East West Furniture VEP User manual

VERONA PARSON CHAIR
- 1 -
ASSEMBLY INSTRUCTIONS
SKU: VEP
Description : VERONA PARSON CHAIR
Product Dimension: 20.25”Wx24. "Dx39"H
Cube Size : 41.3”x22”x14.5”
NW : 35.2 LBS
GW : 41.8 LBS
175 Southbelt Industrial Dr,
Houston, TX 77047
Email:[e-mail]

VERONA PARSON CHAIR
- 2 -
BEFORE ASSEMBLY
Thank you for purchasing our product. This product has been designed for easy assembly and long-
lasting use. Please take the time to read and follow the assembly instructions carefully
Be sure to check all packing material carefully for small parts that may ha e come loose inside the carton during shipment.
Please separate, identify, and count all parts and metal hardware. Compare with the part list to be sure all parts are present.
If the hardware is missing or you ha e difficulty assembling this product, please call for us.
IMPORTANT NOTE:
-Place all wooden parts on a clean and smooth surface such as a rug or carpet to a oid the parts from being
scratched.
-Remo e all wrapping material, including staples & packing straps, before you start to assemble.
-DO NOT tighten all screws and bolts until completely assembled.
-Keep all hardware parts out of reach of children.
PART LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you
ha e the following parts:
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you
ha e all of the following hardware:
NO Descriptio Qty Sketch NO Descriptio Qty Sketch
1 Long bolt
(M6x60mm) 4
2 Short bolt
(M6x50mm) 6
3 Lock Washer
(Ø6.5xØ9) 10
4 Flat Washer
(Ø6.5xØ19) 10
5 Allen Key
(4mm) 1
6 Dowel
(Ø10x30) 1
NO Descriptio Qty Sketch NO Descriptio Qty Sketch
A Chair back 1 B Seat Frame 1
C Front Leg 2
ASSEMBLY TOOLS REQUIRED
NOT INCLUDED

VERONA PARSON CHAIR
- 3 -
Remo e the bottom co er out of the seat frame (B), as shown below, then attaching Dowel (6) to seat
frame (B).
Attach front legs (C) to the seat frame (B) by using long bolts (1) and washers (3) and (4). Tighten with
Allen Key (5).
Attach Seat frame (B) to the chair back (A) by using short bolts (2) and washers (3) and (4). Tighten
with Allen Key (5).
Note: DO NOT tighten any of the bolts until the chair assembled with all parts
STEP 1
STEP 2
STEP 3
6
B

VERONA PARSON CHAIR
- 4 -
Put the chair on a flat le el surface to make sure the chair is le el and then tighten all bolts.
Attach the bottom co er (remo ed on step 1) back on the seat frame and finish the assembly.
STEP 4
STEP 5