes all the password.
• Please refer to page 69 for changing password information.
1

[Select date and time]
Clicking on this button displays date, month, year ,hour, and minute.
1.2 Searching by date and time
1
Year, month
Time, minute
2
3
4
day

1.3 Selecting Camera
!#"%$&
•
'!() *
!
)
) *
*
*
$!
(
#"%$
*+
,-#"%$&
•
$ $./!#"%$/!"%$0132
) *(
*
$!#
(4+
•
5
4013
)
67
(
$3#"%$/"%$8
(
$
$
*:9
;
)
!<=!#"%$/!"%$
’
*
<
9(
! 42
)
(
#!<$
+
'!)
">$
)
!;
)
#
)
?#!;@"%#<
)
0
)
!<?<
9(
$
)
0&
•
5
)
!;
)
#$
*
)
"%$3
*
$;A;#
+
•
B/(
$C01D
)
6EC
)
"%$8F01G#D $!# 0
(
$#6H
(
$C<
9(
$
)
0I0H
(
$$
9(
*
$
*
J
(
01K
+
L
LL
L
5
!;
)
#
)
*
$!;A#"%M&
•
'!() *
!
)
)
!;
)
#$
*
$;
)
!<N0
9
$A#;
*
)
<
)
"%$
)
/<
9(4+
•
OP)
!6 #
)
!;
)
#$
*
‘
,Q!
)
!
*>R
$;
)
<
’
8
S
$ #
)
!;
)
#$
*
‘
T
)
R
$;
)
!<
’
8
U
#67V$ 2 #
)
!;
)
#$
*
‘
$
*
R
$;
)
!<
’
8
W
$$# #
)
!;
)
#$
*
‘
O
$3XP #"
’
8
#!;=
(
$$32
)
$3!A<
9()
3#
)
4
()
!<=2Y
*
$;$!;
+
$#
(
S
#Z&
•
'!() *[)
!;
)
#$
*
)
"%$\
)
!$]
9
$
*
$! 0
*
$#
()
!<
;#
+
•
T
^1$_
(
$_#`a
(
$a $b#!;c
)
<
(
`
*
$!#
(
(
$
*
$!;A;#
+
9
)
$$
*
$
9
&
•
B/(
$I01I
)
6d
(
$E!8
*:9
)
a"e;$
"
*
$#
(f*
$$g2
)
F#"%#
)
!# 0D
(
#<$
#;
)
!<aa
(
$_!"%$bh#"%$
*
01i
(
*
$
)
/"j4k8l8m8bnpo8bnpq8.bnpl
*:9
)
*
$$
+
rhs1t
uhs1t
vhs1t
wxhst
wyhst
wus1t
z
"%$
*
$! $$;
,-#"%$
R
$
9
#0
*9
)
."%;$
n n
*9
)
."%;$J{ K
np|}k k
*9
)
."%;$
np|}l l
*9
)
."%;$
np|}m m
*9
)
."%;$
np|/npo npo
*9
)
."%;$
np|/npq npq
*9
)
."%;$
np|/npl npl
*9
)
."%;$
$$2
)
$3$"
9
0
)
4!
)
"%#<$32Y
*%*
$!;
"j
(
$
*
$ $$;=#"%$
+
[Tip]
L
LL
L

O
#01#6
*
$#
(3*
$$~&
•
V3"%
*
.
)
!"%$4#"%$/2
)
(
;#$#!;
)
"%$$$3!
)
!<
+
•
You can playback with SKIP and DELAY.
T
^1$3
*
$ $$;A;#$3#;
)
)
)
##;#
O
#0
)
!<A!$
9)
$3#612Y#;
R
$^1$
*
$
9
#0#6
9
2`#;
9
#01#6
O
#0
)
!<A!$
9)
$32`#;
Move to very last data from selected date
1.4 Running Search Screen
L
LL
L
O
#!#"e&
B/(
$
*
$#
()
!<c2
)
(
!$i#"%$#8b
() *
!
)
*
$
)
^1$ 0
*(
2
*
01i
(
$
*
$ $$;
)
"%<$
)
k8l8m8bnpo8`npq8bnl
*9
)
."e;$
+
5
!;
)
#
)
$!$2Y&
'!() *
!
)
) *
=$!$2F3<
9(3)
!;
)
#
)
2
()
$
*
$#
()
!<=
(
$3$;$;A;#
+
•
5
"%#<$
) *
$;$!;
*)
"% #$
*
072
()
$
*
$#
()
!<
+
S
.
(
$
*
$#
(3*
$$2
)
#!
)
!;
)
#$3#!07<
9(
$;$;A;#/2
(
$
*
$#
()
!<
+
$ $
)
!<c
5
!;
)
#
)
$!;=#"e!
$!$2Y#&Q2
)
#$!$2F
(
$3<
9(
$;$!;=;#
+
[Tip]
R
$;
)
!<
*
#
*
2
()
$
*
$#
()
!<&
$#
()
!<
*9
$$!;=2
)
)
!$
*
$
)
4013;=.$;
#!0
)
"%#<$32
()
$
*
$!#
()
<
+
,Q
)
6A
9=R
$;
)
!<&
)
40132Y#!.=$;
+
L
LL
L

6
) 9
&
•
$#
(
$;A
9
.
)
"%<$2
)
$
)
<$!;=
*
"%
(
*
;$
*)
<!#$!;=
9
!"%$
+#5
.2
)
#
(
$
<
)
^1$3
(
$3
9
.A/"%
)
+
•
U
$
*)
<!#$!;=!"%$
) *
!.
(
$3!#"%$
(
$
)
"%#<$
*
)
) *
#
)
!$!##^# $3
U
B
moo
9
<#"
+
Knh|]qo
1 30
U
$ #0&
•
'!() *>)
!;
)
#$
*
(
$3
)
"%$3
(
#.#61$
*
4!$
)
"%#<$
A
9
.=/"e
)
+
Ko3J{
*
$
*
Kc|
o3J
*
2Y$
*
K
0 50

L
LL
L
F!IA.c
F!IA.c
$#
()
!<
5
!;$
&
XP$
*
$ $
)
!<=
(
$3
)
"%$3
*
$#
(
8
(
$
9
$
**
)
!;$
)
;
)
#$3
(
$
)
!;$
4$#
(
)
"%$8
#!;
) *>9
**)
$3
*
$#
(
01¡4$;$!;=;$8
#"%$#86
)
!;=4$;
)
!<J{"%
)
!8
*
$
*
K
+
L
LL
L
L
LL
L
¢$#$#$##$&
¢$#$#$##$&¢$#$#$##$&
¢$#$#$##$&
•
'!(
$3;#3;$
*
99
$!#2
(
$01
*
$ $
)
!;$
4;#/
(
#2Y
*
$;$!;=2
)
(
^1$
*)
*
$$
U
B
moo3^1k
+
oqo38#!;
) *
! 0
9
*:*)
$32
(
$$;$!;A2
)
(3)
^1k
+
oqo/^1$
*)
+
•
5
!;$
7*
$#
()
!<
) *>9
**)
$32
(
$/;#3~^1$3;#0
) *%*
$!;A#$
U
B
moo/^1k
+
oq#o/^1$
*)
) *>)
*
$!;
+
J{£b! 07^1k
+
oqo#q3#!;
()
<
(
$^1$
*)
*%*
99
)
!;$
7*
$#
(!)
!<
+
K
$#
()
!<=£
9
)
~&
5
) *>9
*:*)
$3
*
$!#
(
(
$/$;$!;=
9
$01¡
6
)
!;=4$;
)
!<J{"e
)
!8
*
$!
*
8
9
$¤
# #"%82
(
$K{84#!;A07#"%$
*+
•
£b$#
(
£
9
)
2
)
!;2Y84013 ;=
)
!"%$4#"%$3#!;
*
$#
(
07#"%$/0
(
$36
)
!;=4$;
)
!<
+
$#
()
!<=£
9
)
E$< #
*
$!#
()
!<="%;$4&
$#
()
!<=£
9
)
E
)
!;$
7*
$#
()
!<="%;$4&
Table of contents
Other DW DVR manuals