Dynalink RTA1046 User manual

Configuring an RTA1046 with a TPG VoIP account.
Before proceeding you will need to complete the setup of all required hardware components as
per the User Guide that came supplied with your Dynalink RTA10 6.
1. Open up web-browser and type in 192.168.1.1 in the address bar and hit enter
2. Now enter in the modem user name password. By default the username is “admin” and the
password is “admin” without quotes).
3. Click on “Voice” on the top menu bar.

4. Now type the following information as required
•Interface ppp_8_35_1 from drop down menu)
•SIP Registrar Address aphone3.tpg.com.au
•Port 5060
•SIP Outbound Proxy aphone3.tpg.com.au
•Port 5060
•SIP Proxy Server Address aphone3.tpg.com.au
•Port 5060
•Phone Number TPG Number as advised by TPG)

•Caller Name TPG Number as advised by TPG)
•Username TPG Number as advised by TPG)
•Password TPG Password as advised by TPG)
Note: - leave rest of the setting as default settings.
5. Now click on “Apply”.
6. The RTA1046VW will now attempt to register to Exetel and you will be presented with the
following screen.

•You should now be presented with the below screen confirming that your
registration details have been successful

Congratulations, you can now start using a standard telephone handset that is connected to the
Dynalink RTA1046VW using T G’s VoI service.
Happy chatting!