East West Furniture IRVING IRT User manual

IRVING 48
” ROUND DINING TABLE
- 1 -
ASSEMBLY INSTRUCTIONS
SKU: IRT
Description : IRVING 48” ROUND DINING TABLE
Prod ct Dimension : Ø48”x30”H
C be Size : 50.3”x50.3”x3.5” NW: 37.4 LBS
(TABLETOP) GW: 44 LBS
C be Size : 31.6”x17”x9” NW: 29.7 LBS
(PEDESTAL) GW: 33 LBS
175 Southbelt Industrial Dr,
Houston, TX 77047
Email:[e-mail]

IRVING 48
” ROUND DINING TABLE
- 2 -
BEFORE ASSEMBLY
Thank yo for p rchasing this q ality prod ct. This prod ct has been designed for easy assembly and constr cted for
d rability. Please take the time to read and follow the assembly instr ctions caref lly.
Be s re to check all packing material caref lly for small parts which may have come loose inside the carton d ring shipment.
Please separate, identify, and co nt all parts and metal hardware. Compare with part list to be s re all parts are present.
If hardware is missing or yo have diffic lty assembling this prod ct, please call for s.
IMPORTANT NOTE:
-Place all wooden parts on a clean and smooth s rface s ch as a r g or carpet to avoid the parts from being
scratched.
-Remove all wrapping material, incl ding staples & packing straps before yo start to assemble.
-DO NOT tighten all screws and bolts ntil completely assembled.
-Keep all hardware parts o t of reach of children.
PART LIST
When npacking, please be caref l not to discard any parts with the packaging. Before contin ing, please make s re yo
have the following parts:
NO Description Qty S etch NO Description Qty S etch
A Table top 1 D Leg 01 1
B Pedestal 1 E Leg 02 1
C Cross
piece 1
When npacking, please be caref l not to discard any parts with the packaging. Before contin ing, please make s re yo
have all of the following hardware:
NO Description Qty S etch NO Description Qty S etch
1 Long bolt
(M8x100mm) 4
2 Medi m bolt
(M6x40mm) 4
3 Short bolt
(M6x30mm) 8
4
Large lock
washer
(Φ8.5xΦ13mm)
4
5
Large flat
washer
(Φ8.5xΦ19mm)
4 6
Small lock
washer
(Φ6.5xΦ9mm)
4
7
Small flat
washer
(Φ6.5xΦ13mm)
4 8 Allen key
(M4) 1
HARDWARE LIST

IRVING 48
” ROUND DINING TABLE
- 3 -
Attach Legs (D), (E) to the Pedestal (B) with long bolts (1) and washers (4),(5). Tighten with Allen key
(8)
P t the cross piece (C) on top of the Pedestal, and attach with medi m bolts (2), washers (6), (7).
Tighten with Allen key (8).
STEP 1
STEP 2

IRVING 48
” ROUND DINING TABLE
- 4 -
Caref lly place the cross piece (from Step 2) on bottom side of the table top (A), attach with short
bolts (3). Tighten with Allen key (8)
Flip the table and p t on flat gro nd. Complete the assembly
STEP 3
STEP 4