DZS IMACS 3000 User manual

IMACS 3000 Integrated Access Device
User Guide
June 2018
Document Part Number: 830-04264-01 version A1
Release 7.6.2

DASAN Zhone Solutions, Inc.
7195 Oakport Street
Oakland, CA 94621
USA
510.777.7000
www.dasanzhone.com
[e-mail]
COPYRIGHT ©2000-2018 DASAN Zhone Solutions, Inc. and its licensors. All rights reserved.
This publication is protected by copyright law. No part of this publication may be copied or distributed, transmitted, transcribed,
stored in a retrieval system, or translated into any human or computer language in any form or by any means, electronic,
mechanical, magnetic, manual or otherwise, or disclosed to third parties without the express written permission from DASAN
Zhone Solutions, Inc.
Bitstorm, EtherXtend, EZ Touch, IMACS, MALC, MXK, Net to Net Technologies, Paradyne, Raptor, SLMS, Z-Edge, Zhone,
ZMS, zNID and the Zhone logo are trademarks owned by DASAN Zhone Solutions, Inc.
DASAN Zhone Solutions makes no representation or warranties with respect to the contents hereof and specifically disclaims any
implied warranties of merchantability, non infringement, or fitness for a particular purpose.
Further, DASAN Zhone Solutions reserves the right to revise this publication and to make changes from time to time in the
contents hereof without obligation of Zhone Technologies to notify any person of such revision or changes.

Table of Contents 1
Table of Contents 1-
Volume 1 System Reference Guide
Chapter 1 What’s New
1.1 Product Description ........................................................................................1-1
1.1.1 CPU Card Support......................................................................................1-1
1.1.2 Interface Cards Supported in Release.........................................................1-2
1.1.3 Low interruption Cards Supported on the IMACS 3000............................1-2
1.2 System Cards ..................................................................................................1-2
1.2.1 Card Support...............................................................................................1-2
1.2.1.1 CPU XCON (CPU) ................................................................................1-3
1.2.1.2 Voice Cards............................................................................................1-3
1.2.1.3 Data Cards..............................................................................................1-4
1.2.1.4 Server Cards...........................................................................................1-4
1.2.1.5 Alarm Cards ...........................................................................................1-4
1.2.1.6 CPU Cards..............................................................................................1-4
1.2.1.7 Interface Cards .......................................................................................1-4
1.2.1.8 Power Cards ...........................................................................................1-5
1.2.1.9 WAN Cards............................................................................................1-5
1.2.1.10 Shelf Hardware.......................................................................................1-5
1.3 Customer Service and Ordering Information .................................................1-5
1.3.1 Technical support .......................................................................................1-5
Chapter 2 System Installation
2.1 Introduction ....................................................................................................2-1
2.2 User-Set Switches and Jumpers .....................................................................2-1
2.3 Chassis Installation .........................................................................................2-1
2.3.1 Unpacking the Chassis and Cards ..............................................................2-1
2.3.2 Pre-Installation Tips ...................................................................................2-1
2.3.2.1 Installation Checklist..............................................................................2-1
2.3.3 Choosing a Location for Your System.......................................................2-2
2.3.3.1 Rack Installation Tips.............................................................................2-3
2.3.3.2 Wall-Mount Installation Tips.................................................................2-3
2.3.3.3 Tabletop Installation Tips.......................................................................2-4
2.3.4 Unpacking and installing the Chassis.........................................................2-4
2.3.4.1 3000 Chassis...........................................................................................2-8
2.4 Power Supplies and Ringing Generators ........................................................2-8
2.4.1 System Power (Redundancy) .....................................................................2-8
2.4.2 -48V Talk Battery Requirement.................................................................2-8
2.4.3 Power Cards LEDs.....................................................................................2-9

2 Table of Contents
Model No.
Running Head
2.4.4 Battery Supply Fuses ............................................................................... 2-10
2.4.5 Installing the System Power Cards.......................................................... 2-10
2.4.6 Installing DC Power Supplies.................................................................. 2-10
2.5 Ringing Generator ....................................................................................... 2-11
2.5.1 Installing the Ringing Generator.............................................................. 2-11
2.6 Fan Tray ....................................................................................................... 2-12
2.6.1 Fan Tray Alarming................................................................................... 2-13
2.7 Equipment Filters ........................................................................................ 2-14
2.8 System Power and Ground Connections ..................................................... 2-15
2.8.1 Chassis Power Supplies .......................................................................... 2-15
2.9 Powering Up the System ............................................................................. 2-17
2.10 Installing the Other Plug-In Cards ............................................................... 2-17
2.10.1 Interface Cards ........................................................................................ 2-18
2.10.2 CPU Cards .............................................................................................. 2-18
2.10.3 WAN Cards ............................................................................................. 2-18
2.10.4 Server Cards............................................................................................. 2-19
2.10.5 Blank Cards.............................................................................................. 2-19
2.10.6 Connecting Cables to the Cards............................................................... 2-20
Chapter 3 IMACS 3000 Chassis Description
3.1 Introduction ................................................................................................... 3-1
3.2 Chassis ........................................................................................................... 3-2
3.2.1 3000-CHASSIS Rear Back Plane.............................................................. 3-2
3.2.2 3000-CHASSIS Front Back Plane............................................................. 3-2
Chapter 4 System Configuration and Operation
4.1 Basic Operations ............................................................................................ 4-1
4.2 Basic Screen Map and Legend ...................................................................... 4-1
4.3 System Initialization ...................................................................................... 4-2
4.3.1 Registration................................................................................................ 4-2
4.3.2 Logging Into the System............................................................................ 4-5
4.3.3 User Names, Passwords and Groups ......................................................... 4-6
4.3.3.1 User Groups........................................................................................... 4-8
4.3.4 Access Level Permissions........................................................................ 4-13
4.4 System Screens ............................................................................................ 4-15
4.4.1 System Main Screen ................................................................................ 4-15
4.4.2 CPU Card Status...................................................................................... 4-16
4.4.3 Power Supplies and Ringing Generator Card Status............................... 4-16
4.4.4 Voice and Data Card Status..................................................................... 4-16
4.4.5 Server Card Status ................................................................................... 4-17
4.4.5.1 WAN Card........................................................................................... 4-17
4.4.6 Card Main Screens................................................................................... 4-17
4.4.7 Test and Debug Screen ............................................................................ 4-19
4.4.8 Time Slot Configuration and Cross-Connect Screens............................. 4-19
4.5 Card Configuration ...................................................................................... 4-19

Table of Contents 3
4.5.1 Selecting and Configuring Your Cards ....................................................4-19
4.5.2 Recording Your Configuration Settings...................................................4-20
4.6 Reinitializing the System .............................................................................4-21
4.7 Alarms ..........................................................................................................4-22
4.7.1 Alarm Screens ..........................................................................................4-23
4.7.2 Alarm Filter Settings ................................................................................4-24
4.7.3 Alarm Modifiers.......................................................................................4-26
4.7.4 Alarm Cutoff (ACO) ................................................................................4-27
4.7.5 Backplane Out of Service (BP_OOS) ......................................................4-27
4.7.6 Alarm Handling........................................................................................4-28
4.8 Time Slot Configuration Screen ...................................................................4-29
4.9 Deleting an Out of Service Card ..................................................................4-29
4.10 Accepting New Card Settings ......................................................................4-29
4.11 Cross-Connecting (XCON) ..........................................................................4-29
4.12 System Level Maintenance ..........................................................................4-29
4.12.1 Test, Debug, Backup & Restore...............................................................4-30
4.12.2 Zipping the System...................................................................................4-30
4.12.3 Debugging the System..............................................................................4-31
4.12.4 Registering the System.............................................................................4-31
4.12.5 Pre-TFTP Backup and Restore Preparation .............................................4-31
4.12.6 TFTP Backup for 7.x.y.............................................................................4-32
4.12.7 TFTP Restore for 7.x.y.............................................................................4-32
4.12.8 ASCII Backup Procedure .........................................................................4-33
4.12.9 ASCII Restore Procedure.........................................................................4-34
4.12.10 XMODEM 128k and XMODEM 1k Backup...........................................4-34
4.12.11 XMODEM 128k and XMODEM 1k Restore...........................................4-35
4.13 Taking a Card Out of Service .......................................................................4-36
4.14 CPU Switching .............................................................................................4-36
4.15 Time Slot Assignment ..................................................................................4-36
4.15.1 Modes of Operation..................................................................................4-37
4.15.1.1 XCON Mode (XCON).........................................................................4-37
4.16 Assigning Time Slots ...................................................................................4-37
4.16.1 Assigning a Time Slot to a User Card Port ..............................................4-37
4.16.2 Assigning Multiple Time Slots to a Port..................................................4-38
4.16.3 Cross-Connect Model...............................................................................4-41
4.17 Circuit Names ...............................................................................................4-41
4.17.1 Display and Change Circuit Names .........................................................4-42
4.17.2 Backup and Restore Circuit Name Table.................................................4-46
4.17.3 SNMP.......................................................................................................4-47
4.18 DS0 Naming .................................................................................................4-47
4.19 Automatic Time Slot Assignment ................................................................4-49
4.20 Cross-Connecting WAN Time Slots ............................................................4-53
4.21 Cross-Connect Actions .................................................................................4-64
4.22 Testing Voice Cross-Connects .....................................................................4-67
4.23 Using the Broadcast Option .........................................................................4-71
4.23.1 WAN Link to WAN Link.........................................................................4-77
4.23.2 Broadcast Screen Actions.........................................................................4-77
4.23.3 Test Access Digroups (TADS).................................................................4-78

4 Table of Contents
Model No.
Running Head
4.23.4 Monitor Circuit ........................................................................................ 4-79
4.23.5 Split Circuit.............................................................................................. 4-82
4.23.6 Release..................................................................................................... 4-84
4.23.7 Terminate and Leave Access ................................................................... 4-85
4.24 Checking the Time Slot Map ....................................................................... 4-87
4.25 Recording the Time Slot Configuration ...................................................... 4-89
4.26 Redundant Operations ................................................................................. 4-91
4.27 Power Supply Redundancy .......................................................................... 4-91
4.28 CPU Card Redundancy ................................................................................ 4-93
4.29 WAN Card Redundancy .............................................................................. 4-95
4.29.1 Cross-Connect WAN Card Redundancy Switching................................ 4-95
4.30 Interface Card (IF) Redundancy .................................................................. 4-98
4.31 Server Card Redundancy ............................................................................. 4-99
4.32 System Redundancy .................................................................................... 4-99
4.32.1 Alternate Mapping Table (AMT) ............................................................ 4-99
4.32.2 Alternative Mapping Table...................................................................... 4-99
4.32.2.1 Remote AMT..................................................................................... 4-101
4.32.2.2 Active AMT....................................................................................... 4-104
4.32.2.3 ALARM FILTER TRIGGERS.......................................................... 4-105
4.32.2.4 ALARM INFORMATION................................................................ 4-107
4.32.2.5 QUICK TIPS:.................................................................................... 4-107
Chapter 5 Applications
5.1 Introduction ................................................................................................... 5-1
5.2 Voice Modules ............................................................................................... 5-1
5.2.1 Foreign Exchange Station (FXS) Card (8000-FXS-8P) ............................ 5-1
5.2.2 Foreign Exchange Office (FXO) Card (8000-FXO-8P)............................ 5-2
5.2.3 E&M Card.................................................................................................. 5-4
5.2.4 Voice Channel Bank Application .............................................................. 5-4
5.2.5 TR008 Application .................................................................................... 5-6
5.2.6 T1-E1 Conversion Application.................................................................. 5-7
5.3 Data Modules and Applications .................................................................... 5-8
5.3.1 HSU Cards................................................................................................. 5-8
5.3.2 HSU Application Example ........................................................................ 5-9
5.3.3 OHSU Card.............................................................................................. 5-10
5.3.4 SRU Card................................................................................................. 5-10
5.3.5 OCU-DP Cards ........................................................................................ 5-12
5.3.5.1 OCU-DP Card Models......................................................................... 5-12
5.3.6 DS0-DP Card........................................................................................... 5-13
5.4 ADPCM Voice Compression Server (8000-ADPCM / 887170) ................. 5-14
5.4.1 PBX to PBX Trunk Application.............................................................. 5-15
5.5 Router Server Card (8000-Router-PPP-HS) ................................................ 5-15
5.6 PWE IP Uplink Server (8000-PWE / 883570) ............................................ 5-16

Table of Contents 5
Chapter 6 System Testing and Diagnostics
6.1 Introduction ....................................................................................................6-1
6.2 Integral Test Capabilities ...............................................................................6-1
6.3 User Card Diagnostics ....................................................................................6-2
6.3.1 WAN Diagnostics.......................................................................................6-2
6.3.2 Voice Diagnostics.......................................................................................6-3
6.3.3 Data Diagnostics.........................................................................................6-3
6.4 Diagnostics at the ‘X’ Cross-Connect Option ................................................6-6
6.4.1 Circuit Diagnostics.....................................................................................6-6
6.5 Benefits of Built-In Diagnostics .....................................................................6-8
6.6 Performance Monitoring ..............................................................................6-11
6.6.1 T1 Line Performance Monitoring.............................................................6-11
6.6.2 DDS Line Performance Monitoring.........................................................6-11
Volume 2 System Cards
Chapter 7 CPU Card
7.1 Introduction ....................................................................................................7-1
7.2 CPU Card Description ....................................................................................7-1
7.2.1 CPU XCON with Ethernet Port (CPU) ......................................................7-1
7.2.1.1 Card Jumper/Switch Settings.................................................................7-2
7.2.1.2 Installing the CPU-7 XCON with Ethernet Port Card ...........................7-2
7.2.1.3 Setting Up CPU Ethernet Port................................................................7-3
7.3 CPU Card User Screens and Settings .............................................................7-5
7.3.1 CPU Card Main Screen ..............................................................................7-5
7.3.2 RADIUS Authentication ............................................................................7-6
7.3.3 User Names, Passwords and Groups..........................................................7-9
7.3.3.1 Changing Your Passwords.....................................................................7-9
7.3.3.2 Other CPU Card Settings .....................................................................7-11
7.3.4 Printing Alarms Remotely........................................................................7-13
7.4 TCP/IP Network Management .....................................................................7-18
7.4.1 SYSLOG...................................................................................................7-24
7.4.2 Network Statistics Screens .......................................................................7-29
7.4.2.1 SLIP Parameters...................................................................................7-30
7.4.2.2 FDL Parameters....................................................................................7-31
7.4.2.3 IP Parameters........................................................................................7-32
7.4.2.4 ICMP Parameters .................................................................................7-34
7.4.2.5 TCP State Parameters...........................................................................7-36
7.4.2.6 UDP Parameters...................................................................................7-39
7.4.2.7 TELNET Parameters............................................................................7-40
7.4.2.8 SNMP Parameters................................................................................7-41
7.5 IP Packet Routing .........................................................................................7-42
7.5.1 nX64 Screen .............................................................................................7-48

6 Table of Contents
Model No.
Running Head
7.5.2 Network Statistics Screen........................................................................ 7-51
7.6 CPU Host Software Upgrade Procedure ..................................................... 7-52
7.6.1 Equipment Requirements......................................................................... 7-52
7.6.2 Laptop Setup............................................................................................ 7-52
7.6.2.1 Log Upgrade Activity.......................................................................... 7-53
7.7 Upgrades ...................................................................................................... 7-53
7.7.1 Upgrades Preparation............................................................................... 7-53
7.7.2 Software Download Procedures............................................................... 7-54
7.7.2.1 High-level upgrade overview:............................................................. 7-54
7.7.3 Detailed upgrade procedure:.................................................................... 7-54
7.7.3.1 Pre-TFTP Binary Upload/Download Preparation ............................... 7-54
7.7.3.2 TFTP Protocol Bin Download............................................................. 7-55
7.7.3.3 XMODEM Protocol Binary Download............................................... 7-57
7.8 CPU Card Error Messages ........................................................................... 7-59
7.9 CPU Card Troubleshooting ......................................................................... 7-59
7.10 CPU Card Specifications ............................................................................. 7-60
Chapter 8 Interface Card
8.1 Introduction ................................................................................................... 8-1
8.2 Interface Card Descriptions ........................................................................... 8-1
8.2.1 INTF-R Ext Card Description (IF+EXT) .................................................. 8-1
8.2.1.1 Card Jumper/Switch Settings................................................................. 8-2
8.2.1.2 Installing the INTF-R Ext Card............................................................. 8-2
8.2.1.3 External Sync daughter card.................................................................. 8-2
8.2.1.4 Equipment Grounding Requirements.................................................... 8-3
8.2.2 INTF-R Modem Card Description (IF+MODEM).................................... 8-5
8.2.2.1 Card Jumper/Switch Settings................................................................. 8-5
8.2.2.2 Installing the INTF-R Modem Card...................................................... 8-5
8.2.3 INTF-R Card Description (IF)................................................................... 8-6
8.2.3.1 Card Jumper/Switch Settings................................................................. 8-6
8.2.3.2 Installing the INTF-R Card.................................................................... 8-6
8.3 Interface Card User Screens and Settings ...................................................... 8-7
8.3.1 Interface Card Main Screen....................................................................... 8-7
8.3.1.1 Setting the System Date and Time ........................................................ 8-8
8.3.1.2 Selecting the System Timing Clocks................................................... 8-10
8.3.2 Call Profile Screen................................................................................... 8-13
8.3.3 Signaling Conversion Table Screen......................................................... 8-18
8.3.4 Remote IMACS Terminal System (RITS)............................................... 8-19
8.3.4.1 Identification........................................................................................ 8-19
8.3.4.2 Network Priorities................................................................................ 8-20
8.3.4.3 Intra-Network Communications.......................................................... 8-20
8.3.4.4 Terminal Security ................................................................................ 8-21
8.3.5 Ports Screen ............................................................................................. 8-22
8.3.6 Interface Card Ports and Functionality.................................................... 8-24
8.3.7 Using the Node Port................................................................................. 8-24
8.4 Interface Card Error Messages .................................................................... 8-26

Table of Contents 7
8.5 Interface Card Troubleshooting ...................................................................8-26
8.5.1 User Interface Problems ...........................................................................8-26
8.5.2 Alarm Reporting Problems.......................................................................8-27
8.5.3 WAN Transmission Problems..................................................................8-27
8.6 Interface Card Specifications .......................................................................8-28
Chapter 9 WAN Card
9.1 Introduction ....................................................................................................9-1
9.2 WAN Card Descriptions ................................................................................9-1
9.2.1 DUAL WAN Card with CSU Support (8000-WAN-x / 801070)..............9-1
9.2.1.1 Card Jumper/Switch Settings.................................................................9-2
9.2.1.2 WAN Software Level.............................................................................9-4
9.2.1.3 WAN Software Download.....................................................................9-5
9.2.1.4 Card Jumper/Switch Settings...............................................................9-10
9.2.2 WAN-R Card Description (801460) ........................................................9-10
9.2.2.1 Card Jumper/Switch Settings...............................................................9-10
9.2.3 WAN-R Card Description (8000-WAN-R-x / 801470)...........................9-10
9.2.3.1 Card Jumper/Switch Settings...............................................................9-11
9.2.3.2 WAN Software Level...........................................................................9-11
9.2.4 Installing the WAN Cards ........................................................................9-11
9.2.4.1 WAN-rr alarms.....................................................................................9-11
9.3 WAN Card User Screens and Settings .........................................................9-12
9.3.1 T1 CSU and DSX Settings.......................................................................9-12
9.3.2 E1 CEPT Settings.....................................................................................9-22
9.3.3 Cross-Connect (XCON) ...........................................................................9-28
9.3.4 Performance Data.....................................................................................9-30
9.3.5 Far-End Performance Data.......................................................................9-33
9.3.6 Test Screen ...............................................................................................9-36
9.4 WAN Card Error Messages ..........................................................................9-39
9.5 WAN Card Troubleshooting ........................................................................9-39
9.6 WAN Card Specifications ............................................................................9-40
Chapter 10 Alarm Cards
10.1 Introduction ..................................................................................................10-1
10.2 Alarm Card Descriptions ..............................................................................10-1
10.2.1 ALR 4+4 Card Description (8000-ALARM-4P / 840160) ......................10-1
10.2.1.1 Card Jumper/Switch Settings...............................................................10-2
10.2.1.2 Installing the Alarm Card.....................................................................10-2
10.3 Alarm Card User Screens and Settings ........................................................10-3
10.3.1 Alarm Filter Screen Sensor Setting..........................................................10-3
10.3.2 ALR 4+4 Card Main Screens...................................................................10-3
10.4 Alarm Card Error Messages .........................................................................10-6
10.5 Alarm Card Troubleshooting .......................................................................10-6

8 Table of Contents
Model No.
Running Head
Volume 3 Data Cards
Chapter 11 HSU Card
11.1 Introduction ................................................................................................. 11-1
11.2 HSU Card Description ................................................................................. 11-1
11.2.1 Two-Port HSU530/35 Card Description (8000-HSU-2P)....................... 11-1
11.2.1.1 Two-Port HSU Card Jumper/Switch Settings..................................... 11-2
11.2.1.2 Installing the Two-Port HSU 530/35 Card.......................................... 11-2
11.2.2 HSU-T V11 Card Description (8000-HSU-2P-V11 / 820360) ............... 11-3
11.2.2.1 HSU-T V11 Card Jumper/Switch Settings.......................................... 11-3
11.2.2.2 Installing the HSU-T V11 Card........................................................... 11-3
11.2.3 HSU 35 Card Description (HSU-2P)....................................................... 11-3
11.2.3.1 HSU 35 Card Jumper/Switch Settings................................................. 11-3
11.2.3.2 Installing the HSU 35 Card ................................................................. 11-3
11.2.4 Four-Port HSU 530/35 Card Description (8000-HSU-4P / 821570)....... 11-3
11.2.4.1 Four-Port HSU Card Jumper/Switch Settings..................................... 11-4
11.2.4.2 Installing the Four-Port HSU 530/35 Card.......................................... 11-5
11.2.5 V.35 Personality Module (1251) ............................................................. 11-6
11.2.6 RS-232-E Personality Module Description (1253).................................. 11-7
11.2.7 HSU Card Cables..................................................................................... 11-8
11.3 HSU Card User Screens and Settings .......................................................... 11-9
11.3.1 HSU Card Main Screen ........................................................................... 11-9
11.3.2 HSU Card Test Screen........................................................................... 11-20
11.3.3 HSU Dial Screen.................................................................................... 11-25
11.4 HSU Card Error Messages ........................................................................ 11-28
11.5 HSU Card Troubleshooting ....................................................................... 11-28
11.6 HSU Card Specifications ........................................................................... 11-29
Chapter 12 OHSU-4P Card
12.1 Introduction ................................................................................................. 12-1
12.2 OHSU Alarming Capability ........................................................................ 12-1
12.3 OHSU Card Description .............................................................................. 12-2
12.3.1 Four-Port OHSU Card Description (8000-OHSU-4P)............................ 12-2
12.3.1.1 Installing the Four-Port OHSU Card................................................... 12-3
12.3.2 OHSU card cables.................................................................................... 12-3
12.4 OHSU Card User Screens and Settings ....................................................... 12-4
12.4.1 OHSU Card Main Screen ........................................................................ 12-4
12.5 OHSU Card Specification ........................................................................... 12-9
Chapter 13 LDSRU-10P Card
13.1 Introduction ................................................................................................. 13-1
13.2 LD-SRU Card Description .......................................................................... 13-1
13.2.1 LD-SRU*10 Card Description (8000-LDSRU-10P)............................... 13-2

Table of Contents 9
13.2.1.1 Card Jumper/Switch Settings...............................................................13-3
13.2.1.2 Installing the LD-SRU*10 Card...........................................................13-3
13.3 LD-SRU Card User Screens and Settings ....................................................13-4
13.4 Card Configuration Examples ....................................................................13-14
13.5 Test Screen .................................................................................................13-16
13.6 SRU Card Error Messages .........................................................................13-21
13.7 SRU Card Troubleshooting ........................................................................13-21
13.8 SRU Card Specifications ............................................................................13-23
Chapter 14 DS0-DP Card
14.1 Introduction ..................................................................................................14-1
14.2 DS0-DP Card Description ............................................................................14-1
14.2.1 DS0-DP 4 Card Description (8000-DS0DP-4P / 825460) .......................14-1
14.2.1.1 Card Jumper/Switch Settings...............................................................14-1
14.2.1.2 Installing the Card................................................................................14-1
14.3 DS0-DP Card User Screens and Settings .....................................................14-2
14.3.1 DS0-DP Card Main Screen ......................................................................14-2
14.4 DS0-DP Card Error Messages ......................................................................14-6
14.5 DS0-DP Card Troubleshooting ....................................................................14-6
14.6 DS0-DP Card Specifications ........................................................................14-7
Chapter 15 OCU-DP Card
15.1 Introduction ..................................................................................................15-1
15.2 OCU-DP Card Descriptions .........................................................................15-1
15.2.1 OCU-DP 5 Card Description (8000-OCUDP-5P / 824160).....................15-1
15.2.1.1 Card Jumpers/Switch Settings..............................................................15-1
15.2.1.2 Installing the OCU-DP 5 Card.............................................................15-1
15.2.2 OCU-DP 10 Card Description (8000-OCUDP-10P / 824660).................15-2
15.2.2.1 Card Jumpers/Switch Settings..............................................................15-2
15.2.2.2 Installing the Card................................................................................15-2
15.3 OCU-DP Card User Screens and Settings ....................................................15-2
15.3.1 OCU-DP Card Main Screen.....................................................................15-2
15.3.2 Performance Data Screen .......................................................................15-11
15.3.3 Test Screen .............................................................................................15-14
15.4 OCU-DP Card Error Messages ..................................................................15-18
15.5 OCU-DP Card Troubleshooting .................................................................15-18
15.6 OCU-DP Card Specifications .....................................................................15-19
Volume 4 Voice Cards

10 Table of Contents
Model No.
Running Head
Chapter 16 E&M Card
16.1 Introduction ................................................................................................. 16-1
16.2 E&M Card Descriptions .............................................................................. 16-1
16.2.1 E&M 2W*8 Card Description (8000-EM-2W-8P / 810860) .................. 16-1
16.2.1.1 Card Jumper/Switch Settings............................................................... 16-2
16.2.1.2 Installing the E&M 2W*8 Card........................................................... 16-4
16.2.2 E&M 4W*8 ER Card Description (8000-EM-4W-8P / 811960)............ 16-4
16.2.2.1 Card Jumper/Switch Settings............................................................... 16-4
16.2.2.2 Installing the E&M 4W*8 ER Card .................................................... 16-4
16.3 E&M Card User Screens and Settings ......................................................... 16-5
16.3.1 E&M Card Main Screen .......................................................................... 16-5
16.3.2 Test Screen............................................................................................. 16-11
16.3.3 Loopback Screen.................................................................................... 16-16
16.4 E&M Card Error Messages ....................................................................... 16-18
16.4.1 E&M Card Troubleshooting.................................................................. 16-18
16.5 E&M Card Specifications .......................................................................... 16-20
Chapter 17 FXS Card
17.1 Introduction ................................................................................................. 17-1
17.2 FXS Card Description ................................................................................. 17-1
17.2.1 FXS 2W*8-6 Card Description (8000-FXS-8P / 812960)....................... 17-1
17.2.1.1 Card Jumper/Switch Settings............................................................... 17-2
17.2.1.2 Installing the FXS 2W*8-6 Card......................................................... 17-3
17.3 FXS Card User Screens and Settings .......................................................... 17-3
17.3.1 FXS Card Main Screen............................................................................ 17-3
17.3.2 Test Screen............................................................................................. 17-13
17.4 FXS Error Messages .................................................................................. 17-18
17.5 FXS Card Troubleshooting ........................................................................ 17-18
17.6 FXS Card Specifications ........................................................................... 17-20
Chapter 18 FXO Card
18.1 Introduction ................................................................................................. 18-1
18.2 FXO Card Descriptions ............................................................................... 18-1
18.2.1 FXO 2W*8-6 Card Description (8000-FXO-8P / 813970) ..................... 18-1
18.2.1.1 Card Jumper/Switch Settings............................................................... 18-2
18.2.1.2 Installing the FXO 2W*8-6 Card ........................................................ 18-2
18.3 FXO Card User Screens and Settings .......................................................... 18-3
18.3.1 FXO Card Main Screen ........................................................................... 18-3
18.3.2 Test Screen............................................................................................. 18-11
18.4 FXO Card Error Messages ........................................................................ 18-16
18.5 FXO Card Troubleshooting ....................................................................... 18-16
18.6 FXO Card Specifications ........................................................................... 18-18

Table of Contents 11
Volume 5 Server Cards
Chapter 19 ADPCM Card
19.1 Introduction ..................................................................................................19-1
19.2 ADPCM Card Descriptions ..........................................................................19-1
19.2.1 ADPCM 64 Card Description (8000-ADPCM / 887170)........................19-1
19.2.1.1 Card Jumper/Switch Settings...............................................................19-2
19.2.1.2 Installing the ADPCM Card.................................................................19-2
19.3 ADPCM Card User Screens and Settings ....................................................19-3
19.3.1 ADPCM Card Main Screen......................................................................19-3
19.4 ADPCM Card Error Messages .....................................................................19-7
19.5 ADPCM Card Troubleshooting ...................................................................19-7
19.6 ADPCM Server Card Specifications ............................................................19-8
Chapter 20 Analog Bridging Server Card
20.1 Introduction ..................................................................................................20-1
20.2 Analog Bridging Server Card Description (8000-BRIDGE) .......................20-1
20.2.0.1 Card Jumper/Switch Settings...............................................................20-2
20.2.0.2 Installing the Analog Bridge Server Card............................................20-2
20.3 Analog Bridge Server Card User Screens and Settings ...............................20-2
20.3.1 Analog Bridge Provisioning.....................................................................20-2
20.3.2 Analog Bridge Server Card Main Configuration Screen .........................20-3
20.3.3 Port Provisioning on the Bridge ...............................................................20-5
20.3.4 All ports Screen......................................................................................20-10
20.4 Analog Bridge Server Card Specifications ................................................20-14
Chapter 21 IPR*4 Router Card
21.1 Introduction ..................................................................................................21-1
21.2 IPR*4 Router 10/100BT Card Descriptions .................................................21-1
21.2.1 IPR*4 Router Card (8000-ROUTER-PPP-HS / 883275).........................21-1
21.2.1.1 Card Jumpers/Switch Settings..............................................................21-3
21.2.2 Installing the IPR*4 Cards........................................................................21-3
21.3 IPR*4 configuration in a PPP Network ........................................................21-4
21.3.1 IPR*4 Connecting IP LANs.....................................................................21-4
21.4 IPR*4 Card Configuration Screens and Settings .........................................21-5
21.4.1 IMACS Main Screen................................................................................21-5
21.4.2 IMACS Management Through the IPR*4 Card.......................................21-6
21.4.3 IPR*4 10/100BT (ROUTER-PPP-HS) Card Main Screen ......................21-6
21.4.4 IPR*4 provisioning card setup .................................................................21-8
21.5 IPR*4 Card Download ...............................................................................21-10
21.5.1 tftp and xmodem upgrades .....................................................................21-11
21.5.2 xpress upgrade option.............................................................................21-14
21.6 IPR*4 Card Alarm and Upgrade Events ....................................................21-18

12 Table of Contents
Model No.
Running Head
21.7 IPR*4 Card Troubleshooting ..................................................................... 21-18
21.8 Introduction ............................................................................................... 21-20
21.9 IPR*4 configuration in a PPP Network ..................................................... 21-22
21.9.1 IPR*4 Connecting IP LANs .................................................................. 21-22
21.10 IPR*4PPP Configuration Screens and Settings ......................................... 21-23
21.10.1 IPR*4 10/100BT (ROUTER-PPP-HS) Card Main Screen.................... 21-23
21.10.2 IPR*4 provisioning card setup............................................................... 21-25
21.10.3 IPR*4 INTF NAME screen ................................................................... 21-26
21.10.4 IPR*4 Ethernet Connectivity Screen..................................................... 21-27
21.10.4.1 IPR*4 Ethernet Connectivity Screen - Perf....................................... 21-30
21.10.4.2 IPR*4 Ethernet Connectivity Screen - ARP...................................... 21-30
21.10.5 IPR*4 Port Screen.................................................................................. 21-31
21.10.6 IPR*4 Static Route Screen..................................................................... 21-35
21.11 IPR*4 Server Card Specifications ............................................................. 21-37
Chapter 22 PWE Card
22.1 Introduction ................................................................................................. 22-1
22.2 PWE Card Description ................................................................................ 22-1
22.2.1 PWE Card Description............................................................................. 22-1
22.2.1.1 Card Jumper/Switch Settings............................................................... 22-2
22.2.1.2 Faceplate Descriptions......................................................................... 22-3
22.2.1.3 Installing the Card ............................................................................... 22-4
22.3 PWE Card User Screens and Settings ......................................................... 22-4
22.3.1 PWE Card Main Screen........................................................................... 22-4
22.3.2 Main Screen Option Settings................................................................... 22-7
22.4 PWE Card Error Messages ........................................................................ 22-15
22.5 PWE Card Troubleshooting ....................................................................... 22-16
22.5.1 No communications with the far end..................................................... 22-16
22.5.2 Clock failing to lock .............................................................................. 22-17
22.5.3 Excessive errors in data services / excessive voice echo....................... 22-17
Volume 6 Appendices
Appendix A System Standards and Specifications
A.1 Introduction ...................................................................................................A-1
A.2 Standards Compatibility ................................................................................A-2
A.3 Chassis Standards ..........................................................................................A-9
A.3.1 Dimensions ................................................................................................A-9
A.3.2 Chassis Power..........................................................................................A-10
A.3.3 Environment.............................................................................................A-10
A.3.3.1 Ambient Temperature and Humidity...................................................A-10
A.3.3.2 Altitude................................................................................................A-11

Table of Contents 13
A.3.3.3 Airflow................................................................................................A-11
A.3.3.4 Fire Resistance ....................................................................................A-11
A.3.4 Equipment Handling................................................................................A-11
A.3.4.1 Packaged Equipment Shock Criteria...................................................A-11
A.3.4.2 Unpackaged Equipment Shock Criteria..............................................A-11
A.3.5 Earthquake, Office Vibration and Transportation Vibration...................A-11
A.3.5.1 Earthquake...........................................................................................A-11
A.3.5.2 Office Vibration ..................................................................................A-11
A.3.5.3 Transportation Vibration.....................................................................A-12
A.3.6 Cable/Power Connections .......................................................................A-13
A.3.7 Mounting .................................................................................................A-13
A.3.7.1 Types...................................................................................................A-13
A.3.7.2 Clearance.............................................................................................A-13
A.3.8 Number of Slots.......................................................................................A-14
A.4 System Power Supplies and Converters ......................................................A-15
A.4.1 Power Supply Compatibility ...................................................................A-17
A.4.2 External Talk Battery Fuses ....................................................................A-17
A.5 Card Specifications .....................................................................................A-18
A.5.1 Current in milliamperes, weight and power consumption.......................A-18
A.5.2 Pre-Installation Card Setup......................................................................A-19
A.6 FCC Requirements ......................................................................................A-20
A.7 UK Requirements .......................................................................................A-21
A.8 Year 2000 Compliance ................................................................................A-21
A.8.1 Service requirements ...............................................................................A-21
A.9 Safety Information and Precautions ............................................................A-22
A.9.1 Disclaimer for Shielded Cables...............................................................A-23
A.9.2 Panel and Cover Removal.......................................................................A-23
A.9.3 Power Source...........................................................................................A-24
A.9.4 Fusing ......................................................................................................A-24
A.10 Power Supply Safety Information ...............................................................A-24
A.10.1 Grounding................................................................................................A-24
A.10.2 Electrostatic Discharge Prevention..........................................................A-25
A.10.3 Operator Services Requirements.............................................................A-25
A.11 Regulatory Compliance Information ...........................................................A-25
A.11.1 CAN/CSA C22.2 No. 60950...................................................................A-25
Appendix B Error Messages
B.1 Error Messages Introduction .........................................................................B-1
Appendix C Pinouts
C.1 Introduction ...................................................................................................C-1
C.2 CPU Card ......................................................................................................C-2
C.2.1 CPU Card (CPU).......................................................................................C-2
C.2.1.1 CPU External Connector and Pinouts...................................................C-2
C.3 Interface Cards ..............................................................................................C-4

14 Table of Contents
Model No.
Running Head
C.3.1 INF-R EXT Card (IF+EXT) ......................................................................C-4
C.3.1.1 INF-R External Connector and Pinouts.................................................C-4
C.3.2 INF-R MODEM Card (IF+MODEM).....................................................C-12
C.3.2.1 INF-R MODEM Card External Connector and Pinouts......................C-12
C.3.3 INF-R Card (IF).......................................................................................C-19
C.3.3.1 INF Card External Connector and Pinouts..........................................C-19
C.4 Alarm Cards .................................................................................................C-25
C.4.1 ALR 4+4 Card (ALARM-4P)..................................................................C-25
C.4.1.1 ALR 4+4 Card External Connectors and Pinouts................................C-25
C.5 E&M Cards ..................................................................................................C-26
C.5.1 E&M-2W-8P Card (810860) ...................................................................C-26
C.5.1.1 E&M 2W*8 Card External Connectors and Pinouts...........................C-26
C.5.2 E&M-4W-8P Card (811960) ...................................................................C-27
C.5.2.1 E&M 4W*8ER Card External Connectors and Pinouts......................C-27
C.6 FXS Cards ....................................................................................................C-29
C.6.1 FXS-8P Card (812960)............................................................................C-29
C.6.1.1 FXS 2W*8-6 Card External Connectors and Pinouts .........................C-29
C.7 FXO Cards ...................................................................................................C-30
C.7.1 FXO-8P Card (813970) ...........................................................................C-30
C.7.1.1 FXO 2W*8-6 Card External Connector and Pinouts ..........................C-30
C.8 HSU Cards ...................................................................................................C-31
C.8.1 HSU 35 Card (HSU-2P) ..........................................................................C-32
C.8.1.1 HSU 35 Card External Connectors and Pinouts..................................C-32
C.8.2 Four-Port HSU 530/35 Card (HSU-4P)...................................................C-33
C.8.2.1 Four-Port HSU 530/35 Card External Connectors and Pinouts ..........C-33
C.8.3 HSU Card Cables.....................................................................................C-35
C.9 OHSU Card ..................................................................................................C-37
C.9.1 OHSU 4-Port Card (8000-OHSU-4P / 823875) ......................................C-37
C.9.1.1 OHSU Card External Connector and Pinouts......................................C-37
C.10 SRU Cards ...................................................................................................C-39
C.10.1 SRU-LD*10 Card (8000-LDSRU-10P / 822570) ...................................C-40
C.10.1.1 SRU-LD*10 Card External Connector and Pinouts............................C-40
C.11 OCU-DP Cards ............................................................................................C-42
C.11.1 OCU-DP 5 Card (OCUDP-5P)................................................................C-42
C.11.1.1 OCU-DP 5 Card External Connectors and Pinouts.............................C-42
C.11.2 OCU-DP 10 Card (OCUDP-10P)............................................................C-44
C.11.2.1 OCU-DP 10 Card External Connectors and Pinouts...........................C-44
C.12 DS0-DP Cards .............................................................................................C-46
C.12.1 DS0-DP 4 Card (DS0DP-10P).................................................................C-46
C.12.1.1 DS0-DP 4 Card External Connector and Pinouts................................C-46
C.13 Server Cards ................................................................................................C-48
C.13.1 MCC Server Card (881360).....................................................................C-48
C.13.1.1 ACS-MCC External Connectors and Pinouts......................................C-48
C.13.2 IPR*4 10/100 BT Card (ROUTER-PPP-HS)..........................................C-49
C.13.2.1 IPR*4 10/100 BT Card External Connectors and Pinouts ..................C-49
C.13.3 PWE Mapper Card (8000-PWE / 883570)..............................................C-50
C.13.3.1 PWE IP Uplink Mapper Card External Connectors and Pinouts ........C-50

Table of Contents 15
Appendix D Node Management Provisioning Examples
D.1 Introduction ...................................................................................................D-1
D.1.1 Remote Management of IMACS using the E1 SA4 bit ............................D-1
D.1.1.1 Setting up the Local IMACS to Provide Remote Access......................D-2
D.1.1.2 Setting up the Remote IMACS to Provide Remote Access..................D-3
D.1.2 Remote Management of an IMACS Using DS0 Daisy-Chaining.............D-4
D.1.2.1 Setting up the Local IMACS for Ethernet Hosting...............................D-4
D.1.2.2 Setting up the Transport IMACS for DS0 Daisy-Chaining ..................D-5
D.1.2.3 Setting up the Termination IMACS for DS0 Daisy-Chaining..............D-6
Appendix E Glossary
INDEX 1

16 Table of Contents
Model No.
Running Head

List of Figures 13-
2-1 Front of IMACS 3000 with shipping plates......................................................................... 2-4
2-2 Rear of IMACS 3000 with shipping plates.......................................................................... 2-5
2-3 Chassis side mounting holes ................................................................................................ 2-6
2-4 Mounting Bracket................................................................................................................. 2-6
2-5 Rear Power Supply Quadrant............................................................................................... 2-9
2-6 IMACS 3000 100 Watt DC power Supply ........................................................................ 2-11
2-7 105V Ringing Generator.................................................................................................... 2-12
2-8 3000 Chassis Fan Tray....................................................................................................... 2-13
2-9 Equipment Air Filter .......................................................................................................... 2-14
2-10 3000 Chassis with only one Power Source........................................................................ 2-16
2-11 3000 Chassis with dual Power sources .............................................................................. 2-17
2-12 IMACS 3000 Card Blank................................................................................................... 2-20
3-1 Chassis Rear (3000-CHASSIS)............................................................................................ 3-2
3-2 Chassis Front (3000-CHASSIS) .......................................................................................... 3-2
3-3 Chassis Views ...................................................................................................................... 3-3
3-4 External Power Feeds for the 3000-CHASSIS .................................................................... 3-4
4-1 First Time Registration Screen............................................................................................. 4-2
4-2 First Time Login Screen....................................................................................................... 4-3
4-3 Welcome to Registration Screen.......................................................................................... 4-3
4-4 Selecting Chassis Type Screen............................................................................................. 4-4
4-5 Testing and Initialization Screen.......................................................................................... 4-4
4-6 Typical Login Screen........................................................................................................... 4-5
4-7 3000 Shelf Main Screen.......................................................................................................4-6
4-8 CPU screen - userNames option .......................................................................................... 4-7
4-9 User Name Screen.............................................................................................................. 4-10
4-10 Adding a User .................................................................................................................... 4-11
4-11 Login Log Sample Display ................................................................................................ 4-12
4-12 Group Permissions Settings ............................................................................................... 4-13
4-13 Typical Card Status Display............................................................................................... 4-17
4-14 Typical Card Main Screen ................................................................................................. 4-18
4-15 Cold-Start NVRAM Test Screen. ...................................................................................... 4-22
4-16 Typical Alarm Screen ........................................................................................................4-23
4-17 Alarm Filters Screen .......................................................................................................... 4-24
4-18 Typical Alarm History Screen ........................................................................................... 4-28
4-19 System Test and Debug Screen.......................................................................................... 4-30
4-20 Zip Screen .......................................................................................................................... 4-30
4-21 Typical E&M Card Time Slot Assignments...................................................................... 4-38
4-22 Typical 2-Port HSU Card Time Slot Assignments for T1................................................. 4-39
4-23 Typical 4-Port HSU Card Time Slot Assignments for E1................................................. 4-40
4-24 Cross Connect Screen ........................................................................................................4-42
4-25 Cross Connect Screen -View All ....................................................................................... 4-43
4-26 Cross Connect Circuit (Rename) ....................................................................................... 4-43
4-27 Cross Connect Rename Circuit (Saving) ........................................................................... 4-44
4-28 WAN Cross Connect Screen.............................................................................................. 4-44
4-29 WAN Cross Connect Screen (Rename)............................................................................. 4-45
4-30 Cross Connect Screen (Rename Displayed) ...................................................................... 4-45

4-31 NVRAM Backup Screen.................................................................................................... 4-46
4-32 NVRAM Restore Screen.................................................................................................... 4-47
4-33 E&M Provisioning screen.................................................................................................. 4-48
4-34 Name screen....................................................................................................................... 4-48
4-35 Automatic Time Slot Assignment Example....................................................................... 4-49
4-36 Typical Card Slot and Type Selection ............................................................................... 4-50
4-37 Typical WAN Card Selection ............................................................................................ 4-50
4-38 Typical System Main Screen with Alarms......................................................................... 4-51
4-39 Typical WAN Time Slot Assignment Screen.................................................................... 4-52
4-40 Typical CPU Cross-Connect Screen.................................................................................. 4-53
4-41 Add a Cross-Connect Circuit Screen ................................................................................. 4-53
4-42 New Circuit Selection and ID Assignment........................................................................ 4-55
4-43 WAN Unit Options ............................................................................................................4-56
4-44 Time Slot and Bandwidth Options..................................................................................... 4-57
4-45 Test Options ....................................................................................................................... 4-58
4-46 Cross-Connect Circuit Type Selection............................................................................... 4-59
4-47 Trunk Conditioning Option Selection................................................................................ 4-60
4-48 Signaling Bit Pattern Selection .......................................................................................... 4-61
4-49 Voice Options Screen......................................................................................................... 4-61
4-50 Selecting PCM Conversion................................................................................................ 4-62
4-51 Selecting Signaling Conversion......................................................................................... 4-63
4-52 Typical Completed Circuits ............................................................................................... 4-63
4-53 Updated WAN Card Screen............................................................................................... 4-65
4-54 Delete Cross-Connection Screen........................................................................................ 4-66
4-55 Typical Message on a CPU Cross-Connect Screen ........................................................... 4-67
4-56 Highlighted Circuit on a WAN Cross-Connect Screen...................................................... 4-68
4-57 Typical Test Screen and ABCD Bit Options ..................................................................... 4-69
4-58 Voice Test Diagram ........................................................................................................... 4-70
4-59 Typical Main Cross-Connect Screen ................................................................................. 4-72
4-60 Typical All Circuits Screen................................................................................................ 4-73
4-61 Typical Add Broadcast Screen........................................................................................... 4-74
4-62 Typical "To" Destination Selection.................................................................................... 4-75
4-63 Typical Time Slot Selection............................................................................................... 4-76
4-64 Typical Complete Broadcast Circuit.................................................................................. 4-76
4-65 The TADS screen............................................................................................................... 4-78
4-66 The Add Monitor Circuit Screen........................................................................................ 4-79
4-67 Completed Monitor Circuit................................................................................................ 4-80
4-68 Monitor Circuit Diagram.................................................................................................... 4-81
4-69 TADS Screen with Split Circuits....................................................................................... 4-82
4-70 Split Circuit Diagram......................................................................................................... 4-83
4-71 TADS Restore Circuit Screen ............................................................................................ 4-84
4-72 TLA Circuit State Screen................................................................................................... 4-85
4-73 Typical Time Slot Screen for T1 Operation....................................................................... 4-87
4-74 Typical Time Slot Screen in E1 Operation ........................................................................ 4-88
4-75 Typical Redundant-Power Supply System Main Screen ................................................... 4-92
4-76 Manually Switching to a Redundant CPU ......................................................................... 4-93
4-77 Typical System with CPU Switchover Completed............................................................ 4-94
4-78 Typical Cross-Connect System with WAN Card Redundancy.......................................... 4-96
4-79 Switching to a Redundant Cross-Connect WAN Card...................................................... 4-97
4-80 WAN Redundancy Switch active - WAN RR alarm ......................................................... 4-98