East West Furniture BEDFORD RECTANGULAR NIGHT STAND END TABLE... User manual

BE
D
FORD RECTANGULAR NIGHT STAND END TABLE
-
1
-
ASSEMBLY INSTRUCTIONS
SKU: BF-ET
Description : BEDFORD RECTANGULAR NIGHT STAND END TABLE
Prod ct Dimension : 19.5”x15.7”x24”
C be Size : 24.1”x17.7”x7.5”
NW: 15.4 LBS
GW: 17.6 LBS
175 Southbelt Industrial Dr,
Houston, TX 77047
Email:[e-mail]

BE
D
FORD RECTANGULAR NIGHT STAND END TABLE
-
2
-
Thank yo for p rchasing o r prod ct. This prod ct has been designed for easy assembly and long
lasting se. Please take the time to read and follow the assembly instr ctions caref lly.
Be s re to check all packing material caref lly for small parts that may have come loose inside the carton d ring shipment.
Please separate, identify, and co nt all parts and metal hardware. Compare with the part list to be s re all parts are present.
If the hardware is missing or yo have diffic lty assembling this prod ct, please call for s.
IMPORTANT NOTE:
-Place all wooden parts on a clean and smooth s rface s ch as a r g or carpet to avoid the parts from being
scratched.
-Remove all wrapping material, incl ding staples & packing straps, before yo start to assemble.
-DO NOT tighten all screws and bolts ntil completely assembled.
-Keep all hardware parts o t of reach of children.
When npacking, please be caref l not to discard any parts with the packaging. Before contin ing, please make s re yo
have the following parts:
NO Description Qt Sketch NO Description Qt Sketch
A Table Top 1 B Legs 4
C Middle
Shelf 1
When npacking, please be caref l not to discard any parts with the packaging. Before contin ing, please
make s re yo have all of the following hardware:
NO Description Qt Sketch NO Description Qt Sketch
1 Bolt
(M8x60mm) 4
2 Screw
(M4x40mm) 4
3 Flat washer
(Φ8.5xΦ19mm)
4
4 Lock washer
(Φ8.5xΦ13mm) 4
5 Allen key 1
BEFORE ASSEMBLY
PART LIST
HARDWARE LIST
ASSEMBLY TOOLS REQUIRED
NOT INCLUDED

BE
D
FORD RECTANGULAR NIGHT STAND END TABLE
-
3
-
Attach two Legs (B) to the Top (A) with Bolts (1) and Lock washers (3), Washers (4). Tighten with Allen
key (5)
Attach Middle shelf (C) to the legs (B). Attach both of the other legs to the Middle shelf (C) with Bolts
(1) and lock washers (3), washers (4). Tighten with the Allen Key (5). se the screw driver to tighten the
screws (2). as shown below.
Screw Driver is not
incl ded in package
STEP 1
STEP 2
1
4