
(Step(3:(Final(Assembly(
1. Connect)axle)tube)to)tongue)tube)assembly)with)the)
cross)fitting.))Make)sure)Dynamic)label)on)axle)tube)
faces)aft.)
2. For)a)quick)dolly?breakdown,)use)hex)head)bolts)and)
wing)nuts)as)shown)in)picture.)
3. Slide)wheels)onto)wheel)shafts)while)depressing)
snap)button.)
4. Wheels)can)be)secured)on)the)dolly)by)inserting)the)
enclosed)short)flat)head)machine)screws)under)the)
snap)buttons.)))
5. Tire)pressure)not)to)exceed)15)psi.))For)soft)sand)
conditions,)reduce)tire)pressure)to)increase)tire)
footprint.))
6. )Wheels&are¬&for&highway&use.)
(Step(1:((Axle(Tube(&(Wheel(Shaft(Assembly(
1. Connect)both)side)tubes)and)wheel)shafts)to)axle)tube)through)
axle)fittings.))Make)sure)the)Dynamic)label)faces)aft.)
2. Connect)sling)to)side)tubes)through)sling)fittings.)
(Step(2:((Tongue(&(Bow(Tube(Assembly(
1. Slide)aft)tongue)tube)over)splice)tube,)which)is)riveted)into)the)forward)tongue)tube,)until)
snap)button)is)engaged.)))
2. Slide)V?fitting)over)forward)tongue)tube)and)secure)in)place)with)a)hex)head)bolt)and)wing)
nut.))
3. Connect)bow)tube)to)forward)tongue)tube)through)elbow)fitting.))Make)sure)the)Dynamic)address)label)on)the)bow)
tube)faces)aft.)
4. Slide)V?fitting)over)bow)tube)and)secure)
in)place)with)hex)head)bolt)and)wing)nut.)
5. Attach)handle)fitting)to)bow)tube.)
6. Slide)handle)tube)through)handle)fitting)
until)centered.))With)the)palm)of)your)
hand,)gently)tap)both)handle)grips)onto)
handle)tube)from)both)ends.)
© Dynamic Dollies & Racks LLC
Tools(Required:))Philips)Screwdriver))
(
Wing Nuts for Quick Disconnect
401?683?0427,)275)High)Point)Ave,)Portsmouth)RI))02871)
Info@dynamicdollies.com)
)