East West Furniture HLUC163S User manual

HLUC163S

BEFORE ASSEMBLY
Thank you for purchasing this quality product. This product has been designed for easy assembly and
constructed for durability. Please take the time to read and follow the assembly instructions carefully.
Be sure to check all packing material carefully for small parts which may have come loose inside the
carton during shipment. Please separate, identify, and count all parts and metal hardware. Compare with
part list to be sure all parts are present.
If hardware is missing or you have difficulty assembling this product, please call for us.
IMPORTANT NOTE:
Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts
from being scratched.
Remove all wrapping material, including staples & packing straps before you start to assemble.
DO NOT tighten all screws and bolts until completely assembled.
Keep all hardware parts out of reach of children .
PART LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have the following parts:
Armrests / Legs
Seat
Backrest
Seat Cushion

HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have all of the following hardware:
NO Description Qty Sketch NO Description Qty Sketch
Bolt
Put 2 Armrests / Legs (A) stand parallel. Align the seat (B) to affix 2 Armrests / Legs (A).
Insert Bolts (1) then tighten with supplied Allen Key (3) as shown on the picture below

Align Brackrest (C) to 2 Armrests / Legs (A) and Seat (B). Insert Bolts (2) then tighten with supplied Allen Key (3)
Stand the chair in right position, check stability and then put the Seat Cushion (D) on the Seat (B)