Earthlite Everest User manual

Everest Lift Table
USER MANUAL
1-400-0011 • Rev D • 4/30/19
© Earthlite 2019, All Rights Reserved
*tables shown with op onal accessories and/or fi nishes
Everest
Everest Spa
Everest Eclipse
Everest EclipseEverest Eclipse

© Copyright 2019
Earthlite®
All rights reserved. is document or
any portion thereof may not be repro-
duced in any way, including photocopy-
ing or translation to another language
without the prior written permission
from Earthlite.
Earthlite® is a registered trademark of
Earthlite, LLC.
Legal Notice
e information provided in this document is intended
for informational purposes only and is subject to change
without notice. e information provided in this docu-
ment should not be construed as a commitment by
Earthlite®.
Earthlite® assumes no responsibility for the accuracy or
suitability of the information contained in this docu-
ment. is document may contain technical inaccura-
cies or errors. Earthlite® makes no expressed or implied
warranties of any kind concerning the information con-
tained in this document, including, but not limited to,
the implied warranties of merchantability and tness for
purpose.
Earthlite® shall not be liable for incidental or consequen-
tial damages in connection with or arising out of the
product, performance, or use of this document and the
information and material it describes.

Introduction
Congratulaons on your purchase of the mul-funconal Everest li table. The Everest has
been designed for maximum comfort and to meet the specic posioning needs of your clients.
The elegant single column design of the Everest and Everest Spa allows for plenty of clearance
underneath the table for leg and knee room, while sll providing exceponal strength. The
Everest Eclipse adds a beauful hardwood cabinet, providing a more custom and upscale look.
Everest tables are designed for licensed therapists and are intended to be used in a professional
spa, massage studio, or similar commercial environment. While no special training is needed to
operate the table, for safety reasons it is important that the instrucons contained in this manual
are reviewed in detail before the rst use. This manual should be read in its enrety by each
professional who will be operang the table to ensure the safety of both operator and client. This
manual should be saved for future reference.
The Everest table should not be used in any other manner than described in this manual.
Please read, understand, and follow all safety warnings, labels, and instrucons. Misuse, use of
unnecessary force, or using the product for unintended or unauthorized procedures can result in
injury to operator, client, and/or equipment.
Detailed instrucons for use and maintenance can be found in this user manual. If you have
further quesons, please contact us at [phone] for US customers, or [phone] for
internaonal customers. We can also be reached via e-mail at inf[email protected].
Secon 1: Safety Informaon
Safety Symbols
Warnings
Secon 2: Product Overview
Product Photos
Product Specicaons
Secon 3: Installaon
Moving Your Table
Basic Setup
Leveling Instrucons
Secon 4: Operang Instrucons
Weight/Li Capacies
Electrical Specicaons
Key Lockout
Hand/Foot Control
Pneumac Adjustments
Manual Adjustments
LED Chroma Lighng
Secon 5: Care & Maintenance
Care Instrucons
Troubleshoong
Warranty Informaon
Contact Us
2
2-3
4
4
5
5
5
6
7
7
8
9
10
10
11
12
13
Table of Contents
back cover

READ AND SAVE THESE INSTRUCTIONS
2
IMPORTANT SAFETY INSTRUCTIONS - FOR COMMERCIAL USE ONLY
Read all instructions before using this product.
Safety Symbols
Familiarize yourself with the following
Safety & Warning symbols. They are
designed to prevent damage and injury to
you, your clients, and your new Earthlite
product.
IMPORTANT: The important safety
instructions and warnings in this manual
cannot cover all possible problems and
conditions that can occur. Use common
sense and caution when installing,
operating, or maintaining this appliance.
Indicates an imminently hazardous
situation which could result in serious
or fatal injury.
Indicates a potentially hazardous
situation which could result in serious
injury.
Indicates a potentially hazardous
situation which could result in
equipment damage and/or injury.
SECTION 1: SAFETY INFORMATION
1) Always unplug this furnishing from the electrical outlet before servicing.
2) Never use this furnishing if it has a damaged cord or plug, if it is not working properly, if it has been
dropped or damaged, or dropped into water. Return the furnishing to a service center for examination
and repair.
3) Keep the cord away from heated surfaces.
4) Do not use outdoors.
5) Do not operate where aerosol (spray) projects are being used or where oxygen is being administered.
6) To disconnect, turn all controls to the off position, then remove plug from outlet.
7) Connect this furnishing to a properly grounded outlet only. See Grounding Instructions.
RISK OF ELECTRIC SHOCK, FIRE, AND EXPLOSION
INTERNATIONAL VERSIONS ONLY
This product is for use on a nominal 220V-240V cir-
cuit and has a grounding plug (plug type varies by
country). Make sure that the product is connected
to an outlet having the same conguration as the
plug. No adapter should be used with this product.
NORTH AMERICA ONLY
Grounded
Outlet Box
Grounded Outlet
Grounding Pin
GROUNDING INSTRUCTIONS:
POWER SUPPLY: (120V AC grounded) Electrical limitations: Do not use extension cord with this product, plug
directly into grounded outlet. This product must be grounded. If it should malfunction or breakdown, grounding
provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped
with a cord having an equipment-grounding conductor and a grounding plug. This three prong grounded plug
will only t into wall outlet one way. If the plug does not t fully in the outlet, contact a qualied electrician to
install the proper outlet. Do not change the plug in any way.

READ AND SAVE THESE INSTRUCTIONS 3
1) When lowering any section of the table, make sure that no supplies or any part of yours or your
client’s body is between the top of your table and its base. This could result in injury, or could
damage your table as well as the item. It is recommended that you always return your table top
to the lowest at position to avoid leaving the base exposed.
2) When lowering the table height, be sure there are no foreign obstacles are underneath your table
that could obstruct it from lowering completely. This could damage your table.
3) Never set anything under the table frame to avoid collision if lowered.
4) Never operate your table on an uneven surface. Adjust the leveling feet so that your table is stable.
5) Never raise the head or leg section with a client in the prone position (face down.)
6) Never use or store your table in a wet or very humid environment. Water and excessive moisture
can damage the wood cabinet and electrical components. Evidence of exposure to water or
moisture will void your warranty.
7) If you have purchased the Flexible Armrest Option, never use the Armrests as handholds or body
support mechanisms, especially when setting clients on or off the table.
8) Never drop or insert any object into any opening.
SECTION 1: SAFETY INFORMATION
1) Use this furnishing only for its intended use as described in these instructions. Do not use
attachments not recommended by the manufacturer.
2) Do not operate this equipment unless properly trained.
3) Install this furnishing in treatment area not accessible to the public.
4) Close supervision is necessary when this furnishing is used by, or near children, invalids, or disabled
persons.
5) This product does not have “pinch point” protection. Only operate when no possibility of any portion
of the body could be caught and injured while moving the table top upward/downward, or activating
the back/foot tilt.
6) Do not use this furnishing to support video equipment such as televisions or computer monitors.
7) Never attempt to use the Head or Leg lift section to support concentrated weight such as sitting
or standing
To reduce the risk of burns, re, electric shock, or injury to persons:

Everest Everest Spa Everest Eclipse
Product
Image*
Available
Tops
Flat, Manual Tilt,
Pneuma c Tilt,
Pneuma c Salon,
Electric Tilt, Electric Salon
Flat, Manual Tilt,
Pneuma c Tilt,
Pneuma c Salon,
Electric Tilt, Electric Salon
Flat, Manual Tilt,
Electric Tilt, Electric Salon
Top Length 73” 73” 73”
Top Width 28”, 30”, or 32” 28”, 30”, or 32” 28”, 30”, or 32”
Top
Cushioning 3” Deluxe Pro-Plush™ 3” Deluxe Pro-Plush™ 3” Deluxe Pro-Plush™
Top Corner
Style Round Square Square
Height
Range
Manual: 24” - 40”
Pneuma c Tilt: 25” - 41”
Flat: 24” - 40”
Manual: 24” - 40”
Pneuma c Salon: 26” - 42”
Electric Tilt: 26” - 42”
Manual: 24” - 40”
Pneuma c Salon: 26” - 42”
Electric Tilt: 26” - 42”
Base Heavy duty steel Heavy duty steel with
hardwood Maple trim
Hardwood cabinet base
with 2 drawers
Base
Size 44” L x 22” W 47.5” L x 20.5” W 56.25” L x 26.5” W x 15.75” H
Base Finish White Natural Maple
(Other colors op onal)
Black
(Other colors op onal)
Li System Heavy duty 3 stage li
column
Heavy duty 3 stage li
column
Heavy duty 3 stage li
column
Li
Capacity 600 lbs 600 lbs 600 lbs
Upholstery Naturso ™ Naturso ™ Naturso ™
SECTION 2: PRODUCT OVERVIEW
*All tables shown with op onal accessories and/or fi nishes.
Measurements may vary due to natural material varia ons.
4

5
SECTION 3: INSTALLATION
Your Everest table comes completely assembled and ready to use.
Once the table is unpacked, follow the “Moving Your Table” instruc ons below.
Moving Your Table
without using proper safety procedures/equipment. DO NOT turn the table on its side for any
reason. Li your table by grasping  rmly from the bo om of the metal frame underneath the
upholstered top. Do not try to li from the upholstered top.
CAUTION
Your Everest table is very heavy - extreme cau on should be used to avoid
injury to yourself, others around you, and your table. DO NOT li or move
Basic Setup Instructions
Once your Everest table is posi oned for use, follow these steps:
• Plug the power cord into a grounded outlet that is properly rated for the table.
• Arrange and secure the power cord so it will not create a tripping hazard.
• Place the hand and foot controls in loca ons where they are safe and accessible.
• Ensure the controls are not in danger of being crushed by the li or  lt mechanisms.
• Follow the “Leveling Your Table” instruc ons on the next page.
Leveling Your Table
Leveling, or balancing, your table is very important during ini al setup and rou ne maintenance.
Your Everest table is equipped with leveling feet that can adjust to uneven fl oors.
To adjust the leveler feet:
1. Place the table in the posi on you plan to use it.
2. To determine which foot needs adjus ng, a empt to “rock” your table. If there is any
movement, the leg that is li ing is the one that will need adjus ng.
4. Using your hand, or a wrench if necessary, turn the leveling foot in the needed direc on.
(Counterclockwise will lower the overall height, clockwise will raise the overall height)
Table Accessories
All Everest tables come with outlets at both ends, speci cally designed for providing a  xed
loca on for FacePillow pla orms, salon headrest, and other accessories.
See the Earthlite website for all available accessories that
will  t into the table outlets.
Be certain to arrange the power cord and foot control so they will not
create a tripping hazard, and will not be in the path of moving parts.

SECTION 4: OPERATING INSTRUCTIONS
6
Weight & Lift Capacities
The Everest is powered by a heavy-duty 3-stage li column. The
recommended li capacity for all Everest tables is 600 lbs.
600 lbs.
The (oponal) back and leg secon has a maximum weight
capacity of 50 lbs. These secons are not meant to hold full body
weight.
50 lbs.
Always use extreme cauon when making any posion adjustments to
your table. Ensure all body parts and objects are clear from all moving parts.
The described adjustments can be done with a client on the table, but use
cauon to ensure that the client’s weight is supported while posioning the
table secon(s).
Do not sit or put unnecessary amounts of pressure
on the back secon of the table when it is in lt
posion of any level. This can damage or destroy the
lt mechanism and cause harm or bodily injury to
persons. The lt mechanism is intended solely to be
used when a client is properly seated or laying on the
table top. Damage caused in this manner may void
the warranty.
Do not sit or put unnecessary amounts of pressure
on the leg secon of the table when it is in lt
posion of any level. This can damage or destroy the
lt mechanism and cause harm or bodily injury to
persons. The lt mechanism is intended solely to be
used when a client is properly seated or laying on the
table top. Damage caused in this manner may void
the warranty.
Important Safety Notes
DO NOT store or place anything under the backrest - this can damage the
top and/or lng mechanism and will void your warranty. This area is not
designed for storage or as an area to hold accessories and/or massage
supplies while performing any type of service.
DO NOT store or place anything between the table and the base - this can damage
the table and/or base and will void your warranty. The base of the table is not
designed for storage or as an area to hold accessories, including foot pedal.

SECTION 4: OPERATING INSTRUCTIONS
China
220V AC
PLUG DESCRIPTION
120V AC 220V AC 220V AC
NORTH AMERICA UK / MIDDLE EAST EUROPEASIA
Electrical Specications
Spec North America Europe/Asia
Input Voltage 120 VAC 220 VAC
Input Frequency 60 Hz 50 Hz
Consumpon 2.5 Amps, 287.5 Was 1.3 Amps, 287.5 Was
Output 32 VDC 32 VDC
Duty Cycle 10%, 2 min/18 min 10%, 2 min/18 min
Key Lockout (ETL Option Only)
If ordered, your table is equipped with a safety lockout. The table will only operate when
the magnec “key” is inserted into the lock. Remove key when table is not in use to prevent
unauthorized use and potenal injury. Located in head secon cabinet.
Note: ETL opon is not available for electric lt and electric salon tops
Table will only operate when
magnetic “key”is inserted as shown
Conforms to
UL STD 962
Certied to
CSA STD C22.2
No. 68
5003418
SAFETY ZONE - The treatment area must have 3- minimum
unobstructed clearance around the enre table. Posng a noce is
recommended to maintain the “Safety Zone Clearance”. The designated
work area around the table should be clearly marked o.
7

8
SECTION 4: OPERATING INSTRUCTIONS
Foot Control Operation
Lower Entire
Table
Raise Entire
Table
Your Everest foot control is already connected and ready for use. The foot control allows
you to simply raise and lower the table, allowing convenient hands-free adjustments.
Hand Control Operation (Electric Tilt/Salon Only)
Raise Back Section Lower Back Section
Lower Leg Section
(Salon Only)
Lower Entire Table
Raise Leg Section
(Salon Only)
Raise Entire Table
Your Everest hand control is already connected and ready for use. See below for a
descripon of each buon’s funconality.

Raise Entire
Table
SECTION 4: OPERATING INSTRUCTIONS
9
Pneumatic Back Tilt (Optional on Selected Models)
Step 1
Locate the pneumatic back tilt
handle, which is located on the
right side under the back tilt.
Step 2
The handle is set to the locking
position.
Step 3
Squeeze / press the handle to
release the pneumatic assist,
which allows you to move the
back tilt up or down.
Step 4
With the handle squeezed /
pressed, move the back tilt to
the desired level and release the
handle. It will lock in place.
Step 1
Locate the pneumatic leg break
control, which is located under
the front section of the table.
Step 2
The handle is set to the locking
position.
Step 3
Squeeze/press the handle to
release the pneumatic assist,
which allows you to move the
back tilt up or down.
Step 4
With the handle squeezed/
pressed, move the back tilt to
the desired level and release the
handle. It will lock in place.
Pneumatic Leg Section (Optional on Selected Models)
Note: the above images are for instructional purposes only - your table/base style may

10
SECTION 4: OPERATING INSTRUCTIONS
Step 1
To tilt the back section upward
from its at position, carefully
place both hands underneath the
rear edge of the upholstered top
of the tilt section, as pictured.
Step 2
Lift the tilt section of the table to
the desired level. The tilt section
will automatically ‘click’ into
position as you lift upward.
Step 3
To return to a at position,
release the locking mechanism
by lifting the back section all the
way forward past 90º, until the
locking mechanism releases.
Step 4
Once the locking mechanism is
released, lower the tilt section
until it is at (1), then lift again to
another desired angle (2).
Manual Back Tilt (Optional on Selected Models)
LED Chroma Lighting Hand Control Operation (Eclipse Only)
With the remote, you can change the color to any one of 16 colors, or use the preset color
changing paerns. See below for instrucons on how to use the included remote control:
This secon of buons
will turn the LEDs to a
solid color of your choice
These two buons
adjust the dimming
On/O Controls
Flashes a variety of colors
Flashes white
Smoothly fades all colors
Flashes red, green, blue
Warming Drawer Operation (Optional for Eclipse)
IMPORTANT: Please refer to separate Warming Drawer User Manual for safety warnings
and instrucons for use. If you did not receive one, contact Earthlite Customer Service
before use to be sent an electronic copy.
Note: the above images are for instructional purposes only - your table/base style may

11
SECTION 5: CARE & MAINTENANCE
DO NOT USE acetone, “Armor All” type cleaners, citrus-based cleaners,
or industrial cleaners. These can seriously damage the upholstery. Such
damage would not be covered under warranty.
RISK OF ELECTRIC SHOCK
Always unplug this furnishing from the electrical outlet before cleaning.
With proper maintenance, your table is designed to give you years of trouble-free operaon.
To ensure your table will connue to funcon properly and keep its appearance, we
recommend the following.
Cleaning & Ongoing Maintenance
Upholstery
Steel
Table Frame
Electronic
Components
Lubrication
& Mechanical
Remove day-to-day dirt with a mild soap and warm
water solution. For tough stains and to disinfect, use
a 15:1 water to bleach solution. Always rinse surface
with clean water, and then gently wipe the upholstery.
Allow upholstery to air dry before using or storing.
Do NOT use Armor All® or citrus-based cleansers. For
best results, use only the products suggested above.
Alternative cleansing methods may cause serious
damage to your table. Such damage would not be
covered under the Earthlite warranty program.
The powder coated steel frame can be kept clean with
a mild detergent and warm water mix. Periodically
remove dust from frame with a dry, soft cloth.
Anti-static electronic aerosol dusters can be used to
keep the surfaces of electronic components, power
cables, and plugs free of dust.
If necessary, lubricate wheel joints, casters, foot
glide levelers, ball joints, and other mechanical
parts with a light machine oil. Periodically check
table and ensure all bolts remain tightened.
• Table Bed Surface
• Flex-Armrests
• Headrest Cushion
• Salon Pillow
• Bolsters
• Main Steel Frame
and Legs
• Foot Controls
• Hand Controls
• Motors
• Power Cables
• Plugs
• Wheel Joints
• Casters
• Foot Glide Levelers
• Ball Joints, etc.
RecommendationCategory Application

12
This helpful troubleshoong guide will provide you with informaon about how to recognize a
problem with your table, determine possible causes, and nd a soluon.
In the event your specic situaon is not covered in this guide, please contact Earthlite so our
technical support department can assist you. Beyond the troubleshoong guide below, do not
aempt to repair the table yourself. This can void your warranty.
Unauthorized service will not be covered. Please be sure to contact Earthlite Customer Service
rst at [phone], [phone] Int’l.
Troubleshooting
Issue Solution
Table does not
raise or lower
1. Ensure the table is plugged in.
2. If using a dimmer switch, ensure it is turned to full power.
3. Ensure the outlet in your room is receiving power. This can be done
by plugging in a small appliance and turning it on.
4. Ensure the switch on the aached power strip is turn on.
5. Check the fuse or circuit breaker for blown fuse or tripped breaker.
6. Ensure the controls are securely plugged into the juncon box.
One-Touch Lever
is dicult to
move
Check the cable for any kinks or sharp bends from the lever to the gas
springs. The cable should have a so radius in order to allow the inner
cable to travel freely in the cable sheath. If the cable is kinked, contact
Earthlite.
SECTION 5: CARE & MAINTENANCE

13
SECTION 5: CARE & MAINTENANCE
Absolute Satisfaction Return Policy
If you are not completely sased with your Earthlite portable table, chair, or accessory, you
may return it within thirty (30) days for a full refund (excluding shipping & handling charges
on the original order). Standard staonary and li tables may be returned within thirty (30)
days for a refund (excluding shipping & handling charges on the original order) less a 20%
restocking fee. Custom or upgraded products are non-returnable and non-refundable. Proof
of purchase is required to obtain RMA (Return Material Authorizaon) and all returns must
be in like-new condion and in the original packaging. Customers will be responsible for all
shipping charges.
Warranty Information
Earthlite oers an industry best warranty against defects in materials, design, and workman-
ship, to the original owner, as follows:
• Frame - lifeme warranty
• Foam and upholstery covering - warranted for three (3) years
• Li motors, controls, electronics - warranted for two (2) years from the original date of
purchase*
• Accessories and opons - warranted for one (1) year from the original date of purchase
This warranty does not cover damage caused by normal wear and tear, misuse, accidents,
or neglect, which includes tears in the upholstery and damage caused by cleaners. All war-
ranes are limited to repair or replacement at Earthlite’s discreon, shipping not included.
Proof of purchase is required to obtain RMA (Return Material Authorizaon) and customers
may be required to return defecve items. Internaonal customers are responsible for all
associated return costs (inbound and outbound), as well as any applicable dues and taxes.
*If within these two (2) years, there is a defect, malfuncon, or failure of the li motor or
controls, Earthlite will replace or repair the defecve component at our discreon; shipping
not included. Parts are warranted for 90 days aer replacement or 2 years from the original
date of table purchase, whichever comes later.

Contact Us
Earthlite
990 Joshua Way
Vista, CA. 92081
[phone]
[phone] Int’l
[phone] fax
[email protected]
Hours of operation:
Monday - Friday
8:00 a.m. to 5 p.m. PST
Saturday - Sunday
Closed
Visit us online at: earthlite.com
Join us on
Facebook
Follow us on
Twitter
Connect with us
on Linked In