East West Furniture Devers DVS024 User manual

Devers SwivelBacklessBarstool24
”SeatHeight
ASSEMBLY INSTRUCTIONS
SKU: DVS024
Description: DeversSwivelBacklessBarstool24”SeatHeight
ProductDimension : 23”x23”x24”.H
CubeSize : 18.2”x18.2x11.4”
NW: 17.6LBS
GW:19.8LBS
175 SouthbeltIndustrialDr,
Houston,TX77047
Email:[e-mail]

Devers SwivelBacklessBarstool24
”SeatHeight
BEFOREASSEMBLY
Thankyouforpurchasingthis qualityproduct.This product has beendesigned foreasy assemblyandconstructedfordurability.
Pleasetakethe timetoreadandfollow the assemblyinstructions carefully.
Besureto checkallpackingmaterialcarefullyforsmall partswhich may havecomelooseinsidethe cartonduringshipment.
Pleaseseparate,identify, andcountall partsandmetalhardware. Comparewith thepartlisttobe sureall partsarepresent.
If hardwareis missingoryou havedifficultyassembling this product, pleasecontact us.
IMPORTANT NOTE:
-Placeall woodenparts on acleanandsmoothsurface such as arugorcarpettoavoid theparts frombeing scratched.
-Removeallwrapping material, including staples &packingstraps beforeyoustartto assemble.
-DONOTtightenall screws andboltsuntilcompletelyassembled.
-Keepall hardwareparts out ofreachofchildren.
PARTLIST
Whenunpacking,pleasebecarefulnottodiscardanypartswiththepackaging.Beforecontinuing,please
makesure youhavethefollowing parts:
NO Description Qty Sketch NO Description Qty Sketch
A SeatFrame
1
B Footrest
1
C Leg 4

Devers SwivelBacklessBarstool24
”SeatHeight
HARDWARELIST
Whenunpacking,pleasebecarefulnottodiscardanypartswiththepackaging.Beforecontinuing,please
makesure youhaveallofthefollowinghardware:
NO Description Qty Sketch NO Description Qty Sketch
1 Bolt
(M8x40) 8 2 Lock washer
(Φ8.5xΦ13mm) 8
3 FlatWasher
(Φ8.5xΦ19m) 8
4 Allenkey
(M4mm) 1
STEP1
Attach twolegs (C) tothe seatframe(A)and Footrest(B)byusingbolts (1)and washers (2) and(3).TightenwithAllen Key(4)
Note:DO NOTtighten anyofthebolts, untilthe chairis assembled

Devers SwivelBacklessBarstool24
”SeatHeight
Attach theothertwolegs (C)to the seatframe(A) andFootrest(B) byusing bolts (1)andwashers(2) and(3). Tightenwith Allen
Key(4)
Note:DO NOTtighten anyofthebolts, untilthe chairis assembled
Put thechaironaflatlevelsurfaceto make surethechairisleveland thentighten theall bolts.
STEP2
STEP3
CAUTION:Donotputfingersinto
seatgap.