Easiphone EASY 1 User manual

www.easiphones.co.uk
DIAGRAM OF EXTERNAL FEATURES
EASYPHONE EASY 1

TABLE OF CONTENTS
You can remove the back cover through
the gap in the lower right corner, then you
will see 2 SIM card slots and 1 micro SD
slot. see figures below:
After SIM card is installed, please tear off
the insulation label on battery connector
and put the battery into the phone properly,
then put on the back cover.
INSTALL SIM CARD PLACE BATTERY
When you receive new SMS (short
message), there is an envelope icon in the
upper left corner of the main interface, you
can press Menu > Messaging > Ok > Inbox
> OK to read SMS.
MAKE A CALL/ANSWER A CALL READ SMS
You can input telephone numbers by pressing
number buttons on keypad, then press
key to make a call. And you can press
to call contact from phonebook. When
someone calls you, just press to
answer the call.
SAVE CONTACT UNLOCK KEYPAD
Input telephone number on keypad and
then press to save, see figures below:
There is “slide to unlock” key on the right
side of Easiphone Simple 1. You can slide
down to lock, slide up to unlock.
This key is navigation key, you can
press the top of it for FM radio, down for
alarm, left to write message, right for
profiles.
TURN ON/OFF THE PHONE SHORTCUT KEYS
Long press for 3 seconds on the
keypad, the phone will be turned on/off.

INSTALL MEMORY CARD CHARGE BATTERY
If the Easiphone shows low power or can’t
be turned on, please charge it first. There
are 2 ways for charging, see figures:
When you are using dock for charging, the
indicator light on dock will turn red. If the
phone is fully charge, the indicator will
show green.
The built-in memory of GSM mobile phone
is very small, in order to use camera and
multimedia function of Easiphone Simple 1,
a micro SD card is required (which is not
included in standard package). The micro
SD card must be placed into micro SD card
slot as shown below:
QUICKLY SWITCH PROFILES CAMERA
Long press 5 seconds to switch between
three profiles: silent mode, Loud mode, and
general mode (default mode).
You can open camera from
Menu > Multimedia > Ok > Camera > Ok,
then press to take photo.
Select Menu > Settings > OK > Profiles >
General > Options > Customize > Select >
Ringtone > Change > Choose Ringtones
from the list > OK. And you can adjust
ringtone volume at the same menu by
pressing key.
FM RADIO SET RINGTONE AND RINGTONE VOLUME
Select Menu > Multimedia > OK > FM
Radio > Ok > Auto search > Yes to search
channels and save them. After searching
finished, you will see channels in channel
list. And you can select the channel and
press key to play. If you want to stop
FM radio, just press key to stop it in
FM radio interface.
ALARM AND BLUETOOTH TURN ON/OFF FLASHLIGHT
Long press key for 3 seconds, the
flashlight will be turned on/off.
You can get to the alarm setting menu by
step Menu > Organizer > Ok > Alarm > OK
> edit to set alarm. In the same “Organizer”
menu, you can find “Bluetooth” setting too.

MENU SPEED DIAL/FAMILY NUMBERS
To access main menu, press on
keypad. The menu tree is as follows:
Messaging - Write message, Inbox,
Outbox, Drafts, Sent message, SMS
settings.
Call center - Call history, Call settings,
Magic voice.
Phonebook - Add new contact.
Multimedia - Camera, Image viewer,
Video recorder, Video player, Audio player,
Sound recorder, FM radio, File manager.
SOS setting - Status, SOS number, SOS
SMS on/off, SOS SMS, Warning tone
status.
Organizer - Services, Bluetooth,
Calculator, Calendar, Alarm, Torch, Family
numbers.
Settings - Profiles, Phone settings,
Security settings, Dual SIM settings,
Connectivity, Restore settings.
When some contact is set as family
number, you can speed dial him/her. The
steps of setting family number is:
Menu > Organizer > Ok > Family numbers
> OK > Status > OK > ON > OK > Done,
and then you can set key 2~9 as family
numbers by choosing contacts from
phonebook (Save contacts in phonebook
at first). See figures:
After some contact is set as family number,
you don’t need to dial his/her full telephone
numbers every time, just long press the
corresponding key for 3 seconds in main
menu state, then his/her phone number is
dialed out.
SOS EMERGENCY CALL TURN ON/OFF SOS FUNCTION
The steps of turning on SOS status are:
Menu > SOS setting > OK > Status > On >
Ok > Done, then you will see figure as
follow:
After SOS status is turned on, then set
SOS number/SOS SMS/Warning tone
status in this menu.
RESET THE PHONE
Long press button on the back of the
phone for 5 seconds, The phone will
automatically dial the preset SOS contact
and send SOS SMS to him/her. You can
set up to 5 contacts as SOS numbers and
set 1 SOS SMS. At the same time, the
phone will sound “wawuwawu” alarm tone
(the alarm tone can be turned off in SOS
setting menu). If you make SOS call
accidentally, just press to stop it.
Please backup your personal data and
contacts before resetting the phone. The
steps of resetting the phone is:
Menu > Setting > OK > Restore settings >
Ok > Input phone password “1122” >Ok.
Then the phone will restart automatically
and it is reset.