Dynasty XJ-611 User manual

AROMA DIFFUSER
XJ-611
let
Thank you for your purchase. Before using this product, please read this manual carefully and
correctly.
The diffuser will auto off when running out of water.
Pls fill in the water to restart the diffuser.
1st press: LED lights are on and with mist come out;
2nd press: LED lights are on and with mist off;
3rd press: the diffuser is totally off.
1st press: mist come out
2nd press: mist off
1st press: Bluetooth is on
2nd press: Bluetooth is off
1st press:LED lights are on with
auto color changing
2nd press: LED lights fix one color
3rd press: LED lights are off
Voltage: DC24V-750mA
Power : 18W
Water : 140ml(MAX)
Szie : H209 W155 D123 (mm)
G.W. : 538g
Made in China
ON/OFF Buttons
LED light Buttons
Bluetooth Buttons
Mist Buttons
The diffuser will be auto off when running
out of water
Oscillator
Add 3-5 drops of essential oil on the
water tank.
MAX water Line
water outlet

Replacing the water regularly to avoid bacterial contamination which may be projected into the air.
Dynasty Home Appliance & Technology Co.,Ltd.
Shangnan industrial district, Fusha town, Zhongshan city, Guangdong, China.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
MODIFICATION: Any changes or modifications not expressly approved by the grantee of this device could void the
user’s authority to operate the device.